RoHS Compliant Model RFP-50-50RCG-S Flanged Resistor 50 Watts, 50Ω General Specifications Resistive Element Substrate Cover Mounting Flange Lead(s) Operating Temperature Thick film Beryllium oxide ceramic Alumina ceramic Copper, nickel plated per QQ-N-290 99.9% pure silver (.005” thick) -55 to +150°C (see de rating chart) Tolerance is ±0.010”, unless otherwise specified. Designed to meet of exceed applicable portions of MIL-E-5400. All dimensions in inches. Features: 50 Watts • DC – 1.5 GHz • Beryllium oxide Ceramic • Welded Silver Leads Electrical Specifications Resistance Value: Power: Frequency Range: Capacitance 50 Ohms, ± 5% 50 Watts DC – 1.5 GHz 3.5 pF Specification based on unit properly installed using suggested mounting instructions and a 50 ohm nominal impedance. Specifications subject to change. • Non-Nichrome Resistive Element • 100% Tested • RoHS Compliant Outline Drawing Dimensions inches 50-50RCG-S (097) Rev C Available on Tape and Reel For Pick and Place Manufacturing. USA/Canada: Toll Free: Europe: (315) 432-8909 (800) 544-2414 +44 2392-232392 Model RFP-50-50RCG-S RoHS Compliant Derating: Mounting Footprint and Procedure: 50-50RCG-S (097) Rev C USA/Canada: Toll Free: Europe: (315) 432-8909 (800) 544-2414 +44 2392-232392 Available on Tape and Reel For Pick and Place Manufacturing.