SRE10UF-SRE15UF and SRE10UFSMS-SRE15UFSMS Solid State Devices, Inc. 14701 Firestone Blvd * La Mirada, Ca 90638 Phone: (562) 404-4474 * Fax: (562) 404-1773 [email protected] * www.ssdi-power.com DESIGNER’S DATA SHEET 0.75 AMP Part Number / Ordering Information 1/ 1000 – 1500 Volts SRE __ UF ___ __ ⏐ ⏐ ⏐ ⏐ ⏐ ⏐ ⏐ L ⏐ ⏐ ⏐ ⏐ ⏐ ⏐ ⏐ ⏐ ⏐ L 50-70 nsec 2/ L Screening = None TX = TX Level TXV = TXV Level S = S Level HIGH REVERSE ENERGY ABSORPTION CAPABILITY ULTRA FAST RECTIFIER Package __ = Axial SMS = Surface Mount Square Tab L Features: Recovery Time • • • • • • • • UF = Ultra Fast Voltage 10 = 1000 V 11 = 1100 V 12 = 1200 V 13 = 1300 V 14 = 1400 V 15 = 1500 V Ultra Fast Recovery: 50-70 nsec Max. High Reverse Energy Absorption Capability Single Chip Construction PIV to 1500 Volts Low Reverse Leakage Current Available in Surface Mount versions Metallurgically Bonded TX, TXV, and S-Level Screening Available2/ Maximum Ratings Symbol SRE10UF SRE11UF SRE12UF SRE13UF SRE14UF SRE15UF Peak Repetitive Reverse and DC Blocking Voltage VRRM VRWM VR Value Units 1000 1100 1200 1300 1400 1500 Volts Reverse Energy Voltage Surge (Discharge Voltage Vs from 0.0022µF capacitor) Vs 200V GREATER THAN RATED VR Volts Average Rectified Forward Current (Resistive Load, 60 Hz Sine Wave, TA = 25ºC) Io 0.75 Amps IFSM 20 Amps Top & Tstg -65 to +175 ºC RθJL RθJE 40 35 ºC/W Peak Surge Current (8.3 ms Pulse, Half Sine Wave Superimposed on Io, Allow Junction to Reach Equilibrium Between Pulses, TA = 25ºC) Operating & Storage Temperature Maximum Thermal Resistance Junction to Lead, L = 3/8 " Junction to End Tab Notes: 1/ For Ordering Information, Price, Operating Curves, and Availability – Contact Factory. 2/ Screening Based on MIL-PRF-19500. Screening Flows Available on Request. NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. Axial Leaded DATA SHEET #: RU0121D SMS (Square) DOC SRE10UF thru SRE15UF Solid State Devices, Inc. 14701 Firestone Blvd * La Mirada, Ca 90638 Phone: (562) 404-4474 * Fax: (562) 404-1773 [email protected] * www.ssdi-power.com Electrical Characteristics Instantaneous Forward Voltage Drop (IF = 0.75 Adc, TA = 25ºC, 300 µs pulse) Instantaneous Forward Voltage Drop (IF = 3 Adc, TA = -55ºC, 300 µs pulse) Reverse Leakage Current (Rated VR, TA = 25ºC, 300 µs pulse minimum) Reverse Leakage Current (Rated VR, TA = 100ºC, 300 µs pulse minimum) Junction Capacitance (VR = 10 Vdc, TA = 25ºC, f = 1MHz) SRE10UF-11UF SRE12UF-14UF SRE15UF Reverse Recovery Time (IF = 500 mA, IR = 1A, IRR = 0.25A, TA = 25ºC) Symbol Max Units VF 2.5 Vdc VF 2.7 Vdc IR 10 μA IR 500 μA CJ 50 pF trr 50 60 70 nsec Case Outline: (Axial) DIMENSIONS D B ØC D ØA DIM A B C D MIN --.130” .027” 1.00” MAX .160” .190” .033” --- Case Outline: (SMS) B DIMENSIONS A A C DIM A B C D MIN .160” .180” .022” .002” MAX .180” .240” .028” --- D NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: RU0121D DOC