Pomona ® Model 5243 & 5520 Kit Do-It-Yourself SMD Grabber Test Clips Kit containing 10 pieces of 5243, one of each color. MATERIALS: Contact – Stainless steel, Type 301, ½ Hard Spring – Stainless steel, Type 302. Cap – Glass Filled Nylon. Marking: “Model 5243” Barrel – Glass filled nylon. Color: Matches color of cap. Marking: “POMONA GRABBER®” Finish: Contact – Gold plated per MIL-G-45204, Type II, 30 to 50 microinches. RATINGS: Operating Temperature: +102° C. (+216° F) Max. Operating Voltage: 30VAC / 60VDC Max. Current: 0.5 Amperes Standard Colors: Available in 10 colors: -0 Black, -1 Brown, -2 Red, -3 Orange, -4 Yellow, -5 Green, -6 Blue, -7 Violet, -8 Gray, -9 White Ordering Example: 5243-2 Color is Red Ordering 5520 “Kit” – contains one color each of the 5243-*. SIMPLIFIED ASSEMBLY PROCEDURE 1. Pull off thumb cap to expose contact connection. 2. Thread wire through thumb cap and strip 3.18 (1/8). 3. Insert stripped end through hole on contact and solder. 4. Slide thumb cap back onto contact. ORDERING INFORMATION: Model 5243 & 5520 Kit All dimensions are in inches. Tolerances (except noted): .xx = ±.02” (,51 mm), .xxx = ± .005” (,127 mm). All specifications are to the latest revisions. Specifications are subject to change without notice. Registered trademarks are the property of their respective companies. Made in USA 6/9/99 SY/EH/LS Sales: 800-490-2361 Fax: 888-403-3360 Technical Assistance: 800-241-2060 C:\Laura Goldberg\FlukeDataSheet\d5243_K5520_1_01.doc PomonaACCESS 90319 (800) 444-6785 or (425) 446-6010 More drawings available at www.pomonaelectronics.com Page 1 of 1