PO3B3126A High-Bandwidth, 4-Bit, 2-Port Bus Switch w/ Individual Enables 02/04/08 High Bandwidth Potato Chip FEATURES: DESCRIPTION: • Patented technology • High signal -3db passing bandwidth at 1.4GHz • Near-Zero propagation delay • VCC = 1.65V to 3.6V • Ultra-Low Quiescent Power: 0.1µA typical • Ideally suited for low power applications • Industrial operating temperature: -40°C to +85°C • Available in 14 pin TSSOP package Potato Semiconductor’s PO3B3126A is designed for world top performance using submicron CMOS technology to achieve GHz high bandwidth. Pin Configuration The PO3B3126A is a High-Bandwidth, 4-Bit, 2-Port Bus Switch w/ Individual Enables Bus Switch. The switch introduces no additional ground bounce noise or propagation delay. Block Diagram A0 BE0 1 14 VCC A0 2 13 BE3 B0 3 12 A3 BE1 4 11 B3 A1 5 10 BE2 B1 6 9 A2 BE2 GND 7 8 B2 A3 SW B0 SW B1 SW B2 BE0 A1 BE1 A2 SW SW B3 A B BE3 BE Pin Description Pin Name BEN A3-A0 B3-B0 VCC GND Description Switch Enable Bus A Bus B Power Ground Truth Table BEN AN BN VCC Function X Hi-Z Hi-Z GND Disconnect L Hi-Z Hi-Z VCC Disconnect VCC Connect H Bn An 1 Copyright © Potato Semiconductor Corporation PO3B3126A High-Bandwidth, 4-Bit, 2-Port Bus Switch w/ Individual Enables 12/26/08 High Bandwidth Potato Chip Maximum Ratings (Above which the useful life may be impaired. For user guidelines, not tested.) Storage Temperature ................................................ –65°C to +150°C Ambient Temperature with Power Applied ............... –40°C to +85°C Supply Voltage to Ground Potential ........................... –0.5V to +4.6V DC Input Voltage ........................................................ –0.5V to +Vcc DC Output Current................................................................... 120mA Power Dissipation ....................................................................... 0.5W Note: Stresses greater than those listed under MAXIMUM RATINGS may cause permanent damage to the device. This is a stress rating only and functional operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect reliability. DC Electrical Characteristics, 3.3V Supply (Over the Operating Range, TA = –40°C to +85°C, VCC = 3.3V ±10%) Parameters Description Min. Test Conditions Max. Typ. VIH Input HIGH Voltage Guaranteed Logic HIGH Level VIL Input LOW Voltage Guaranteed Logic LOW Level 0.8 IIH Input HIGH Current VCC = Max., VIN = VCC ±1 IIL Input LOW Current VCC = Max., VIN = GND ±1 IOZH High Impedance Output Current 0 ≤ Y, In ≤ VCC 2.0 Switch On-Resistance V µA ±1 VCC = Min., VIN = 0.0V, RON Units ION = -48 mA or -64mA VCC = Min., VIN = VCC , ION = -15 mA 10 14 12 16 Ω DC Electrical Characteristics, 2.5V Supply (Over Operating Range, TA = –40°C to +85°C, VCC = 2.5V ± 10%) Parameters Description Test Conditions Min. Typ. Max. VIH Input HIGH Voltage Guaranteed Logic HIGH Level 1.8 VCC + 0.3 VIL Inout LOW Voltage Guaranteed Logic LOW Level –0.3 0.8 IIH Input HIGH Current VCC = Max., VIN = VCC ±1 IIL Input LOW Current VCC = Max., VIN = GND ±1 IOZH High Impedance Current 0 ≤ Y, In ≤ VCC ±1 RON Switch On Resistance VCC = Min., VIN = 0.0V, ION = –48mA 12 16 VCC = Min., VIN = Vcc, ION = -15mA 14 18 Units V µA Ω 2 Copyright © Potato Semiconductor Corporation PO3B3126A High-Bandwidth, 4-Bit, 2-Port Bus Switch w/ Individual Enables 02/04/08 High Bandwidth Potato Chip Power Supply Characteristics Symbol Icc Description Quiescent Power Supply Current Test Conditions (1) Min Typ Vcc=Max, Vin=Vcc or GND - 0.1 Max Unit 3 uA Notes: 1. 