RF SAW Filter Part Number Package Application Last Modified 802-RF417.75M-A 3.0 x 3.0 SMD CDMA450(E-Band) Mar. 2 2007 . TYPE : 417.75 MHz RF-Tx SAW Filter PART NUMBER : 802-RF417.75M-A . OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS PARAMETERS Condition Minimum Typical Maximum Units - - 417.75 - MHz 415.5 ~ 420.0 MHz - 2.1 3.2 dB Source Impedance (single ended) - - 50 - ohm Load Impedance (double ended) - - 50 - ohm Operating Temperature - -30 - +80 °C 415.5 ~ 420.0 MHz - 1.3 2.0 - Center Frequency Insertion Loss VSWR Max Input Power Stopband Attenuation - - - 30 dBm 0.3~400.0 MHz 23.0 26.0 - dB 425.5~430.0 MHz 30.0 48.0 - 430.0~1700.0 MHz 20.0 25.0 - 1700.0~2000.0 MHz 15.0 20.0 - * No Matching Network . PACKAGE DRAWING Pin Layout TESTING INVIRONMENT FREQUENCY RESPONSE A Ground B Output C Ground D Ground E Input F Ground VSWR (S11, S22) SMITH CHART Oscilent Corporation - CALL 949.252.0522 18195 East McDurmott Street . Building D . Irvine . CA 92614 . USA Fax: 949.252.0599 . E-Mail: [email protected] Part No.: Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map 802-RF417.75M-A