BCcomponents DATA SHEET 056/057 PSM-SI Aluminum electrolytic capacitors Power Standard Miniature Snap-in Product specification Supersedes data of 18th January 2000 File under BCcomponents, BC01 2001 Dec 10 BCcomponents Product specification Aluminum electrolytic capacitors Power Standard Miniature Snap-in 056/057 PSM-SI FEATURES • Polarized aluminum electrolytic capacitors, non-solid electrolyte • Large types, minimized dimensions, cylindrical aluminum case, insulated with a blue sleeve • Pressure relief on the top of the aluminum case • Charge and discharge proof • Long useful life: 12000 hours at 85 °C 2-Terminal 3-Terminal JW68 • High ripple current capability • Keyed polarity version available. Fig.1 Component outlines. APPLICATIONS • General purpose, industrial and audio/video systems 156/157 PUM-SI • Smoothing and filtering • Standard and switched mode power supplies • Energy storage in pulse systems. smaller dimensions keyed polarity shock resistant 85 °C 166/167 PSM-4TSI 056/057 PSM-SI long life 105 °C 058/059 PLL-SI CCB009 QUICK REFERENCE DATA VALUE DESCRIPTION 056 Case size (∅Dnom × Lnom in mm) 057 22 × 25 to 35 × 50 470 to 68000 µF Rated capacitance range (E6 series), CR Rated voltage range, UR; note 1 10 to 100 V 200 to 450 V −40 to +85 °C Category temperature range Endurance test at 85 °C 5000 hours (450 V: 2000 hours) Useful life at 85 °C 12000 hours (450 V: 5000 hours) Useful life at 40 °C and 1.4 × IR applied 210000 hours (450 V: 90000 hours) Shelf life at 0 V, 85 °C 500 hours Based on sectional specification IEC 60384-4/EN130300 Climatic category IEC 60068 40/085/56 Note 1. A 420 V range is available on request. 2001 Dec 10 47 to 1500 µF ±20% Tolerance on CR 2 BCcomponents Product specification Aluminum electrolytic capacitors Power Standard Miniature Snap-in 056/057 PSM-SI Selection chart for CR, UR and relevant nominal case sizes (∅D × L in mm) for 056 series Preferred types (2-terminals) in bold. CR (µF) UR (V) 10 16 25 40 50 63 100 470 − − − − − − 22 × 25 680 − − − − − − 22 × 30 − − − − − 22 × 25 25 × 30 − − − − − − 22 × 40 − − − − 22 × 25 22 × 30 30 × 30 − − − − − − 25 × 40 − − − 22 × 25 22 × 30 25 × 30 30 × 40 − − − − − 22 × 40 25 × 50 − − 22 × 25 22 × 30 25 × 30 30 × 30 35 × 40 − − − − 22 × 40 25 × 40 30 × 50 − 22 × 25 22 × 30 25 × 30 30 × 30 30 × 40 35 × 50 1000 1500 2200 3300 4700 6800 10000 15000 22000 33000 47000 68000 2001 Dec 10 − − − 22 × 40 25 × 40 25 × 50 − 22 × 25 22 × 30 25 × 30 30 × 30 30 × 40 35 × 40 − − − 22 × 40 25 × 40 25 × 50 30 × 50 − 22 × 30 25 × 30 30 × 30 30 × 40 35 × 40 35 × 50 − − 22 × 40 25 × 40 25 × 50 30 × 50 − − 25 × 30 30 × 30 30 × 40 35 × 40 35 × 50 − − 22 × 40 25 × 40 25 × 50 30 × 50 − − − 30 × 30 30 × 40 35 × 40 35 × 50 − − − − 25 × 40 25 × 50 30 × 50 − − − 30 × 40 35 × 40 35 × 50 − − − − 25 × 50 30 × 50 − − − − − 35 × 40 35 × 50 − − − − − 30 × 50 − − − − − − 35 × 50 − − − − − − 3 BCcomponents Product specification Aluminum electrolytic capacitors Power Standard Miniature Snap-in 056/057 PSM-SI Selection chart for CR, UR and relevant nominal case sizes (∅D × L in mm) for 057 series Preferred types (2-terminals) in bold. CR (µF) UR (V) 200 250 47 − − 68 − − 100 470 680 1000 1500 22 × 30 25 × 30 30 × 30 22 × 35 25 × 35 22 × 40 22 × 35 − − − − − − − − 30 × 30 30 × 30 25 × 50 25 × 40 25 × 50(1) 30 × 35 − 25 × 40 25 × 30 30 × 45(1) 30 × 35 35 × 40 22 × 40 30 × 40 25 × 50 30 × 45 − 30 × 35 25 × 50 − 25 × 30 30 × 30 35 × 35 22 × 40 25 × 40 30 × 30 30 × 40 25 × 40 25 × 50 35 × 45 30 × 40 35 × 40 25 × 50 30 × 50 35 × 40 35 × 50 − − − − − 35 × 40 35 × 50 30 × 45 30 × 50 35 × 45 35 × 50 35 × 50 − − − − − − − − − − − − 30 × 50 − − − − 35 × 50 − − − − Note 1. Ripple current optimized types. 2001 Dec 10 22 × 30 − − 330 22 × 30 − 22 × 30 450 22 × 30 25 × 30 − 22 × 30 220 − 22 × 25 400 22 × 25 − 22 × 25 150 385 22 × 25 4 BCcomponents Product specification Aluminum electrolytic capacitors Power Standard Miniature Snap-in 056/057 PSM-SI MECHANICAL DATA AND PACKAGING QUANTITIES Two terminal snap-in ∅D + TERMINAL L + 2 max. L − TERMINAL 10 ±0.1 Bottom view 4.0 ± 0.5 CCA994 CCA995 ∅2 ±0.1 (2×) Dimensions in mm. For dimensions see Table 1. The minus terminal can be marked with a black dot or with an imprinted ‘−’ sign. (1) From mid. 2000 onwards: 4.0 ±0.5 mm. Dimensions in mm. Fig.3 Mounting hole diagram. Fig.2 Two terminal snap-in. Three terminal snap-in ∅2 ±0.1 (2×) ∅D ∅2.5 ±0.1 + TERMINAL L + 2 max. L 10 ±0.1 3.3 ±0.1 − TERMINAL minus pole marking Bottom view 4 ±0.5 CCC162 Dimensions in mm. For dimensions see Table 1. The negative terminal has TWO pins which are BOTH electrically connected. Fig.4 Three terminal snap-in. 2001 Dec 10 4.75 ±0.1 CCC163 Dimensions in mm. The 10 mm spacing of the 2 pin snap-in is used as the base layout and a third hole is added. The third hole is closer to the negative primary hole so that polarization is always maintained, together with added mechanical stability. Fig.5 Mounting hole diagram. 5 BCcomponents Product specification Aluminum electrolytic capacitors Power Standard Miniature Snap-in Table 1 056/057 PSM-SI Physical dimensions, mass and packaging information; see Figs 2 and 4 NOMINAL CASE SIZE ∅D × L (mm) ∅Dmax (mm) Lmax (mm) MASS (g) PACKAGING QUANTITIES (units per box) CARDBOARD BOX DIMENSIONS l×w×h (mm) 22 × 25 23 27 ≈12 100 260 × 250 × 39 22 × 30 23 32 ≈16 100 260 × 250 × 44 22 × 35 23 37 ≈20 100 260 × 250 × 49 22 × 40 23 42 ≈23 100 260 × 250 × 54 25 × 30 26 32 ≈22 100 290 × 280 × 44 25 × 35 26 37 ≈24 100 290 × 280 × 49 25 × 40 26 42 ≈27 100 290 × 280 × 54 25 × 50 26 52 ≈38 100 290 × 280 × 64 30 × 30 31 32 ≈30 100 340 × 330 × 44 30 × 35 31 37 ≈35 100 340 × 330 × 49 30 × 40 31 42 ≈40 100 340 × 330 × 54 30 × 45 31 47 ≈45 100 340 × 330 × 59 30 × 50 31 52 ≈50 100 340 × 330 × 