EVERLIGHT 67-31F-RSC-AX2Y2B9Z5-CT

EVERLIGHT ELECTRONICS CO., LTD.
Technical Data Sheet
Power Top View LED With Lens
67-31F/RSC-AX2Y2B9Z5/CT
Features
․P-LCC-3 package.
․High flux output.
․High current capability.
․White package.
․Optical indicator.
․Colorless clear window.
․Ideal for backlight and light pipe application.
․Inter reflector.
․Wide viewing angle.
․Suitable for automatic placement equipment.
․Suitable for reflow and wave solder processes.
․Available on tape and reel (12mm Tape).
․Pb-free.
․The product itself will remain within RoHS compliant version.
Descriptions
The 67-31F series is available in soft orange, red and yellow. Due to the package design, the
LED has wide viewing angle and optimized light coupling by inter reflector. This feature
makes the ideal for light pipe application. The low current requirement makes this device
ideal for portable equipment or any other application where power is at a premium.
Applications
․Indicator and backlight for audio and video equipment.
․Indicator and backlight in office and family equipment.
․Flat backlight for LCD’s, switches and symbols.
․Light pipe application.
․General use.
Device Selection Guide
Chip
Emitted Color
Resin Color
Brilliant Red
Water Clear
Material
AlGaInP
Everlight Electronics Co., Ltd.
http://www.everlight.com
Rev. 1
Page: 1 of 10
Device No. : DSE-67F-011
prepared date: 25-Apr-2007
Prepared by: Josh Chou
EVERLIGHT ELECTRONICS CO., LTD.
67-31F/RSC-AX2Y2B9Z5/CT
Package Dimensions
Note: The tolerances unless mentioned is ±0.1mm; Unit = mm
Everlight Electronics Co., Ltd.
http://www.everlight.com
Rev. 1
Page: 2 of 10
Device No. : DSE-67F-011
prepared date: 25-Apr-2007
Prepared by: Josh Chou
EVERLIGHT ELECTRONICS CO., LTD.
67-31F/RSC-AX2Y2B9Z5/CT
Absolute Maximum Ratings (TA=25℃)
Parameter
Symbol
Rating
Unit
Reverse Voltage
VR
5
V
Forward Current
IF
70
mA
IFP
200
mA
Power Dissipation
Pd
200
mW
Electrostatic Discharge(HBM)
ESD
2000
V
Operating Temperature
Topr
-40 ~ +85
℃
Storage Temperature
Tstg
-40 ~ +90
℃
Soldering Temperature
Tsol
Peak Forward Current
(Duty 1/10 @1KHz)
Reflow Soldering : 260 ℃ for 10 sec.
Hand Soldering : 350 ℃ for 3 sec.
Electronic Optical Characteristics:
Parameter
Symbol
Min.
Typ.
Max.
Unit Condition
Luminous Intensity
Iv
2250
-----
4500
mcd
IF=50mA
Viewing Angle
2θ1/2
-----
60
-----
deg
IF=50mA
Peak Wavelength
λP
-----
632
-----
nm
IF=50mA
Dominant Wavelength
λd
617.5
-----
633.5
nm
IF=50mA
Spectrum Radiation
Bandwidth
△λ
-----
20
-----
nm
IF=50mA
Forward Voltage
VF
2.15
-----
2.75
V
IF=50mA
Reverse Current
IR
-----
-----
10
μA
VR=5V
Notes:
1. Tolerance of Luminous Intensity ±11%
2. Tolerance of Dominant Wavelength ±1nm
3. Tolerance of Forward Voltage ±0.1V
Everlight Electronics Co., Ltd.
http://www.everlight.com
Rev. 1
Page: 3 of 10
Device No. : DSE-67F-011
prepared date: 25-Apr-2007
Prepared by: Josh Chou
EVERLIGHT ELECTRONICS CO., LTD.
67-31F/RSC-AX2Y2B9Z5/CT
Bin Range of Luminous Intensity
Bin
Min
Max
X2
2250
2850
Y1
2850
3600
Y2
3600
4500
Unit
Condition
mcd
IF=50mA
Unit
Condition
nm
IF=50mA
Unit
Condition
V
IF=50mA
Bin Range of Dominant Wavelength
Bin Code
Min.
Max.
E4
617.5
621.5
E5
621.5
625.5
E6
625.5
629.5
E7
629.5
633.5
Bin Range of Forward Voltage
Group
B9
Bin
Min
Max
2
2.15
2.35
3
2.35
2.55
4
2.55
2.75
Notes:
1. Tolerance of Luminous Intensity ±11%
2. Tolerance of Dominant Wavelength ±1nm
3. Tolerance of Forward Voltage ±0.1V
Everlight Electronics Co., Ltd.
http://www.everlight.com
Rev. 1
Page: 4 of 10
Device No. : DSE-67F-011
prepared date: 25-Apr-2007
Prepared by: Josh Chou
EVERLIGHT ELECTRONICS CO., LTD.
67-31F/RSC-AX2Y2B9Z5/CT
Typical Electro-Optical Characteristic Curves
Everlight Electronics Co., Ltd.
http://www.everlight.com
Rev. 1
Page: 5 of 10
Device No. : DSE-67F-011
prepared date: 25-Apr-2007
Prepared by: Josh Chou
EVERLIGHT ELECTRONICS CO., LTD.
