T-1 (3mm) RIGHT ANGLE LED INDICATOR Part Number: WP93A8EWP/GDTG0L GREEN Features Description z I.C. The Green source color devices are made with Gallium COMPATIBLE. z BLACK CASE ENHANCES CONTRAST RATIO. z WIDE VIEWING ANGLE. z HIGH RELIABILITY LIFE MEASURED IN YEARS. z HOUSING MATERIAL: PPA z PACKAGE : 500PCS / REEL. z HIGH TEMPERATURE RESISTANT HOUSING. z HIGH GLASS TRANSITION TEMPERATURE EPOXY. z RoHS COMPLIANT. Phosphide Green Light Emitting Diode. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3. Specifications are subject to change without notice. SPEC NO: DSAF1850 REV NO: V.4 DATE: MAR/27/2007 PAGE: 1 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: S.J.LIU ERP:1102004087 Selection Guide Dice Part No. WP93A8EWP/GDTG0L Iv (mcd) [2] @ 10mA Lens Type GREEN (GaP) Viewing Angle [1] Min. Typ. 2 θ 1/2 8 20 60° GREEN DIFFUSED Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2. Luminous intensity / luminous flux: +/-15%. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device λpeak Peak Wavelength Green λD [1] Dominant Wavelength Δλ1/2 Typ. Max. Units Test Conditions 565 nm IF=20mA Green 568 nm IF=20mA Spectral Line Half-width Green 30 nm IF=20mA C Capacitance Green 15 pF VF=0V;f=1MHz VF [2] Forward Voltage Green 2.2 2.5 V IF=20mA IR Reverse Current Green 10 uA VR = 5V Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25°C Parameter Green Units 62.5 mW DC Forward Current 25 mA Peak Forward Current [1] 140 mA 5 V Power dissipation Reverse Voltage Operating / Storage Temperature -40°C To +85°C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAF1850 REV NO: V.4 DATE: MAR/27/2007 PAGE: 2 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: S.J.LIU ERP:1102004087 Green WP93A8EWP/GDTG0L SPEC NO: DSAF1850 REV NO: V.4 DATE: MAR/27/2007 PAGE: 3 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: S.J.LIU ERP:1102004087 WP93A8EWP/GDTG0L Recommended Soldering Pattern (Units : mm; Tolerance: ± 0.1) Tape Specifications (Units : mm) SPEC NO: DSAF1850 REV NO: V.4 DATE: MAR/27/2007 PAGE: 4 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: S.J.LIU ERP:1102004087 PACKING & LABEL SPECIFICATIONS WP93A8EWP/GDTG0L SPEC NO: DSAF1850 REV NO: V.4 DATE: MAR/27/2007 PAGE: 5 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: S.J.LIU ERP:1102004087