64 35 × 35 36 37 ≈48 50 390 × 198 × 49 35 × 40 36 42 ≈55 50 390 × 198 × 54 35 × 45 36 47 ≈63 50 390 × 198 × 59 35 × 50 36 52 ≈72 50 390 × 198 × 64 MARKING The capacitors are marked (where possible) with the following information: • Rated capacitance (in µF) • Tolerance code on rated capacitance (M for ±20%) • Rated voltage (in V) • Climatic category in accordance with “IEC 60068” • Date code (year and week) in accordance with “IEC 60062” • Code for factory of origin • Name of manufacturer • ‘−’ sign to indicate the negative terminal, visible from the top and side of the capacitor • Code number (last 8 digits) • Code for basic specification in accordance with “IEC 60384-4-1” and “CECC 30301”. 2001 Dec 10 6 BCcomponents Product specification Aluminum electrolytic capacitors Power Standard Miniature Snap-in 056/057 PSM-SI ELECTRICAL DATA AND ORDERING INFORMATION Ordering example Unless otherwise specified, all electrical values in Tables 2 and 3 apply at Tamb = 20 °C, P = 86 to 106 kPa, RH = 45 to 75%. Electrolytic capacitor 056 series SYMBOL 10000 µF/25 V; ±20% Nominal case size: ∅25 × 40 mm DESCRIPTION CR rated capacitance at 100 Hz 2-TERMINAL SNAP-IN: IR rated RMS ripple current at 100 Hz or ≥10 kHz and 85 °C Catalogue number: 2222 056 46103. IL1 max. leakage current after 1 minute at UR IL5 max. leakage current after 5 minutes at UR 3-TERMINAL SNAP-IN: ESR max. equivalent series resistance at 100 Hz Z max. impedance at 10 kHz Table 2 UR (V) 10 16 Catalogue number: 2222 056 26103. Electrical data and ordering information for 056 series; preferred types in bold CR 100 Hz (µF) NOMINAL CASE SIZE ∅D × L (mm) IR 100 Hz 85 °C (A) IR ≥10 kHz 85 °C (A) IL1 1 min (µA) IL5 5 min (µA) ESR 100 Hz (mΩ) Z 10 kHz (mΩ) CATALOGUE NUMBER 2222 056 ..... 2-TERM. 3-TERM. 6800 22 × 25 2.04 2.40 412 140 76 62 54682 74682 10000 22 × 30 2.56 3.02 608 205 56 45 54103 74103 15000 25 × 30 3.12 3.68 904 304 44 39 54153 74153 15000 22 × 40 3.39 4.00 904 304 41 34 44153 24153 22000 30 × 30 3.47 4.09 1324 444 44 37 54223 74223 22000 25 × 40 4.12 4.86 1324 444 34 28 44223 24223 33000 30 × 40 4.58 5.40 1984 664 32 28 54333 74333 33000 25 × 50 4.70 5.55 1984 664 30 27 44333 24333 47000 35 × 40 5.10 6.02 2824 944 31 26 54473 74473 47000 30 × 50 5.39 6.36 2824 944 28 24 44473 24473 68000 35 × 50 5.88 6.94 4084 1364 28 23 54683 74683 4700 22 × 25 2.01 2.37 455 154 79 62 55472 75472 6800 22 × 30 2.54 3.00 657 222 57 45 55682 75682 10000 25 × 30 3.02 3.56 964 324 47 39 55103 75103 10000 22 × 40 3.28 3.87 964 324 44 34 45103 25103 15000 30 × 30 3.36 3.96 1444 484 47 37 55153 75153 15000 25 × 40 4.00 4.72 1444 484 34 28 45153 25153 22000 30 × 40 4.51 5.32 2116 708 33 28 55223 75223 22000 25 × 50 3.97 4.68 2116 708 42 41 45223 25223 33000 35 × 40 5.02 5.92 3172 1060 32 28 55333 75333 33000 30 × 50 4.75 5.61 3172 1060 36 34 45333 25333 47000 35 × 50 5.34 6.30 4516 1508 