2. 3. 4. 5. For conditions shown as Max. or Min., use appropriate value specified under Electrical Characteristics for the applicable device type. Typical values are at Vcc = 3.3V, 25°C ambient. This parameter is guaranteed but not tested. Not more than one output should be shorted at one time. Duration of the test should not exceed one second. VoH = Vcc – 0.6V at rated current Capacitance Parameters (TA = 25°C f = 1 MHz) Description Test Conditions Typ. Units CIN COFF Input Capacitance A/B Capacitance, Switch Off VIN = 0V VIN = 0V 3.5 4.0 pF pF CON A/B Capacitance, Switch On VIN = 0V 8.0 pF Dynamic Electrical Characteristics Over the Operating Range (TA = -40º to +85º, VCC = 3.3V ± 10%) Parameter Description Test Condition Typ. XTALK Crosstalk RL = 100Ω -60 OIRR Off-Isolation RL = 100Ω -60 BW -3dB Bandwidth RL = 100Ω 1.4 Units dB GHz Switching Characteristics over 3.3V Operating Range Parameters Description tPLH tPHL Propogation Delay tPZH tPZL Bus Enable Time tPHZ tPLZ Bus Disable Time Conditions See Test Diagram Max. Units 0.3 2.0 ns See Test Diagram 3.0 3 Copyright © Potato Semiconductor Corporation PO3B3126A High-Bandwidth, 4-Bit, 2-Port Bus Switch w/ Individual Enables 02/04/08 High Bandwidth Potato Chip Switching Characteristics over 2.5V Operating Range Parameters Description tPLH tPHL Propogation Delay tPZH tPZL Bus Enable Time tPHZ tPLZ Bus Disable Time Max. Conditions See Test Diagram Units 0.3 2.0 ns See Test Diagram 3.0 Test Circuit for Electrical Characteristics Switch Positions Test Switch tPLZ, tPZL 6.0V tPHZ, tPZH GND Prop Delay Open 6.0V VCC 200-ohm Pulse Generator VOUT VIN D.U.T 10pF CL RT 200-ohm Switching Waveforms 2.5V SEL 1.25V 3.5V 2.5V Input 0V 2.5V 1.5V tPLH Output tPZL tPHL 2.5V tPLZ VDD/2 VOH Output 1.25V VOL VDD/2 Output Voltage Waveforms Propagation Delay Times VOL +0.3V tPHZ tPZH 2.5V VOH VOH –0.3V VOL VOH VOL Voltage Waveforms Enable and Disable Times 4 Copyright © Potato Semiconductor Corporation PO3B3126A High-Bandwidth, 4-Bit, 2-Port Bus Switch w/ Individual Enables 02/04/08 High Bandwidth Potato Chip Packaging Mechanical Drawing: 14 pin TSSOP 14 0.240 0.264 0.169 0.177 1 0.193 0.201 4.90 5.10 4.3 4.5 6.1 6.7 0.047 1.20 max. SEATING PLANE 0.0256 typical 0.65 0.007 0.012 0.19 0.30 0.002 0.05 0.006 0.15 X.XX DENOTES DIMENSIONS X.XX IN MILLIMETERS 5 Copyright © Potato Semiconductor Corporation PO3B3126A High-Bandwidth, 4-Bit, 2-Port Bus Switch w/ Individual Enables 02/04/08 High Bandwidth Potato Chip Ordering Information Ordering Code Package Top-Marking TA PO3B3126ATU 14-pin TSSOP Tube Pb-free & Green PO3B3126AT -40°C to 85°C PO3B3126ATR 14-pin TSSOP Tape and reel Pb-free & Green PO3B3126AT -40°C to 85°C IC Package Information PACKAGE CODE T PACKAGE TYPE TSSOP 14 TAPE WIDTH (mm) TAPE PITCH (mm) 12 8 PIN 1 LOCATION Top Left Corner TAPE TRAILER LENGTH 39 (12”) QTY PER REEL 3000 TAPE LEADER LENGTH 64 (20”) QTY PER TUBE 96 6 Copyright © Potato Semiconductor Corporation