A-BRIGHT A-BRIGHT INDUSTRIAL CO., LTD. SURFACE MOUNT CHIP LED LAMPS Top View LEDs Part Number: 67-21SURC Package outlines & Re-flow Profile Reflow Temp/Time Soldering iron Basic spec is U 5sec when 260℃. If temperature is higher, time should be shorter (+10℃Æ -1sec ).Power dissipation of iron should be smaller than 15W, and temperatures should be controllable .Surface temperature of the device should be under 230℃ . For Reflow Soldering ITEM MATERIALS Resin (mold) Epoxy Lens color Water Clear Printed circuit board BT Material AlGaInP Emitted color Hyper Red NOTES: 1. All dimensions are in millimeters (inches). 2. Tolerances are ±0.1mm (0.004inch) unless otherwise noted. 3. Polarity referring onto the cathode mark is reversed on the red. 2006/10/11 A-BRIGHT A-BRIGHT INDUSTRIAL CO., LTD. SURFACE MOUNT CHIP LED LAMPS Part Number: 67-21SURC ELECTRO-OPTICAL CHARACTERISTICS Parameter (TA=25℃) Value Test Symbol Condition MIN. TYP. MAX. Viewing angle at 50% IV IF=20mA 2θ1/2 Forward voltage IF=20mA VF Luminous intensity IF=20mA IV Peak Wavelength IF=20mA λp Dominant Wavelength IF=20mA Spectral Line Half-Width Reverse current Deg 120 2.0 2.4 V 200 300 − mcd − 630 − nm λd − 625 − nm IF=20mA △λ − 20 − nm VR=5V IR 10 µA ESD 2000 mA Electrostatic Discharge − Absolute maximum ratings Parameter Unit (TA=25℃) Symbol Value Unit Forward current IF 25 mA Peak pulsing current (1/10 duty f=1kHz) IFP 60 mA Power Dissipation PD 60 mW Reverse voltage VR 5 V Operating temperature range Top -40 ~+85 ℃ Storage temperature range Tstg -40 ~+100 ℃ 2006/10/11 A-BRIGHT A-BRIGHT INDUSTRIAL CO., LTD. SURFACE MOUNT CHIP LED LAMPS Part Number: 67-21SURC Test items and results of reliability Test Sample Size Ac/Re Hours/Cycle NO Item Test Conditions 1 Reflow TEMP：240±5℃ Min. 5sec. 6 MIN. 22 PCS 0/1 2 Temperature Cycle H：+100℃ 15min ∫ 5min L：-40℃ 15min 300 CYCLES 22 PCS 0/1 3 Thermal Shock H：+100℃ 5min ∫ 10set L：-10℃ 5min 300 CYCLES 22 PCS 0/1 4 High Temperature Storage TEMP：100℃ 1000 HRS 22 PCS 0/1 5 Low Temperature Storage TEMP：-55℃ 1000 HRS 22 PCS 0/1 6 DC Operating Life IF=20mA 1000 HRS 22 PCS 0/1 7 High Temperature / High Humidity 85℃ / 85%RH 1000 HRS 22 PCS 0/1 ＊Refer to reliability test standard specification for in this line. 2006/10/11 A-BRIGHT A-BRIGHT INDUSTRIAL CO., LTD. SURFACE MOUNT CHIP LED LAMPS Part Number: 67-21SURC Typical Electro-Optical Characteristics 2006/10/11 A-BRIGHT A-BRIGHT INDUSTRIAL CO., LTD. SURFACE MOUNT CHIP LED LAMPS Part Number: 67-21SURC Typical Electro-Optical Characteristics 2006/10/11