34 32 55473 75473 2001 Dec 10 7 BCcomponents Product specification Aluminum electrolytic capacitors Power Standard Miniature Snap-in UR (V) 25 40 50 CR 100 Hz (µF) NOMINAL CASE SIZE ∅D × L (mm) IR 100 Hz 85 °C (A) IR ≥10 kHz 85 °C (A) 3300 22 × 25 1.88 4700 22 × 30 2.37 6800 25 × 30 6800 056/057 PSM-SI IL1 1 min (µA) IL5 5 min (µA) ESR 100 Hz (mΩ) Z 10 kHz (mΩ) 2.22 499 2.80 709 169 89 239 65 2.81 3.32 1024 344 22 × 40 3.16 3.73 1024 10000 30 × 30 10000 25 × 40 3.25 3.84 3.73 4.40 15000 30 × 40 4.73 15000 25 × 50 22000 22000 CATALOGUE NUMBER 2222 056 ..... 2-TERM. 3-TERM. 61 56332 76332 45 56472 76472 54 41 56682 76682 344 47 38 46682 26682 1504 504 50 38 56103 76103 1504 504 39 30 46103 26103 5.58 2254 754 30 28 56153 76153 3.92 4.63 2254 754 43 39 46153 26153 35 × 40 4.48 5.29 3304 1104 40 28 56223 76223 30 × 50 4.96 5.85 3304 1104 36 23 46223 26223 33000 35 × 50 4.98 5.88 4954 1654 39 33 56333 76333 2200 22 × 25 1.85 2.26 532 180 92 61 57222 77222 3300 22 × 30 2.09 2.55 796 260 67 45 57332 77332 4700 25 × 30 2.28 2.78 1132 380 82 70 57472 77472 4700 22 × 40 3.10 3.78 1132 380 49 38 47472 27472 6800 30 × 30 3.16 3.85 1636 548 53 38 57682 77682 27682 6800 25 × 40 3.06 3.73 1636 548 58 50 47682 10000 30 × 40 4.20 5.12 2404 804 38 28 57103 77103 10000 25 × 50 3.88 4.73 2404 804 44 39 47103 27103 15000 35 × 40 4.05 4.94 3604 1204 49 41 57153 77153 15000 30 × 50 4.45 5.43 3604 1204 41 34 47153 27153 22000 35 × 50 4.86 5.93 5284 1764 40 33 57223 77223 1500 22 × 25 1.36 1.66 454 154 170 130 51152 71152 2200 22 × 30 1.75 2.14 664 224 120 91 51222 71222 3300 25 × 30 2.17 2.65 994 334 90 72 51332 71332 3300 22 × 40 2.42 2.95 994 334 80 63 41332 21332 4700 30 × 30 2.65 3.23 1414 474 75 63 51472 71472 4700 25 × 40 2.89 3.53 1414 474 65 52 41472 21472 6800 30 × 40 3.56 4.34 2044 684 53 45 51682 71682 6800 25 × 50 3.75 4.58 2044 684 50 43 41682 21682 10000 35 × 40 4.05 4.94 3004 1004 49 42 51103 71103 10000 30 × 50 4.50 5.49 3004 1004 40 35 41103 21103 15000 35 × 50 4.98 6.08 4504 1504 39 33 51153 71153 2001 Dec 10 8 BCcomponents Product specification Aluminum electrolytic capacitors Power Standard Miniature Snap-in UR (V) 63 100 CR 100 Hz (µF) NOMINAL CASE SIZE ∅D × L (mm) IR 100 Hz 85 °C (A) IR ≥10 kHz 85 °C (A) 1000 22 × 25 1.46 1500 22 × 30 1.87 2200 25 × 30 2200 056/057 PSM-SI IL1 1 min (µA) IL5 5 min (µA) ESR 100 Hz (mΩ) Z 10 kHz (mΩ) 1.78 382 2.28 571 130 148 193 105 2.32 2.83 836 281 22 × 40 2.54 3.10 836 3300 30 × 30 3300 25 × 40 2.87 3.50 3.14 3.83 4700 30 × 40 3.67 4700 25 × 50 6800 6800 CATALOGUE NUMBER 2222 056 ..... 