EVERLIGHT 67-21BSDRC-S530-A6-TR8

EVERLIGHTELECTRONICS CO.,LTD.
Technical Data Sheet
Top View LED With Lens(Preliminary)
67-21BSDRC/S530-A6/TR8
Features
․P-LCC-2 package.
․High flux output.
․High current capability.
․White package.
․Optical indicator.
․Colorless clear window.
․Ideal for backlight and light pipe application.
․Inter reflector.
․Suitable for automatic placement equipment.
․Suitable for reflow and wave solder processes.
․Available on tape and reel (12mm Tape).
․Pb-free.
Descriptions
The 67-21B series is available in soft orange,
red and yellow. Due to the package design, the LED
has optimized light coupling by inter reflector.
This feature makes the 67-21B series LED
ideal for light pipe application. The low current
requirement makes this device ideal for portable
equipment or any other application where power is
at a premium.
Applications
․Indicator and backlight for audio and video equipment.
․Indicator and backlight in office and family equipment.
․Flat backlight for LCD’s, switches and symbols.
․Light pipe application.
․General use.
Device Selection Guide
Chip
Emitted Color
Resin Color
Deep Red
Water Clear
Material
AlGaInP
Everlight Electronics Co., Ltd.
http://www.everlight.com
Rev. 1.0
Page: 1 of 9
Device No. :
prepared date:1-Jun-2007
Prepared by: Tracy
EVERLIGHTELECTRONICS CO.,LTD.
Technical Data Sheet
Top View LED With Lens(Preliminary)
67-21BSDRC/S530-A6/TR8
Package Dimensions
3.4±0.2
2.9±0.2
CL
2.2±0.1
CL
-
+
Polarity
3.25±0.2
3.5±0.2
2.7±0.2
2.9±0.2
1.5
1.9
3.2±0.2
For reflow soldering (propose)
2.2±0.1
0.8±0.1
Note: The tolerances unless mentioned is ±0.1mm ;Unit = mm
Everlight Electronics Co., Ltd.
http://www.everlight.com
Rev. 1.0
Page: 2 of 9
Device No. :
prepared date:1-Jun-2007
Prepared by: Tracy
EVERLIGHTELECTRONICS CO.,LTD.
Technical Data Sheet
Top View LED With Lens(Preliminary)
67-21BSDRC/S530-A6/TR8
Absolute Maximum Ratings (Ta=25℃)
Parameter
Symbol
Rating
Unit
Reverse Voltage
VR
5
V
Forward Current
IF
25
mA
Peak Forward Current(Duty 1/10 @ 1KHz)
IFP
60
mA
Power Dissipation
Pd
60
mW
Electrostatic Discharge
ESD
2000
V
Operating Temperature
Topr
-40 ~ +85
℃
Storage Temperature
Tstg
-40~ +90
℃
Soldering Temperature
Tsol
Reflow Soldering : 260 ℃ for 10 sec.
Hand Soldering : 350 ℃ for 3 sec.
Electronic Optical Characteristics (Ta=25℃) :
Parameter
Symbol
Min.
Typ.
Max.
Unit
Condition
Luminous Intensity
Iv
170
240
-----
mcd
IF=20mA
Viewing Angle
2θ1/2
-----
60
-----
deg
IF=20mA
Peak Wavelength
λp
-----
650
-----
nm
IF=20mA
Dominant Wavelength
λd
629.5
-----
645.5
nm
IF=20mA
Spectrum Radiation Bandwidth
△λ
-----
20
-----
nm
IF=20mA
Forward Voltage
VF
-----
2.0
2.4
V
IF=20mA
Reverse Current
IR
-----
-----
10
μA
VR=5V
Notes:
1.Tolerance of Luminous Intensity ±11%
2.Tolerance of Dominant Wavelength ±1nm
3.Tolerance of Forward Voltage ±0.1V
Everlight Electronics Co., Ltd.
http://www.everlight.com
Rev. 1.0
Page: 3 of 9
Device No. :
prepared date:1-Jun-2007
Prepared by: Tracy
EVERLIGHTELECTRONICS CO.,LTD.
Technical Data Sheet
Top View LED With Lens(Preliminary)
67-21BSDRC/S530-A6/TR8
Typical Electro-Optical Characteristics Curves
Everlight Electronics Co., Ltd.
http://www.everlight.com
Rev. 1.0
Page: 4 of 9
Device No. :
prepared date:1-Jun-2007
Prepared by: Tracy
EVERLIGHTELECTRONICS CO.,LTD.
Technical Data Sheet
Top View LED With Lens(Preliminary)
67-21BSDRC/S530-A6/TR8
Label explanation
CAT: Luminous Intensity Rank
HUE: Dom. Wavelength Rank
REF: Forward Voltage Rank
Reel Dimensions
Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm
Everlight Electronics Co., Ltd.
http://www.everlight.com
Rev. 1.0
Page: 5 of 9
Device No. :
prepared date:1-Jun-2007
Prepared by: Tracy
EVERLIGHTELECTRONICS CO.,LTD.
