MUR140 MUR160 Ultrafast Plastic Rectifiers FEATURES Reverse Voltage 400 to 600 Volts Forward Current 1.0 Ampere Plastic package has Underwriters Laboratories Flammability Classification 94V-0 Ideally suited for use in very high frequency switching power supplies, inverters and as a free wheeling diode Ultrafast recovery time for high efficiency Glass passivated junction High temperature soldering guaranteed: 250℃/10Seconds, 0.375” (9.5mm) lead length at 5 lbs. (2.3Kg) tension MECHANICAL DATA Cases: JEDEC DO-204AC(DO-15), molded plastic body over passivated chip Terminals: Axial leads, solder-able per MIL-STD-750, Method 2026 Polarity: Color band denotes cathode end Mounting position: Any Weight: 0.015 ounce, 0.4 gram Pb-free; RoHS-compliant 01/01/2007 Rev. 1.00 www.SiliconStandard.com 1 MUR140 MUR160 MAXIMUM RATINGS (TA=25℃ unless otherwise specified) Parameter Maximum repetitive peak reverse voltage Working peak reverse voltage Maximum DC blocking voltage Maximum average forward rectified current at TA =120℃ Peak forward surge current 8.3 ms single half sine-wave superimposed on rated load (JEDEC Method) Iat F =1.0A, TJ =25℃ Maximum instantaneous forward voltage (Note 1) at IF =1.0A, TJ =150℃ Maximum instantaneous reverse TJ =25℃ current at rated DC blocking TJ =150℃ voltage (Note 1) Maximum reverse recovery time at IF =0.5A, IR =1.0A, I rr =0.25A Maximum reverse recovery time at IF =1.0A, di/dt=50A/us, VR =30V, I rr =10% IRM Maximum forward recovery time at IF =1.0A, di/dt=100A/us, recovery to 1.0V Typical thermal resistance junction to ambient (Note 2) Operating junction and storage temperature range NOTE: Symbols MUR140 MUR160 Units VRRM VRWM VDC IF(AV) 400 400 400 600 600 600 1.0 Volts Volts Volts Amp IFSM 35.0 Amps VF 1.25 1.05 Volts IR 5.0 150 uA uA trr 50 nS trr 75 nS tfr 50 nS RθJA TJ, TSTG 50 -55 to +175 ℃/W ℃ 1. Pulse test: tp=300us, duty cycle < 2% 2. Lead length = 3/8” on P.C. Board with 1.5” x 1.5” copper surface 01/01/2007 Rev. 1.00 www.SiliconStandard.com 2 MUR140 MUR160 RATINGS AND CHARACTERISTIC CURVES (TA = 25°C , unless otherwise specified.) A 01/01/2007 Rev. 1.00 www.SiliconStandard.com 3 MUR140 MUR160 Disclaimer Information furnished by Silicon Standard Corporation is believed to be accurate and reliable. However, Silicon Standard Corporation makes no guarantee or warranty, expressed or implied, as to the reliability, accuracy, timeliness or completeness of such information and assumes no responsibility for its use, or for infringement of any patent or other intellectual property rights of third parties that may result from its use. Silicon Standard reserves the right to make changes as it deems necessary to any products described herein for any reason, including without limitation enhancement in reliability, functionality or design. No license is granted, whether expressly or by implication, in relation to the use of any products described herein or to the use of any information provided herein, under any patent or other intellectual property rights of Silicon Standard Corporation or any third parties. 01/01/2007 Rev. 1.00 www.SiliconStandard.com 4