CATV Line Amplifier 2F1G23CP Product Features Application • GaAs Push Pull • Extremely Low Distortion • Guaranteed Broadband Power Gain • Excellent Thermal Conductivity • Single Supply Voltage @ 24V • Low DC Power Consumption • Optimal Reliability • CATV Trunk Amplifier • Optical Drive Amplifier Package Type : SOT-115J Description Hybrid Push Pull amplifier for CATV Systems up to 1000MHz in frequency. This hybrid amplifier module operates with a single voltage supply of 24V (DC), and use GaAs MMIC technology. Quick Reference Data SYMBOL PARAMETER Gp Power gain Itot Total current consumption (DC) CONDITIONS MIN. MAX. UNIT F = 45 MHz 21 24 dB F = 1000 MHz 21.5 24.5 dB Vcc = 24V 200 250 mA Limiting Values SYMBOL PARAMETER MIN. MAX. UNIT Vi RF Input Voltage (Single Tone) - +70 dBmV V DC Supply Over Voltage (5 minutes) 28 V Tstg Storage Temperature -40 +100 ℃ Tmb Operating Mounting Base Temperature -20 +100 ℃ ▪ Tel : 82-31-250-5011 ▪ All specifications may change without notice. ▪ [email protected] ▪ Version 1.0 CATV Line Amplifier 2F1G23CP CHARACTERISTICS Bandwidth 45 to 1000MHz; VCC = 24V; Tcase = 25℃; ZS = ZL = 75Ω SYMBOL PARAMETER CONDITIONS MIN TYP MAX UNIT Gp Power gain f = 45 MHz 21 22.5 24 dB f = 1000 MHz 21.5 23.0 24.5 dB SL Slope cable equivalent f = 45 to 1000 MHz - 0.5 - dB FL Flatness of frequency response f = 45 to 1000 MHz - - 0.5 dB f = 45 to 250 MHz 18.0 - - dB f = 250 to 500 MHz 17.0 - - dB f = 500 to 750 MHz 16.0 - - dB f = 750 to 1000 MHz 15.0 - - dB f = 45 to 250 MHz 20.0 - - dB f = 250 to 500 MHz 18.0 - - dB f = 500 to 750 MHz 16.0 - - dB f = 750 to 1000 MHz 15.0 - - dB f = 45 MHz - 4.5 5.5 dB f = 550 MHz - 4.5 5.6 dB f = 1000 MHz - 5.5 6.5 dB 200 220 250 mA S11 Input return loss S22 Output return loss F Itot Noise Figure Total current consumption (DC) DISTORTION Bandwidth 45 to 1000MHz; VCC = 24V; Tcase = 25℃; ZS = ZL = 75Ω SYMBOL PARAMETER CONDITIONS MIN TYP MAX UNIT CTB Composite triple beat 135 channel flat; Vo = 38dBmV - -65 -60 dBc XMOD Cross modulation 135 channel flat; Vo = 38dBmV - -65 -60 dBc CSO Composite second order distortion 135 channel flat; Vo = 38dBmV - -66 -63 dBc Notes; 135 Channels, NTSC frequency raster: 55.25MHz to 859.25MHz, +38dBmV flated output level. CTB, XMOD, CSO definitions follow NCTA definition ESD PROTECTION Gallium Arsenide Integrated Circuits are sensitive to electrostatic discharge (ESD) and can be damaged by static electricity. Proper ESD control techniques should be used when handling these devices. Some of the precautions recommended are; - Person at a workbench should be earthed via a wrist strap and a resistor. - All mains-powered equipment should be connected to the mains via an earth-leakage switch. - Equipment cases should be grounded. - Relative humidity should be maintained between 40% and 50%. - An ionizer is recommended. - Keep static materials, such as plastic envelopes and plastic trays etc. away from the workbench. ▪ Tel : 82-31-250-5011 ▪ All specifications may change without notice. ▪ [email protected] ▪ Version 1.0 CATV Line Amplifier 2F1G23CP NOTES FOR CORRECT USE 1. 2. 3. 4. +24V + 5. 6. 47㎌ 7. On the power input port (Pin#5), 47uF/35V capacitor GND is recommended. The heat sink of CATV Hybrids is to be mounted in direct contact with the metal case of the equipment. Heat conducting grease should be applied to the module/equipment interface and the unit tightly secured. Put the power off before adjusting in/output matching of the system. The unit must have a common ground with the equipment and the analyzer. Pay close attention to the input voltage not to over power the hybrid. The space between bottom of socket and the tip of the lead is recommended to have space of 2mm+ to protect the pin Do not open the plastic cover to change the matching inside the hybrid. Once opened, RFHIC will not be responsible for the hybrid. Package Dimensions (Type: SOT-115J) Pin No. Function 1 2, 3, 7, 8 5 9 RF Input Ground Vcc RF Output RFHIC Corporation (RFHIC) reserves the right to make changes to any products herein or to discontinue any product at any time without notice. RFHIC do not assume any liability for the suitability of its products for any particular purpose, and disclaims any and all liability, including without limitation consequential or incidental damages. The product specifications herein expressed have been carefully checked and are assumed to be reliable. However, RFHIC disclaims liability for inaccuracies and strongly recommends buyers to verify that the information they are using is current before placing purchase orders. RFHIC products are not intended for use in life support equipment or application where malfunction of the product can be expected to result in personal injury or death. Buyer uses or sells such products for any such unintended or unauthorized application, buyer shall indemnify, protect and hold RFHIC and its directors, officers, stockholders, employees, representatives and distributors harmless against any and all claims arising out of such use. RFHIC’s liability under or arising out of damages, claims of whatsoever kind and nature which RFHIC products could cause shall be limited in amount to the net purchase price of the products sold to buyer by RFHIC. ▪ Tel : 82-31-250-5011 ▪ All specifications may change without notice. ▪ [email protected] ▪ Version 1.0