BCM5364/BCM5364P ® SENTRY 5 PRODUCT LINE: BCM5364/BCM5364P SECURED SWITCH PROCESSORS FEATURES SUMMARY OF BENEFITS • The most highly integrated access security processors • 5-port 10/100 Ethernet switch with integrated PHY (TX/FX) • System-on-a-chip solution offers optimal price/performance • IEEE 802.1Q (VLAN) support; IEEE 802.1P (4 Priority Queues - CoS, QoS), DiffServ, ToS support; IEEE 802.1D (Spanning Tree) support • 802.1X protocols, IP multicast, IGMP snooping for video streaming applications, broadcast suppression, and hosting of multiple subnets • 128-KB on-chip packet buffer • General purpose 200-MHz MIPS32™ Processor· • 8 KB of instruction cache, 4 KB of data cache • Supports Linux®, VxWorks® operating systems • BCM5364P supports PCI 2.2, 32-bit/33-MHz host/slave interface • Supports four additional PCI devices in host mode • Extensive interface flexibility • Interface to flash memory (up to 32 MB) • Interface to SDRAM/DDRAM (up to 512 MB, 100 MHz) • GPIO, USB, UART interface • JTAG/EJTAG support ratio and form factor, low power dissipation, and fastest time to market • Integration of managed five-port Fast Ethernet switch • Integration of MIPS32 CPU with silicon-proven IPSec processor facilitates complete packet processing in one pass for multiple policy-based packet routing and/or packet transformations (firewall, NAT, VPN, QoS) • Enables advanced application development with industrystandard operating systems/platforms/tools • Widely proliferated high-performance MIPS32 CPU enables advanced application development with industry-standard operating systems/platforms/tools • Extensive application software offered • NAT, filtering (IP, TCP), dynamic firewall, DMZ • Ethernet routing, static routing, DHCP server/client • Compatible with other Broadcom devices, enabling optimal system-level form factor, costs, and power dissipation • 400-pin PBGA package • Low power, 1.8V core, 3.3V I/O operation • Linux Open Source application software support • Third-party software support BCM5364/5364P-Based System Applications BCM5364-Based Wired Home Router BCM5364P-Based Wireless Router SDRAM (Up to 512 MB) BCM5365 Magnetics Magnetics Magnetics Magnetics RJ-45 RJ-45 RJ-45 RJ-45 Magnetics RJ-45 TX/RX Wireless MAC BCM2050 BCM430X PCI BCM5364P BCM5365 Clock (25 MHz) Magnetics Magnetics Magnetics Magnetics RJ-45 RJ-45 RJ-45 RJ-45 4-Port 10/100 LAN DMZ 4-Port 10/100 LAN 10/100 WAN FLASH (Up to 64 MB) BCM5364 FLASH (2 MB) Clock (25 MHz) SDRAM(32MB) Magnetics RJ-45 10/100 WAN OVERVIEW SDRAM I/F USB GPIO UART On-Chip Bus FLASH I/F (32-Bit/33-MHz) 4-KB D-CACHE On-Chip Bus PCI 2.2 Host On-Chip Bus 8-KB I-CACHE 200-MHz MIPS32 Core MMU Symmetric Key Engine 75 Mbps On-Chip Bus Ethernet MAC/MII Ethernet Switch Controller 4-Port 10/100 LAN PHY 10/100 WAN PHY 128-KB Packet Buffer Note: PCI Interface Supported in 5365P Only Broadcom's BCM5364 and BCM5364P, two System-On-Chips, are the most highly integrated access switch processor there are. The BCM5364/BCM5364P also features an on-chip, five-port 10/100 Ethernet switch with management features. This switch processor also offers extensive processor and interface integration featuring an integrated 200-MHz MIPS32™ core, UART, flash and SDRAM/ DDRAM interfaces. The BCM5364P also supports a PCI interface. Both the devices support IPSec encryption and authentication in a single pass. The integrated 200-MHz MIPS32™ core of the BCM5364/BCM5364P has a 2-way set-associative 8-KB instruction cache and a 4-KB data cache The CPU includes the MMU, which enables support for various RTOS. The BCM5364/BCM5364P also supports interfaces that enable systemlevel cost savings, a better form factor, and lower power dissipation. The BCM5364/BCM5364P supports up to 512 MB of SDRAM/DDRAM and 64 MB of flash memory. The BCM5364P also supports the PCI version 2.2, 32-bit/33-MHz host interface, allowing enumeration of four external PCI peripherals as a way to extend system functionality. The UART enables a glueless interface to serial devices such as modems. Broadcom provides its proven API and drivers for integration with thirdparty application software. Broadcom also offers application software to build complete system applications. Application software support includes functions such as firewall (dynamic firewall, DMZ hosting, filtering-IP/TCP, NAT/PAT), VPN (IKE engines, IPSec drivers and API, PPTP-passthrough, PPPoE client-PAP and CHAP authentication), QoS/CoS/ToS (static and dynamic Ethernet routing, VLAN tagging), and many other features. A single BCM5364/BCM5364P based platform is easy to reuse for other types of access to market segment equipment ranging in throughput performance from T1/E1 to 100 Mbps. This equipment includes wireless and wired home/residential and SOHO firewall and VPN appliances, wireless access points, and many types of customer premises equipment (CPE) devices. Broadcom®, the pulse logo, and Connecting everything® are trademarks of Broadcom Corporation and/ or its subsidiaries in the United States and certain other countries. All other trademarks mentioned are the property of their respective owners. ® BROADCOM CORPORATION 16215 Alton Parkway, P.O. Box 57013 Irvine, California 92619-7013 © 2004 by BROADCOM CORPORATION. All rights reserved. 5364_5364P-PB00-R 04/01/04 Phone: 949-450-8700 Fax: 949-450-8710 E-mail: [email protected] Web: www.broadcom.com