2-TERM. 3-TERM. 104 58102 78102 72 58152 78152 79 59 58222 78222 281 73 53 48222 28222 1251 420 64 50 58332 78332 1251 420 55 44 48332 28332 4.48 1780 596 50 38 58472 78472 3.71 4.53 1780 596 48 38 48472 28472 35 × 40 4.33 5.28 2574 861 43 38 58682 78682 30 × 50 4.75 5.80 2574 861 42 37 48682 28682 10000 35 × 50 5.26 6.42 3784 1264 35 30 58103 78103 470 22 × 25 0.77 0.94 286 98 535 470 59471 79471 79681 680 22 × 30 0.99 1.21 412 160 375 328 59681 1000 25 × 30 1.27 1.55 604 204 265 235 59102 79102 1000 22 × 40 1.35 1.65 604 204 260 225 49102 29102 1500 30 × 30 1.67 2.04 904 304 190 170 59152 79152 1500 25 × 40 1.75 2.14 904 304 180 160 49152 29152 2200 30 × 40 2.27 2.77 1324 444 130 120 59222 79222 2200 25 × 50 2.30 2.80 1324 444 125 110 49222 29222 3300 35 × 40 2.84 3.46 1984 664 100 95 59332 79332 3300 30 × 50 2.97 3.62 1984 664 92 85 49332 29332 4700 35 × 50 3.59 4.38 2824 677 75 70 59472 79472 2001 Dec 10 9 BCcomponents Product specification Aluminum electrolytic capacitors Power Standard Miniature Snap-in Table 3 056/057 PSM-SI Electrical data and ordering information for 057 series; preferred types in bold CATALOGUE NUMBER 2222 057 ..... UR (V) CR 100 Hz (µF) NOMINAL CASE SIZE ∅D × L (mm) IR 100 Hz 85 °C (A) IL1 1 min (µA) 200 150 22 × 25 0.77 184 220 22 × 30 1.00 268 330 25 × 30 1.36 400 136 430 310 52331 72331 330 22 × 40 1.36 400 136 430 310 42331 22331 470 30 × 30 1.80 568 192 310 230 52471 72471 470 25 × 40 1.80 568 192 310 230 42471 22471 680 30 × 40 2.39 820 276 210 180 52681 72681 680 25 × 50 2.39 820 276 210 180 42681 22681 1000 35 × 40 2.85 1204 404 160 135 52102 72102 1000 30 × 50 2.85 1204 404 160 135 42102 22102 250 385 IL5 5 min (µA) ESR 100 Hz (mΩ) Z 10 kHz (mΩ) 2-TERM. 3-TERM. 64 950 620 52151 72151 92 650 435 52221 72221 1500 35 × 50 3.66 1804 604 120 105 52152 72152 100 22 × 25 0.63 154 54 1440 770 53101 73101 73151 150 22 × 30 0.83 229 79 960 520 53151 220 25 × 30 1.10 334 114 660 365 53221 73221 220 22 × 40 1.10 334 114 660 365 43221 23221 330 30 × 30 1.49 499 169 440 265 53331 73331 330 25 × 40 1.49 499 169 440 265 43331 23331 470 30 × 40 1.98 709 239 310 185 53471 73471 470 25 × 50 1.98 709 239 310 185 43471 23471 680 35 × 40 2.60 1024 344 240 145 53681 73681 23681 680 30 × 50 2.60 1024 344 240 145 43681 1000 35 × 50 3.12 1504 504 160 105 53102 73102 47 22 × 25 0.50 112 40 3000 1400 58479 78479 68689 68 22 × 30 0.63 161 56 2100 1000 58689 100 25 × 30 0.86 235 81 1400 780 58101 78101 100 22 × 40 0.86 235 81 1400 780 48101 68101 100 22 × 35 0.84 235 81 1400 780 38101 88101 150 30 × 30 1.16 350 119 950 520 58151 78151 150 25 × 40 1.16 350 119 950 520 48151 68151 220 30 × 45 1.63 512 173 700 460 18221(1) 88221(1) 220 30 × 40 1.57 512 173 650 400 58221 78221 220 30 × 35 1.50 512 173 650 400 38221 90051 220 25 × 50 1.57 512 173 650 400 48221 68221 330 35 × 35 1.73 766 258 480 280 68331 88331 330 30 × 45 1.75 766 258 480 280 38331 78331 470 35 × 50 2.40 1089 366 340 220 58471 78471 470 35 × 45 2.29 1089 366 340 220 48471 28471 2001 Dec 10 10 BCcomponents Product specification Aluminum electrolytic capacitors Power Standard Miniature Snap-in UR (V) NOMINAL CASE SIZE ∅D × L (mm) IR 100 Hz 85 °C (A) IL1 1 min (µA) 47 22 × 25 0.50 117 68 22 × 30 0.63 167 100 25 × 30 0.86 100 22 × 35 150 150 CR 100 Hz (µF) 400 450 IL5 5 min (µA) 056/057 PSM-SI ESR 100 Hz (mΩ) Z 10 kHz (mΩ) 42 3000 58 2100 244 84 0.84 240 84 30 × 30 1.16 364 25 × 50 1.50 364 150 25 × 40 1.16 220 30 × 35 220 330 CATALOGUE NUMBER 2222 057 ..... 