10Base-T Interface Module ELECTRONICS INC. EPE6114S • Designed fo IMR2 Chip • 8 Cores with Discrete Components • Robust construction allows for toughest reflow processing • Complies with or exceeds IEEE 802.3, 10Base-T Standards • 1500 Vrms Isolation (for 1 minute) Electrical Parameters @ 25° C OCL (µH Min.) Insertion Loss† (dB Max.) Return Loss (dB Min.) 100 KHz, 0.1 Vrms 1-10 MHz 5-10 MHz Pins 1-2,4-5,6-7,9-10 Xmit/Rcv Xmit/Rcv 200 -1 -15 Impedance (Ω) Common Mode Rejection (Ω) Crosstalk (dB Min.) 30-100 MHz 1-10 MHz -30 -30 100 • †Excludes all Resistor Networks for Receive Side • Xmit 1 20 Schematic Xmit 6 0.01µF 2 50 V 49.9 Ω 5 7 1:1 8 Rcv 4 49.9 Ω 50 V 19 1:1 3 14 0.01µF 18 Rcv 9 49.9 Ω 50 V 0.01µF 17 12 50 V 0.01µF 49.9 Ω 1:1 13 10 1:1 11 Package .610 (15.49) .080 (2.03) .090 (2.29) .050 (1.27) Solder 1.190 Pad (30.22) Layout PCA .995 EPE6114S (25.27) Date Code Pin 1 I.D. .450 (11.43) .260 (6.60) .005/.015 (.127/.381) .030 (.762) 0°-8° .008/.012 .203/.305 .035 (.889) .016/.020 (.406/.508) 1.150 (29.21) .050 (1.27) Unless Otherwise Specified Dimensions are in Inches /mm ± .010 /.25 PCA ELECTRONICS, INC. 16799 SCHOENBORN ST. NORTH HILLS, CA 91343 Product performance is limited to specified parameters. Data is subject to change without prior notice. CSE6114S Rev. Orig 4/14/03 TEL: (818) 892-0761 FAX: (818) 894-5791 http://www.pca.com