RoHS Compliant Model RFP-150-100RCGF-S Flanged Resistor 150 Watts, 100Ω General Specifications Resistive Element Substrate Cover Mounting Flange Lead(s) Operating Temperature Thick film Beryllium oxide ceramic Alumina ceramic Copper, nickel plated per QQ-N-290 99.9% pure silver (.005” thick) -55 to +150°C (see de rating chart) Tolerance is ±0.010”, unless otherwise specified. Designed to meet of exceed applicable portions of MIL-E-5400. All dimensions in inches. Electrical Specifications Features: • RoHS Compliant • 150 Watts • DC – 2.0 GHz • Beryllium oxide Ceramic Resistance Value: Power: Frequency Range: Capacitance 100 Ohms, ± 5% 150 Watts DC – 2.0 GHz 3.5 pF Specification based on unit properly installed using suggested mounting instructions and a 50 ohm nominal impedance. Specifications subject to change. • Welded Silver Leads • Non-Nichrome Resistive Element • 100% Tested • RoHS Compliant Outline Drawing Dimensions inches 150-100RCGF-S (097) Rev B Available on Tape and Reel For Pick and Place Manufacturing. USA/Canada: Toll Free: Europe: (315) 432-8909 (800) 544-2414 +44 2392-232392 Model RFP-150-100RCGF-S RoHS Compliant Typical Performance: Derating: Mounting Footprint and Procedure: 150-100RCGF-S (097) Rev B USA/Canada: Toll Free: Europe: (315) 432-8909 (800) 544-2414 +44 2392-232392 Available on Tape and Reel For Pick and Place Manufacturing.