2-TERM. 3-TERM. 1400 56479 76479 1000 56689 76689 1400 780 56101 76101 1400 780 36101 66101 124 950 520 56151 90054 124 1000 520 16151(1) 36151(1) 364 124 950 520 46151 86151 1.50 532 180 650 400 36221 90055 25 × 50 1.57 532 180 650 400 46221 86221 35 × 40 1.85 796 268 480 280 56331 76331 330 30 × 50 1.85 796 268 480 280 46331 26331 470 35 × 50 2.40 1132 380 340 220 56471 76471 47 22 × 30 0.26 131 45 5600 4400 67479 87479 68 22 × 30 0.33 188 65 3900 3100 57689 77689 100 30 × 30 0.48 274 94 2600 2100 57101 77101 100 25 × 35 0.46 274 94 2600 2100 37101 17101 150 30 × 35 0.66 409 140 1600 1300 37151 17151 150 25 × 50 0.70 409 140 1600 1300 47151 27151 220 35 × 40 0.92 598 202 1100 900 57221 77221 220 30 × 45 0.73 598 202 1100 900 37221 17221 330 35 × 50 1.26 895 301 700 600 57331 77331 330 35 × 45 1.20 895 301 700 600 47331 27331 Note 1. Ripple current optimized types. Additional electrical data PARAMETER CONDITIONS VALUE Voltage Surge voltage ≤250 V versions Us = 1.15 × UR ≥385 V versions Us = 1.1 × UR Urev ≤ 1 V Reverse voltage Current Leakage current after 1 minute at UR IL1 ≤ 0.006CR × UR + 4 µA after 5 minutes at UR IL5 ≤ 0.002CR × UR + 4 µA Inductance Equivalent series inductance (ESL) all case sizes typ. 19 nH max. 25 nH 2001 Dec 10 11 BCcomponents Product specification Aluminum electrolytic capacitors Power Standard Miniature Snap-in 056/057 PSM-SI Capacitance (C) MRA457 1.2 C C0 1.1 1.0 0.9 1 2 0.8 3 0.7 Curve 1: UR = 100 V. Curve 2: UR = 200 V. Curve 3: UR ≥ 250 V and ≤40 V. C0 = capacitance at 20 °C and 100 Hz. 0.6 100 50 0 50 Tamb ( o C) 100 Fig.6 Typical multiplier of capacitance as a function of ambient temperature. MRA453 1.1 C C0 1.0 3 0.9 2 1 0.8 0.7 Curve 1: UR = 10 V and 16 V. Curve 2: UR = 25 V, 35 V and 40 V. Curve 3: UR ≥ 40 V. C0 = capacitance at 20 °C and 100 Hz. 0.6 10 10 2 10 3 Fig.7 Typical multiplier of capacitance as a function of frequency. 2001 Dec 10 12 f (Hz) 10 4 BCcomponents Product specification Aluminum electrolytic capacitors Power Standard Miniature Snap-in 056/057 PSM-SI Equivalent series resistance (ESR) MRA456 ESR ESR 0 1 10 1 2 3 1 2, 3 1 Curve 1: UR ≥ 250 V. Curve 2: UR = 200 V. Curve 3: UR ≤ 100 V. ESR0 = typical at 20 °C and 100 Hz. 100 50 0 50 100 150 Tamb ( o C) Fig.8 Typical multiplier of ESR as a function of ambient temperature. MRA454 1.5 ESR ESR 0 1 2 1 0.5 Curve 1: UR > 100 V. Curve 2: UR ≤ 100 V. ESR0 = typical at 20 °C and 100 Hz. 0 1 10 10 2 10 Fig.9 Typical multiplier of ESR as a function of frequency. 