Industrial Power Supplies TBL Series, 15 to 150 Watt CB Scheme Features IEC/EN 60950-1 UL 1310 Class II UL 508 ◆ Low profile case, module depth only 55mm ◆ Fits into flat control panels used in building automation ◆ Safety class ll product ◆ UL 1310 class II, NEC class 2 compliance ◆ UL508 listed ◆ 5 power ranges from 15 to 150 W ◆ Universal input range 85 to 264 VAC ◆ Operating temperature range: –25 °C to +70 °C max. ◆ Adjustable Output Voltage ◆ Short circuit and overload protection ◆ DC–OK indicator ◆ Easy snap-on mounting on DIN-rail ◆ 3 year product warranty The TBL series is a new range of small DIN-rail mount power supplies which have been designed particularly with building- and factory automation applications in mind. The ultra-compact low profile cases fit in the standardized wall mounted control panels used in the building automation industry. The power supplies can be operated at full load across an ambient temperature range of –25°C to +60°C without need of additional cooling. Universal input voltage range and full compliance with all important safety and EMC standards qualifies the TBL series power supplies for worldwide markets. For commercial and residential applications requesting safety class ll the product is approved to UL 1310. Models Order Code Output Power (max.) Output Voltage* (nom.) Output Current (max.) Efficiency (typ.) TBL 015-105 12 W 5.0 VDC 2.4 A 73 % TBL 015-112 15 W 12 VDC 1.25 A 79 % TBL 015-124 15 W 24 VDC 0.63 A 81 % TBL 030-112 12 VDC 2.5 A 81 % TBL 030-124 24 VDC 1.25 A 83 % TBL 060-112 54 W 12 VDC 4.5 A 83 % TBL 060-124 60 W 24 VDC 2.5 A 85 % TBL 090-112 72 W 12 VDC 6.0 A 86 % TBL 090-124 90 W 24 VDC 3.75 A 86 % TBL 150-112 120 W 12 VDC 10 A 84 % TBL 150-124 150 W 24 VDC 6.25 A 87 % 30 W * adjustable http://www.tracopower.com Page 1 of 3 Industrial Power Supplies TBL Series 15 to 150 Watt Input Specifications Input voltage – nominal 100 – 240 VAC – AC range 85 – 264 VAC (output power derating 5 %/V for opertion below 90 VAC) Input frequency 47 – 63 Hz Harmonic limits EN 61000-3-2, Class A Output Specifications Output voltage adjustable range Output regulation 5 VDC model: 5.0 – 5.2 VDC 12 VDC models: 12 – 16 VDC 24 VDC models: 24 – 28 VDC 1 % Ripple and noise (20MHz bandwidth) < 100 mV pk-pk Electronic short circuit protection current limitation at 100 – 150 % typ. (automatic recovery) Hold-up time 115 VAC min. 10 ms 230 VAC min. 20 ms General Specifications Temperature ranges – Operating – 25 °C to +70 °C max. Power derating 2.5 %/K above 60 °C Humidity (non condensing) 5 – 95 % rel. H Temperature coefficient 0.02 %/K Safety standards UL 508, UL 1310, class II IEC/EN 60950-1, UL 60950-1, EN 50178, EN 60204, EN 61558-2-8 CSA C22.2 No. 60950-1 2003 Safety approvals – CB report (TBL 150 models pending) – UL approval – CSA certification – GS certification IEC/EN 60950-1 www.tracopower.com/products/tbl_cb60950-1.pdf UL 508 listed www.tracopower.com/products/tbl_ul508.pdf UL 1310 listed www.tracopower.com/products/tbl_ul1310.pdf UL 60950-1, CSA 60950-1-03 www.tracopower.com/products/tbl_csa60950-1.pdf www.tracopower.com/products/tbl_gs.pdf Electromagnetic compatibility (EMC), emissions EN 61000-6-3 – Conducted RI suppression on input EN 55022 class B – Radiated RI suppression EN 55022 class B Electromagnetic compatibility (EMC), immunity – Electrostatic discharge (ESD) – Radiated RF field immunity – Electrical fast transient / burst immunity – Surge immunity line – ground – Surge immunity line – line – Surge immunity output – Immunity to conducted RF disturbances – Mains voltage dips and interruptions http://www.tracopower.com EN 61000-6-2 EN 61000-4-2 EN 61000-4-3 EN 61000-4-4 EN 61000-4-5 EN 61000-4-5 EN 61000-4-5 EN 61000-4-6 EN 61000-4-11 4 kV / 8 kV 3 V/m 1 kV / 0.5 kV 2 kV 1 kV 0.5 kV 3 V 30 % /10 mS, 60 % /100 mS Page 2 of 3 Industrial Power Supplies TBL Series 15 to 150 Watt General Specifications Protection class class II as per IEC/EN 61140 Case protection IP 20 (IEC 60529) Environment – Vibration acc. IEC 60068-2-6; – Shock acc. IEC 60068-2-27 3 axis, sine sweep, 10 – 55 Hz, 0.075 mm 3 axis, 15 g half sine, 11 ms Enclosure material plastic FR2010-110C (UL 94V-0 rated) Mounting DIN-rails as per EN 50022-35x15/7.5 (snap-on with self-locking spring) Connection screw terminals with combi-type screw heads for wire size 0.5 – 1.5 mm² Installation instructions www.tracopower.com/products/tbl_inst.pdf Case Dimensions 59.5 (2.34) 37.1 (1.46) 21.1 (0.83) 89.5 (3.52) 69.5 (2.74) 45.0 (1.77) Vadj 54.5 (2.15) Model Width (W) mm (inch) Weigth g (oz) TBL 015 26.3 (1.04) 100 (3.53) TBL 030 52.5 (2.07) 160 (5.64) TBL 060 70.0 (2.76 230 (8.11) TBL 090 105.0 (4.13) 340 (12.0) TBL 150 175 (6.89) 625 (22.0) W Dimensions in [mm], () = Inch Tolerances: ±0.5 mm (±0.02) Wiring Description Wire size AC Input all models: L, N only (2 pin terminal) AWG 26 – 16 / 1.5 mm² max. DC Output 15 – 30 W models: single terminal AWG 26 – 14 / 1.5 mm² max. DC Output 60 – 150 W models: double terminal AWG 26 – 14 / 1.5 mm² max. Specifications can be changed any time without notice. Rev. 10/08 Jenatschstrasse 1 · CH-8002 Zurich · Switzerland Tel. +41 43 311 45 11 · Fax +41 43 311 45 45 · [email protected] · www.tracopower.com Page 3 of 3