Crystal oscillator HIGH-STABILITY HIGH-FREQUENCY OSCILLATOR HG-1000/2000 series • Cylindrical AT crystal unit built-in, thus assuring high reliability. • Excellent shock resistance and heat resistance. • Low current consumption. Actual size Specifications (characteristics) HG-1012JA Item HG-2012JA Symbol Output frequency range Max. supply voltage Power source voltage Operating voltage Storage temperature Temperature range Operable temperature Soldering condition f0 1.5000 MHz to 28.63636 MHz VDD-GND -0.5V to +7.0V VDD 5.0V ±0.25V TSTG -55˚C to +125˚C Current consumption Duty High output voltage Low output voltage Output load condition Output rise time Output fall time Oscillation start up time Aging -40˚C to + 85˚C TSOL Under 260˚C within 10 sec. x 2 times AV: ±20ppm, BV: ±25ppm Ta= -20˚C to +70˚C BX: ±25ppm Ta= -40˚C to +85˚C lop 10mA max. No load condition tW/t 40% to 60% 1/2 VDD level VOH VDD -0.4V min. IOH= -0.8mA VOL CL 0.4V max. IOL=3.2mA 15pF max. 8ns max. 20%→80% VDD level 4ms max. Time at 4.75V to be 0 sec. tTHL 80%→20% VDD level tOSC fa ±5ppm/year max. ±2ppm/year max. Ta=25˚C S.R. ±10ppm max. ±2ppm max. Three drops on a hard wooden board from 75 cm or excitation test with 3000G x 0.3ms x 1/2sine wave in 3 directions External dimensions (Unit: mm) Recommended soldering pattern (Unit: mm) NO. Pin terminal 1 2 3 4 Ts GND OUT VDD 1.3 3.8 1.3 3.0 8.65 9.8 max. 4.06 HG2012 AV 1.5000M E 9357A 4.7 max. #3 #1 SV: ±15ppm, AV: ±20ppm BX: ±25ppm, CX: ±30ppm tTLH Shock resistance #4 VDD =4.75V to 5.25V TOPR ∆f/f0 Frequency stability Remarks Specifications #2 0.51 5.08 Do not connect TS-pin external device. 41 0.25 min. 3.0 0.25 5.8 14.0 max. 7.62 THE CRYSTALMASTER ENERGY SAVING EPSON EPSON offers effective savings to its customers through a wide range of electronic devices, such as semiconductors, liquid crystal display (LCD) modules, and crystal devices. These savings are achieved through a sophisticated melding of three different efficiency technologies. Power saving technology provides low power consumption at low voltages. Energy Saving Space saving technology provides further reductions in product size and weight Power Saving through super-precise processing and high-density assembly technology. Space Saving Time saving technology shortens the time required for design and development Time Saving on the customer side and shortens delivery times. Our concept of Energy Saving technology conserves resources by blending the essence of these three efficiency technologies. The essence of these technologies is represented in each of the products that we provide to our customers. In the industrial sector, leading priorities include measures to counter the greenhouse effect by reducing CO2, measures to preserve the global environment, and the development of energyefficient products. Environmental problems are of global concern, and although the contribution of energyResource saving technology developed by Saving EPSON may appear insignificant, we seek to contribute to the development of energy-saving products by our customers through the utilization of our electronic devices. EPSON is committed to the conservation of energy, both for the sake of people and of the planet on which we live. SEIKO EPSON CORP. QUARTZ DEVICE DIVISION acquired ISO9001 and ISO14001 certification by B.V.Q. I. (Bureau Veritas Quality International) . ISO9001 in October, 1992. ISO14001 in November,1997. NOTICE No part of this material may be reproduced or duplicated in any form or by any means without the written permission of Seiko Epson. Seiko Epson reserves the right to make changes to this material without notice. Seiko Epson does not assume any liability of any kind arising out of any inaccuracies contained in this material or due to its application or use in any product or circuit and, further, there is no representation that this material is applicable to products requiring high level reliability, such as, medical products. Moreover, no license to any intellectual property rights is granted by implication or otherwise, and there is no representation or warranty that anything made in accordance with this material will be free from any patent or copyright infringement of a third party. This material of portions there may contain technology or the subject relating to strategic products under the control of the Foreign Exchange and Foreign Trade Control Law of Japan and may require an export license from the Ministry of International Trade and Industry or other approval from another government agency.