DC11 Power entry modules without line filter www.schurter.com/pg05 IEC Appliance Inlet C14 with Line Switch 1- or 2-pole C14 70° C Description Characteristics -Panel Mount: Screw-on version from front or rear side, snap-in version from front side -2 Functions: Appliance Inlet Protection class I, Line Switch 1‑ or 2‑pole -Quick connect terminals 4.8 x 0.8 mm -Alternative: version with line filter DC12 -Substitute for type KEB1; KEB2 Meets the glow wire test acc. IEC60335-1 edition 4 -Ultra-compact design -All single elements are already wired Unwired versions available on request -Line switch non-illuminated or illuminated -Ideal for application with high transient loads -Qualified for use in equipment according IEC/EN 60950 Other versions on request -Snap-in, panel thickness 1 and 3 mm -Unwired versions -Solder terminals -Line switch with other rocker marking -For protection class II Approvals -VDE License Number: 40007009 -UL License Number: E96454 References General Product Information Weblinks Approvals, RoHS, CHINA-RoHS, Mating Connectors, e-Store, Distributor-Stock-Check, Accessories Technical Data Ratings IEC Ratings UL/CSA Dielectric Strength Allowable Operation Temp. Degree of Protection Protection Class Terminal Panel Thickness s Material: Housing 10 A / 250 VAC; 50 Hz 15 A / 250 VAC; 50/60 Hz ¹⁾ > 2.5 kVAC between L-N > 3 kVAC between L/N-PE (1 min/50 Hz) -25 °C to 70 °C from front side IP 40 acc. to IEC 60529 Suitable for appliances with protection class 1 acc. to IEC 61140 Quick connect terminals 4.8 x 0.8 mm Screw: max 6 mm Mounting screw torque max 0.5 Nm Snap-in: 1.5/2/2.5 mm Thermoplastic, black, UL 94V-0 Appliance Inlet Line Switch C14 acc. to IEC/EN 60320-1, UL 498, CSA C22.2 no. 42 (for cold conditions) pin-temperature 70 °C, 10 A, Protection Class 1 Rocker switch 1 or 2 pole, non-illuminated or illuminated, acc. to IEC 61058-1 Technical details 1) Standard version 12 A / special version 15A Connectors DC11 Power entry modules without line filter www.schurter.com/pg05 Dimensions Screw on PCB mounting Snap-in mounting +0.10 2.2 0 32.15 36 ±0.1 31.2 ±0.10 +0.2 0 30 44 +0.2 0 R 27.5 27.4 32.15 0 2.5 -0.2 4.2 +0.10 2.2 0 R 2.5 ±0.10 (1.4) 36 27.2 ±0.10 31.5 31.2 ±0.1 (1.4) 3.2 6.3 R6 R4 34 R 2.5 ±0.10 M3/ø 3.6 27.2 ±0.10 34 R4 0 31.1-0.20 0 0 31.1-0.20 31.5 +0.2 0 R 2.5 -0.2 27 ±0.10 27.4 +0.2 27.5 0 4.2 Diagrams Line switch non-illuminated 2-pole Line switch illuminated 2-pole Line switch non-illuminated 1-pole 1) Line 2) Load 1) Line 2) Load 1) Line 2) Load Variants with internal connections Rated Current UL [A] Panel mounting Panel Thickness s [mm] Line Switch Illumination Color Order Number 12 Screw - 2-pole l red DC11.0021.001 15 Screw - 2-pole l red DC11.0021.006 12 Screw - 2-pole l green DC11.0031.001 12 Screw - 1-pole - DC11.0001.003 15 Screw - 1-pole - DC11.0001.007 12 Screw - 2-pole - DC11.0001.001 15 Screw - 2-pole - DC11.0001.006 12 Snap-in 1.5 2-pole l red DC11.0021.201 15 Snap-in 1.5 2-pole l red DC11.0021.206 12 Snap-in 2 2-pole l red DC11.0021.301 12 Snap-in 2.5 2-pole l red DC11.0021.401 12 Snap-in 1.5 2-pole l green DC11.0031.201 12 Snap-in 2 2-pole l green DC11.0031.301 12 Snap-in 2.5 2-pole l green DC11.0031.401 Connectors 27 ±0.10 DC11 Power entry modules without line filter www.schurter.com/pg05 Rated Current UL [A] Panel mounting Panel Thickness s [mm] Line Switch Illumination Color Order Number 12 Snap-in 1.5 1-pole - DC11.0001.203 15 Snap-in 1.5 1-pole - DC11.0001.207 DC11.0001.303 12 Snap-in 2 1-pole - 12 Snap-in 2.5 1-pole - DC11.0001.403 12 Snap-in 1.5 2-pole - DC11.0001.201 15 Snap-in 1.5 2-pole - DC11.0001.206 12 Snap-in 2 2-pole - DC11.0001.301 12 Snap-in 2.5 2-pole - DC11.0001.401 All variants according VDE (ENEC 10) approved for 10 A Packaging unit 50 Pcs Accessories Description Assorted Covers Rear Cover 0859.0047 4311.9403 Cord retaining kits Cord retaining strain relief Flat head, A 4700.0001 Countersunk, B 4700.0002 Mating Outlets/Connectors Category / Description Appliance Outlet Overview complete IEC Appliance Outlet F, Screw-on Mounting, Front Side, Solder or Quick-connect Terminal 4787 IEC Appliance Outlet F, Snap-in Mounting, Front Side, Solder or Quick-connect Terminal 4788 IEC Appliance Outlet F or H, Screw-on Mounting, Front Side, Solder, PCB or Quick-connect Terminal 5091 IEC Appliance Outlet F or H, Screw-on Mounting, Front Side, Solder or Quick-connect Terminal 5092 Appliance Outlet further types to DC11 Connector Overview complete IEC Connector C15, Rewireable, Straight 0101 IEC Connector C15A, Rewireable, Straight 0102 IEC Connector C15A, Rewireable, Straight 0102-G IEC Connector C15A, Rewireable, Angled 0112 IEC Connector C13, Rewireable, Angled 4012 Connector further types to DC11 ... Connectors DC11 Power entry modules without line filter www.schurter.com/pg05 Category / Description Power Cord Overview complete Power Cord with IEC Connector C13, Angled 0311 Power Cord with IEC Connector C13, Angled 3011 Power Cord with IEC Connector C13, Angled 3012 Power Cord with IEC Connector C13, Angled 3013 Power Cord with IEC Connector C13 3020 Power Cord further types to DC11 ... The specifications, descriptions and illustrations indicated in this document are based on Connectors current information. All content is subject to modifications and amendments.