2001 Dec 10 13 3 f (Hz) 10 4 BCcomponents Product specification Aluminum electrolytic capacitors Power Standard Miniature Snap-in 056/057 PSM-SI Impedance (Z) MRA455 Z Z0 1 10 1 2 3 1 2, 3 1 Curve 1: UR ≥ 250 V. Curve 2: UR = 200 V. Curve 3: UR ≤ 100 V. Z0 = typical impedance at 20 °C and 10 kHz. 100 50 0 50 Tamb ( o C) 100 Fig.10 Typical multiplier of impedance as a function of ambient temperature. MRA458 105 Z (mΩ) 104 1 2 3 4 5 Curve 1: 47 µF. Curve 2: 100 µF. Curve 3: 150 µF. Curve 4: 220 µF. Curve 5: 470 µF. Curve 6: 1000 µF. Curve 7: 1500 µF. Curve 8: 2200 µF. Curve 9: 3300 µF. Curve 10: 4700 µF. Curve 11: 6800 µF. Case ∅D × L = 22 × 25 mm. Tamb = 20 °C. 103 6 7 8 9 10 11 102 101 10 1 10 2 10 3 10 4 10 6 10 7 f (Hz) Fig.11 Typical impedance as a function of frequency. 2001 Dec 10 10 5 14 BCcomponents Product specification Aluminum electrolytic capacitors Power Standard Miniature Snap-in 056/057 PSM-SI MRA459 105 Z (mΩ) 104 1 2 3 4 5 Curve 1: 68 µF. Curve 2: 150 µF. Curve 3: 220 µF. Curve 4: 330 µF. Curve 5: 680 µF. Curve 6: 1500 µF. Curve 7: 2200 µF. Curve 8: 3300 µF. Curve 9: 4700 µF. Curve 10: 6800 µF. Curve 11: 10000 µF. Case ∅D × L = 22 × 30 mm. Tamb = 20 °C. 103 6 7 8 9 10 11 102 101 10 1 10 2 10 3 10 4 10 5 10 6 f (Hz) 10 7 Fig.12 Typical impedance as a function of frequency. MRA460 10 5 Z (mΩ) 1 10 4 2 3 4 5 Curve 1: 100 µF. Curve 2: 220 µF. Curve 3: 330 µF. Curve 4: 470 µF. Curve 5: 1000 µF. Curve 6: 2200 µF. Curve 7: 3300 µF. Curve 8: 4700 µF. Curve 9: 6800 µF. Curve 10: 10000 µF. Curve 11: 15000 µF. Case ∅D × L = 25 × 30 and 22 × 40 mm. Tamb = 20 °C. 10 3 10 2 10 1 10 1 6 7 8 9 10 11 10 2 10 3 10 4 10 6 10 7 f (Hz) Fig.13 Typical impedance as a function of frequency. 2001 Dec 10 10 5 15 BCcomponents Product specification Aluminum electrolytic capacitors Power Standard Miniature Snap-in 056/057 PSM-SI MRA461 10 5 Z (mΩ) 10 4 1 2 3 4 10 3 Curve 1: 150 µF. Curve 2: 330 µF. Curve 3: 470 µF. Curve 4: 680 µF. Curve 5: 1500 µF. Curve 6: 3300 µF. Curve 7: 4700 µF. Curve 8: 6800 µF. Curve 9: 10000 µF. Curve 10: 15000 µF. Curve 11: 22000 µF. Case ∅D × L = 30 × 30 and 25 × 40 mm. Tamb = 20 °C. 10 2 10 1 10 1 5 6 7 8 9 10 11 10 2 10 3 10 4 10 5 10 6 10 7 f (Hz) Fig.14 Typical impedance as a function of frequency. MRA462 10 5 Z (mΩ) 10 4 1 2 3 4 Curve 1: 220 µF. Curve 2: 470 µF. Curve 3: 680 µF. Curve 4: 1000 µF. Curve 5: 2200 µF. Curve 6: 4700 µF. Curve 7: 6800 µF. Curve 8: 10000 µF. Curve 9: 15000 µF. Curve 10: 22000 µF. Curve 11: 33000 µF. Case ∅D × L = 30 × 40 and 25 × 50 mm. Tamb = 20 °C. 10 3 5 10 2 10 1 10 1 6 7 8 9 10 11 10 2 10 3 10 4 10 6 10 7 f (Hz) Fig.15 Typical impedance as a function of frequency. 