SIL2 Series Mini-SIP Passive Delay Modules Similar 3-pin SIP refer to SP3 Series Operating Specifications - Passive Delay Lines Fast Rise Time, Low DCR High Bandwidth 2-tap 4-pin SIP refer to SL2T Series 0.35 / tr Low Distortion LC Network Tight Delay Tolerance Standard Impedances: 50 to 200 Ω Stable Delay vs. Temperature: 100 ppm/OC Operating Temperature Range -55OC to +125OC Pulse Overshoot (Pos) .................................... 5% to 10%, typical Pulse Distortion (S) ...................................................... 3% typical Working Voltage ............................................. 25 VDC maximum Dielectric Strength .......................................... 100VDC minimum Insulation Resistance ......................... 1,000 MΩ min. @ 100VDC Temperature Coefficient ............................... 100 ppm/ OC, typical Bandwidth (fC) ....................................................... 0.35/tr approx. Operating Temperature Range ............................ -55O to +125OC Storage Temperature Range ............................... -65 O to +150OC Electrical Specifications at 25OC Delay (ns) Rise Time max. (ns) DCR max. (Ohms) 50 Ohm Impedance Part Number 55 Ohm Impedance Part Number 60 Ohm Impedance Part Number 75 Ohm Impedance Part Number 93 Ohm Impedance Part Number 100 Ohm Impedance Part Number 200 Ohm Impedance Part Number 0.0 1 ± .20 1.5 ± .20 2 ± .20 2.5 ± .20 3 ± .20 4 ± .20 5 ± .25 6 ± .30 7 ± .30 8 ± .30 9 ± .30 10 ± .30 11 ± .40 12 ± .50 13 ± .60 14 ± .70 15 ± .70 16 ± .80 20 ± 1.0 −− 1.6 1.6 1.6 1.6 1.7 1.7 1.8 2.0 2.3 2.7 2.9 3.3 3.3 3.6 4.0 4.3 4.6 4.8 5.6 .10 .20 .30 .40 .50 .60 .70 .80 .85 .90 .95 1.10 1.20 1.40 1.50 1.60 1.60 1.70 1.70 2.00 SIL2-0 SIL2-1-50 SIL-1.5-50 SIL2-2-50 SIL-2.5-50 SIL2-3-50 SIL2-4-50 SIL2-5-50 SIL2-6-50 SIL2-7-50 SIL2-8-50 SIL2-9-50 SIL2-10-50 SIL2-11-50 SIL2-12-50 SIL2-13-50 SIL2-14-50 SIL2-15-50 SIL2-16-50 SIL2-20-50 SIL2-0 SIL2-1-55 SIL-1.5-55 SIL2-2-55 SIL-2.5-55 SIL2-3-55 SIL2-4-55 SIL2-5-55 SIL2-6-55 SIL2-7-55 SIL2-8-55 SIL2-9-55 SIL2-10-55 SIL2-11-55 SIL2-12-55 SIL2-13-55 SIL2-14-55 SIL2-15-55 SIL2-16-55 SIL2-20-55 SIL2-0 SIL2-1-60 SIL-1.5-60 SIL2-2-60 SIL-2.5-60 SIL2-3-60 SIL2-4-60 SIL2-5-60 SIL2-6-60 SIL2-7-60 SIL2-8-60 SIL2-9-60 SIL2-10-60 SIL2-11-60 SIL2-12-60 SIL2-13-60 SIL2-14-60 SIL2-15-60 SIL2-16-60 SIL2-20-60 SIL2-0 SIL2-1-75 SIL-1.5-75 SIL2-2-75 SIL-2.5-75 SIL2-3-75 SIL2-4-75 SIL2-5-75 SIL2-6-75 SIL2-7-75 SIL2-8-75 SIL2-9-75 SIL2-10-75 SIL2-11-75 SIL2-12-75 SIL2-13-75 SIL2-14-75 SIL2-15-75 SIL2-16-75 SIL2-20-75 SIL2-0 SIL2-1-93 SIL-1.5-93 SIL2-2-93 SIL-2.5-93 SIL2-3-93 SIL2-4-93 SIL2-5-93 SIL2-6-93 SIL2-7-93 SIL2-8-93 SIL2-9-93 SIL2-10-93 SIL2-11-93 SIL2-12-93 SIL2-13-93 SIL2-14-93 SIL2-15-93 SIL2-16-93 SIL2-20-93 SIL2-0 SIL2-1-10 SIL-1.5-10 SIL2-2-10 SIL-2.5-10 SIL2-3-10 SIL2-4-10 SIL2-5-10 SIL2-6-10 SIL2-7-10 SIL2-8-10 SIL2-9-10 SIL2-10-10 SIL2-11-10 SIL2-12-10 SIL2-13-10 SIL2-14-10 SIL2-15-10 SIL2-16-10 SIL2-20-10 SIL2-0 SIL2-1-20 SIL-1.5-20 SIL2-2-20 SIL-2.5-20 SIL2-3-20 SIL2-4-20 SIL2-5-20 SIL2-6-20 SIL2-7-20 SIL2-8-20 SIL2-9-20 SIL2-10-20 SIL2-11-20 SIL2-12-20 SIL2-13-20 SIL2-14-20 SIL2-15-20 SIL2-16-20 SIL2-20-20 1. Rise Times are measured from 20% to 80% points. 2. Delay Times measured at 50% points of leading edge. 3. Output terminated to ground through RL=ZO Dimensions in inches (mm) .120 (3.05) MAX. .490 (12.45) MAX. SIL2 Single Output Schematic SIL2 1 2 3 IN COM OUT .020 (0.51) TYP. .030 (0.76) TYP. .100 (2.54) Specifications subject to change without notice. Rhombus Industries Inc. .375 (9.53) MAX. For other values & Custom Designs, contact factory. .200 (5.08) .120 (3.05) MIN. .010 (0.25) TYP. .060 (1.52) TYP. SIL2 9901 15801 Chemical Lane, Huntington Beach, CA 92649-1595 Phone: (714) 898-0960 • FAX: (714) 896-0971 www.rhombus-ind.com • email: [email protected]