Technical Data Sheet
Top View LED With Lens(Preliminary)
67-21BSDRC/S530-A6/TR8
Carrier Tape Dimensions: Loaded quantity 500 PCS per reel.
+
Polarity
Note: The tolerances unless mentioned is ±0.1mm Unit = mm
Moisture Resistant Packaging
Label
Aluminum moisture-proof bag
Desiccant
Label
Everlight Electronics Co., Ltd.
http://www.everlight.com
Rev. 1.0
Page: 6 of 9
Device No. :
prepared date:1-Jun-2007
Prepared by: Tracy
EVERLIGHTELECTRONICS CO.,LTD.
Technical Data Sheet
Top View LED With Lens(Preliminary)
67-21BSDRC/S530-A6/TR8
Reliability Test Items And Conditions
The reliability of products shall be satisfied with items listed below.
Confidence level:90%
LTPD:10%
No.
Items
Test Condition
1
Reflow Soldering
Temp. : 260℃±5℃
Min. 5sec.
H : +100℃ 15min
∫ 5 min
L : -40℃ 15min
H : +100℃ 5min
∫ 10 sec
L : -10℃ 5min
Test
Sample
Hours/Cycles
Size
Ac/Re
6 Min.
22 PCS.
0/1
300 Cycles
22 PCS.
0/1
300 Cycles
22 PCS.
0/1
2
Temperature Cycle
3
Thermal Shock
4
High Temperature
Storage
Temp. : 100℃
1000 Hrs.
22 PCS.
0/1
5
Low Temperature
Storage
Temp. : -40℃
1000 Hrs.
22 PCS.
0/1
6
DC Operating Life
IF = 20 mA
1000 Hrs.
22 PCS.
0/1
7
High Temperature /
High Humidity
85℃/ 85%RH
1000 Hrs.
22 PCS.
0/1
Everlight Electronics Co., Ltd.
http://www.everlight.com
Rev. 1.0
Page: 7 of 9
Device No. :
prepared date:1-Jun-2007
Prepared by: Tracy
EVERLIGHTELECTRONICS CO.,LTD.
Technical Data Sheet
Top View LED With Lens(Preliminary)
67-21BSDRC/S530-A6/TR8
Precautions For Use
1. Over-current-proof
Customer must apply resistors for protection , otherwise slight voltage shift will cause big
current change ( Burn out will happen ).
2. Storage
2.1 Do not open moisture proof bag before the products are ready to use.
2.2 Before opening the package: The LEDs should be kept at 30℃ or less and 90%RH or less.
2.3 After opening the package: The LED's floor life is 1 year under 30℃ or less and 60% RH or less.
If unused LEDs remain, it should be stored in moisture proof packages.
2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the
storage time, baking treatment should be performed using the following conditions.
Baking treatment : 60±5℃ for 24 hours.
3. Soldering Condition
3.1 Pb-free solder temperature profile
1~5 °C / Sec.
260°C. Max.
10 Sec. Max.
1~5 °C / Sec.
Pre-heating
180~200°C
60 Sec. Max.
Above 220°C
120 Sec. Max.
3.2 Reflow soldering should not be done more than two times.
3.3 When soldering, do not put stress on the LEDs during heating.
3.4 After soldering, do not warp the circuit board.
Everlight Electronics Co., Ltd.
http://www.everlight.com
Rev. 1.0
Page: 8 of 9
Device No. :
prepared date:1-Jun-2007
Prepared by: Tracy
EVERLIGHTELECTRONICS CO.,LTD.
Technical Data Sheet
Top View LED With Lens(Preliminary)
67-21BSDRC/S530-A6/TR8
4.Soldering Iron
Each terminal is to go to the tip of soldering iron temperature less than 350℃ for 3
seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more
intervals, and do soldering of each terminal. Be careful because the damage of the product is often
started at the time of the hand solder.
5.Repairing
Repair should not be done after the LEDs have been soldered. When repairing is
unavoidable, a double-head soldering iron should be used (as below figure). It should be
confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by
repairing.
EVERLIGHT ELECTRONICS CO., LTD.
Office: No 25, Lane 76, Sec 3, Chung Yang Rd,
Tucheng,Test
TaipeiItems
236, Taiwan,
Reliability
AndR.O.C
Conditions
Tel: 886-2-2267-2000, 2267-9936
Fax: 886-2267-6244, 2267-6189, 2267-6306
http://www.everlight.com
Everlight Electronics Co., Ltd.
http://www.everlight.com
Rev. 1.0
Page: 9 of 9
Device No. :
prepared date:1-Jun-2007
Prepared by: Tracy