2001 Dec 10 10 5 16 BCcomponents Product specification Aluminum electrolytic capacitors Power Standard Miniature Snap-in 056/057 PSM-SI MRA463 10 5 Z (mΩ) 10 4 1 Curve 1: 330 µF. Curve 2: 680 µF. Curve 3: 1000 µF. Curve 4: 1500 µF. Curve 5: 3300 µF. Curve 6: 6800 µF. Curve 7: 10000 µF. Curve 8: 15000 µF. Curve 9: 22000 µF. Curve 10: 33000 µF. Curve 11: 47000 µF. Case ∅D × L = 35 × 40 and 30 × 50 mm. Tamb = 20 °C. 10 3 2 3 4 5 10 2 10 1 10 1 6 7 8 9 10 11 10 2 10 3 10 4 10 5 10 6 10 7 f (Hz) Fig.16 Typical impedance as a function of frequency. MRA464 10 5 Z (mΩ) 10 4 1 Curve 1: 470 µF. Curve 2: 1000 µF. Curve 3: 1500 µF. Curve 4: 2200 µF. Curve 5: 4700 µF. Curve 6: 10 000 µF. Curve 7: 15 000 µF. Curve 8: 22000 µF. Curve 9: 33 000 µF. Curve 10: 47000 µF. Curve 11: 68000 µF. Case ∅D × L = 35 × 50 mm. Tamb = 20 °C. 10 3 2 3 4 5 10 2 10 1 10 1 6 7 8 9 10 11 10 2 10 3 10 4 10 6 10 7 f Fig.17 Typical impedance as a function of frequency. 2001 Dec 10 10 5 17 (Hz) BCcomponents Product specification Aluminum electrolytic capacitors Power Standard Miniature Snap-in 056/057 PSM-SI RIPPLE CURRENT AND USEFUL LIFE Table 4 Multiplier of ripple current (IR) as a function of frequency FREQUENCY (Hz) IR MULTIPLIER UR = 10 to 25 V UR = 40 to 100 V UR > 100 V 50 0.93 0.91 0.86 100 1.00 1.00 1.00 200 1.04 1.05 1.13 400 1.07 1.09 1.21 1000 1.11 1.13 1.29 2000 1.13 1.15 1.32 4000 1.15 1.18 1.35 ≥10000 1.18 1.22 1.40 2001 Dec 10 18 BCcomponents Product specification Aluminum electrolytic capacitors Power Standard Miniature Snap-in 056/057 PSM-SI MGA453 2.4 2.3 IA IR 2.2 2.1 2.0 1.9 1.8 1.7 1 life multiplier 2 1. 1.6 5 1. 2 1.5 5 2. 3 1.4 4 5 1.3 8 10 1.2 15 1.1 20 60 0.5 0.0 40 45 0.8 (1) 30 1.0 50 60 70 80 T ( oC) amb 90 IA = actual ripple current at 100 Hz and 85 °C. IR = rated ripple current at 100 Hz and 85 °C. (1) Useful life at 85 °C and IR applied: 12000 hours (450 V types: 5000 hours). Fig.18 Multiplier of useful life as a function of ambient temperature and ripple current load. SPECIFIC TESTS AND REQUIREMENTS General tests and requirements are specified in this handbook, section “Tests and Requirements”. 2001 Dec 10 19 BCcomponents Product specification Aluminum electrolytic capacitors Power Standard Miniature Snap-in Table 5 056/057 PSM-SI Test procedures and requirements TEST NAME OF TEST Endurance REFERENCE IEC 60384-4/ EN130300 subclause 4.13 PROCEDURE (quick reference) Tamb = 85 °C; UR applied; 5000 hours (450 V types: 2000 hours) REQUIREMENTS UR ≤ 100 V; ∆C/C: ±15% UR > 100 V; ∆C/C: ±10% ESR ≤ 1.3 × spec. limit Z ≤ 2 × spec. limit IL5 ≤ spec. limit Useful life CECC 30301 subclause 1.8.1 Tamb = 85 °C; UR and IR applied; 12000 hours (450 V types: 5000 hours) UR ≤ 100 V; ∆C/C: ±45% UR > 100 V; ∆C/C: ±30% ESR ≤ 3 × spec. limit Z ≤ 3 × spec. limit IL5 ≤ spec. limit no short or open circuit, no visible damage total failure percentage: UR ≤ 100 V: ≤1%; UR > 100 V: ≤3% Shelf life (storage at high temperature) 2001 Dec 10 IEC 60384-4/ EN130300 subclause 4.17 Tamb = 85 °C; no voltage applied; 500 hours ∆C/C: ±10% after test: UR to be applied for 30 minutes, 24 to 48 hours before measurement IL5 ≤ 2 × spec. limit 20 ESR ≤ 1.2 × spec. limit