3.4mm RIGHT ANGLE LED INDICATOR WP138A8QMP/ID/TG HIGH EFFICIENCY RED Description Features PRE-TRIMMED LEADS FOR PC MOUNTING. The High Efficiency Red source color devices are CAN BE ASSEMBLED WITH EACH OTHER. made with Gallium Arsenide Phosphide on Gallium Phosphide Orange Light Emitting Diode. I.C.COMPATIBLE. BLACK CASE ENHANCES CONTRAST RATIO. WIDE VIEWING ANGLE. HIGH RELIABILITY LIFE MEASURED IN YEARS. HOUSING MATERIAL:PPA. PACKAGE:1000PCS / REEL. HIGH TEMPERATURE RESISTANT HOUSING. HIGH GLASS TRANSITION TEMPERATURE EPOXY. IN ACCORD WITH Kingbright ENVIRONMENTAL POLICY (DOCUMENT WI-QC-G-0442). RoHS COMPLIANT. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3. Specifications are subject to change without notice. SPEC NO: DSAF7924 REV NO: V.1 DATE: SEP/26/2005 PAGE: 1 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: W.J.ZHU ERP:1102000493 Selection Guide Part No. Dice WP138A8QMP/ID/TG Iv (mcd) @ 10 mA Lens Type HIGH EFFICIENCY RED (GaAsP/GaP) Viewing Angle Min. Typ. 2θ θ1/2 12 20 60° RED DIFFUSED Note: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device Typ. λpeak Peak Wavelength High Efficiency Red λD Dominant Wavelength ∆λ1/2 Max. Units Test Conditions 627 nm IF=20mA High Efficiency Red 625 nm IF=20mA Spectral Line Half-width High Efficiency Red 45 nm IF=20mA C Capacitance High Efficiency Red 15 pF VF=0V;f=1MHz VF Forward Voltage High Efficiency Red 2.0 2.5 V IF=20mA IR Reverse Current High Efficiency Red 10 uA VR = 5V Absolute Maximum Ratings at TA=25°C Parameter High Efficiency Red Units 105 mW DC Forward Current 30 mA Peak Forward Current [1] 160 mA 5 V Power dissipation Reverse Voltage Operating / Storage Temperature -40°C To +85°C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAF7924 REV NO: V.1 DATE: SEP/26/2005 PAGE: 2 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: W.J.ZHU ERP:1102000493 High Efficiency Red WP138A8QMP/ID/TG SPEC NO: DSAF7924 REV NO: V.1 DATE: SEP/26/2005 PAGE: 3 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: W.J.ZHU ERP:1102000493 WP138A8QMP/ID/TG Recommended Soldering Pattern (Units : mm) Tape Specifications (Units : mm) SPEC NO: DSAF7924 REV NO: V.1 DATE: SEP/26/2005 PAGE: 4 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: W.J.ZHU ERP:1102000493 PACKING & LABEL SPECIFICATIONS WP138A8QMP/ID/TG Remarks: If special sorting is required (e.g. binning based on forward voltage, Luminous intensity/ luminous flux, or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous intensity/ Luminous Flux: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. SPEC NO: DSAF7924 REV NO: V.1 DATE: SEP/26/2005 PAGE: 5 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: W.J.ZHU ERP:1102000493