3.4mm RIGHT ANGLE LED INDICATOR WP138A8QMP/YD/TG Features YELLOW Description PRE-TRIMMED LEADS FOR PC MOUNTING. The Yellow source color devices are m ade CAN BE ASSEMBLED WITH EACH OTHER. with Gallium Arsenide Phosphide on Gallium Phosphide Yellow Light Emitting Diode. I.C.COMPATIBLE. BLACK CASE ENHANCES CONTRAST RATIO. WIDE VIEWING ANGLE. HIGH RELIABILITY LIFE MEASURED IN YEARS. HOUSING MATERIAL:PPA. PACKAGE:1000PCS / REEL. HIGH TEMPERATURE RESISTANT HOUSING. HIGH GLASS TRANSFER TEMPERATURE EPOXY. IN ACCORD WITH Kingbright ENVIRONMENTAL POLICY (DOCUMENT WI-QC-G-0442). RoHS COMPLIANT Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3. Specifications are subject to change without notice. SPEC NO: DSAF8371 REV NO: V.1 DATE: OCT/17/2005 PAGE: 1 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Y.L.LI ERP:1102000504 Selection Guide Part No. Dice WP138A8QMP/YD/TG Iv (mcd) @ 10mA Lens Type YELLOW (GaAsP/GaP) YELLOW DIFFUSED Viewing Angle Min. Typ. 2 θ 1/2 8 15 60° Note: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device λpeak Peak Wavelength Yellow λD Dominant Wavelength ∆λ1/2 Typ. Max. Units Test Conditions 590 nm IF=20mA Yellow 588 nm IF=20mA Spectral Line Half-width Yellow 35 nm IF=20mA C Capacitance Yellow 20 pF VF=0V;f=1MHz VF Forward Voltage Yellow 2.1 2.5 V IF=20mA IR Reverse Current Yellow 10 uA VR= 5V Absolute Maximum Ratings at TA=25°C Parameter Yellow Units Power dissipation 75 mW DC Forward Current 30 mA Peak Forward Current [1] 140 mA Reverse Voltage 5 V Operating / Storage Temperature -40°C To +85°C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAF8371 REV NO: V.1 DATE: OCT/17/2005 PAGE: 2 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Y.L.LI ERP:1102000504 Yellow WP138A8QMP/YD/TG SPEC NO: DSAF8371 REV NO: V.1 DATE: OCT/17/2005 PAGE: 3 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Y.L.LI ERP:1102000504 WP138A8QMP/YD/TG Recommended Soldering Pattern (Units : mm) Tape Specifications (Units : mm) SPEC NO: DSAF8371 REV NO: V.1 DATE: OCT/17/2005 PAGE: 4 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Y.L.LI ERP:1102000504 PACKING & LABEL SPECIFICATIONS WP138A8QMP/YD/TG Remarks: If special sorting is required (e.g. binning based on forward voltage, Luminous intensity/ luminous flux, or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous intensity/ Luminous Flux: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. SPEC NO: DSAF8371 REV NO: V.1 DATE: OCT/17/2005 PAGE: 5 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Y.L.LI ERP:1102000504