67-31F/RSC-AX2Y2B9Z5/CT
Label explanation
CAT: Luminous Intensity Rank
HUE: Dom. Wavelength Rank
REF: Forward Voltage Rank
Reel Dimensions
Note: The tolerances unless mentioned is ±0.1mm,Unit = mm
Everlight Electronics Co., Ltd.
http://www.everlight.com
Rev. 1
Page: 6 of 10
Device No. : DSE-67F-011
prepared date: 25-Apr-2007
Prepared by: Josh Chou
EVERLIGHT ELECTRONICS CO., LTD.
67-31F/RSC-AX2Y2B9Z5/CT
Carrier Tape Dimensions; Loaded quantity per reel 1500 PCS/reel
Note: Tolerances Unless Dimension ±0.1mm Unit = mm
Moisture Resistant Packaging
Label
Aluminum moisture-proof bag
Desiccant
Label
Everlight Electronics Co., Ltd.
http://www.everlight.com
Rev. 1
Page: 7 of 10
Device No. : DSE-67F-011
prepared date: 25-Apr-2007
Prepared by: Josh Chou
EVERLIGHT ELECTRONICS CO., LTD.
67-31F/RSC-AX2Y2B9Z5/CT
Reliability Test Items and Conditions
The reliability of products shall be satisfied with items listed below.
Confidence level:90%
LTPD:10%
No.
Items
Test Condition
Test
Hours/Cycles
Sample
Size
Ac/Re
1
Reflow Soldering
Temp. : 260℃±5℃
Min. 5sec.
6 min
22 PCS.
0/1
300 Cycles
22 PCS.
0/1
300 Cycles
22 PCS.
0/1
H : +100℃ 15min
2
Temperature Cycle
∫ 5 min
L : -40℃ 15min
H : +100℃ 5min
3
Thermal Shock
∫ 10 sec
L : -10℃ 5min
4
High Temperature Storage
Temp. : 100℃
1000 Hrs.
22 PCS.
0/1
5
Low Temperature Storage
Temp. : -40℃
1000 Hrs.
22 PCS.
0/1
6
DC Operating Life
IF = 20 mA
1000 Hrs.
22 PCS.
0/1
7
High Temperature / High
Humidity
85℃/ 85%RH
1000 Hrs.
22 PCS.
0/1
Everlight Electronics Co., Ltd.
http://www.everlight.com
Rev. 1
Page: 8 of 10
Device No. : DSE-67F-011
prepared date: 25-Apr-2007
Prepared by: Josh Chou
EVERLIGHT ELECTRONICS CO., LTD.
67-31F/RSC-AX2Y2B9Z5/CT
Precautions for Use
1. Over-current-proof
Customer must apply resistors for protection, otherwise slight voltage shift will cause big
current change ( Burn out will happen ).
2. Storage
2.1 Do not open moisture proof bag before the products are ready to use.
2.2 Before opening the package: The LEDs should be kept at 30℃ or less and 90%RH or less.
2.3 After opening the package: The LED's floor life is 1 year under 30℃ or less and 60% RH or
less. If unused LEDs remain, it should be stored in moisture proof packages.
2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the
storage time, baking treatment should be performed using the following conditions.
Baking treatment: 60±5℃ for 24 hours.
3. Soldering Condition
3.1 Pb-free solder temperature profile
1~5 °C / Sec.
260°C. Max.
10 Sec. Max.
1~5 °C / Sec.
Pre-heating
180~200°C
60 Sec. Max.
Above 220°C
120 Sec. Max.
3.2 Reflow soldering should not be done more than two times.
3.3 When soldering, do not put stress on the LEDs during heating.
3.4 After soldering, do not warp the circuit board.
4. Soldering Iron
Each terminal is to go to the tip of soldering iron temperature less than 350℃ for 3 seconds
within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals,
and do soldering of each terminal. Be careful because the damage of the product is often started
at the time of the hand solder.
Everlight Electronics Co., Ltd.
http://www.everlight.com
Rev. 1
Page: 9 of 10
Device No. : DSE-67F-011
prepared date: 25-Apr-2007
Prepared by: Josh Chou
EVERLIGHT ELECTRONICS CO., LTD.
67-31F/RSC-AX2Y2B9Z5/CT
5. Repairing
Repair should not be done after the LEDs have been soldered. When repairing is
unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed
beforehand whether the characteristics of the LEDs will or will not be damaged by repairing.
EVERLIGHT ELECTRONICS CO., LTD.
Office: No 25, Lane 76, Sec 3, Chung Yang Rd,
Tucheng, Taipei 236, Taiwan, R.O.C
Tel: 886-2-2267-2000, 2267-9936
Fax: 886-2267-6244, 2267-6189, 2267-6306
http://www.everlight.com
Everlight Electronics Co., Ltd.
http://www.everlight.com
Rev. 1
Page: 10 of 10
Device No. : DSE-67F-011
prepared date: 25-Apr-2007
Prepared by: Josh Chou