A-POWER AP9578GI-HF

AP9578GI-HF
Halogen-Free Product
Advanced Power
Electronics Corp.
P-CHANNEL ENHANCEMENT MODE
POWER MOSFET
▼ Lower Gate Charge
D
▼ Simple Drive Requirement
▼ Fast Switching Characteristic
▼ Halogen Free & RoHS Compliant
BVDSS
-60V
RDS(ON)
160mΩ
ID
G
-9A
S
Description
AP9578 series are from Advanced Power innovated design and
silicon process technology to achieve the lowest possible onresistance and fast switching performance. It provides the designer
with an extreme efficient device for use in a wide range of power
applications.
The TO-220CFM package is widely preferred for all commercialindustrial through hole applications. The mold compound provides
a high isolation voltage capability and low thermal resistance
between the tab and the external heat-sink.
G
D
TO-220CFM(I)
S
Absolute Maximum Ratings
Parameter
Symbol
Rating
Units
VDS
Drain-Source Voltage
-60
V
VGS
Gate-Source Voltage
+25
V
[email protected]=25℃
Continuous Drain Current, VGS @ 10V
-9
A
[email protected]=100℃
Continuous Drain Current, VGS @ 10V
-5.7
A
1
IDM
Pulsed Drain Current
-36
A
[email protected]=25℃
Total Power Dissipation
25
W
[email protected]=25℃
Total Power Dissipation
1.92
W
TSTG
Storage Temperature Range
-55 to 150
℃
TJ
Operating Junction Temperature Range
-55 to 150
℃
Thermal Data
Symbol
Parameter
Value
Units
Rthj-c
Maximum Thermal Resistance, Junction-case
5
℃/W
Rthj-a
Maximum Thermal Resistance, Junction-ambient
65
℃/W
Data and specifications subject to change without notice
1
201212031
AP9578GI-HF
Electrical [email protected]=25oC(unless otherwise specified)
Symbol
Parameter
Test Conditions
Min.
Typ.
Max. Units
-60
-
-
V
BVDSS
Drain-Source Breakdown Voltage
VGS=0V, ID=-250uA
RDS(ON)
Static Drain-Source On-Resistance2
VGS=-10V, ID=-5A
-
-
160
mΩ
VGS=-4.5V, ID=-3A
-
-
200
mΩ
VGS(th)
Gate Threshold Voltage
VDS=VGS, ID=-250uA
-1
-
-3
V
gfs
Forward Transconductance
VDS=-10V, ID=-5A
-
8
-
S
IDSS
Drain-Source Leakage Current
VDS=-48V, VGS=0V
-
-
-25
uA
IGSS
Gate-Source Leakage
VGS=+25V, VDS=0V
-
-
+100
nA
Qg
Total Gate Charge
ID=-5A
-
9
16
nC
Qgs
Gate-Source Charge
VDS=-48V
-
2
-
nC
Qgd
Gate-Drain ("Miller") Charge
VGS=-4.5V
-
5
-
nC
td(on)
Turn-on Delay Time
VDS=-30V
-
9
-
ns
tr
Rise Time
ID=-5A
-
12
-
ns
td(off)
Turn-off Delay Time
RG=3.3Ω
-
32
-
ns
tf
Fall Time
VGS=-10V
-
27
-
ns
Ciss
Input Capacitance
VGS=0V
-
760
1220
pF
Coss
Output Capacitance
VDS=-25V
-
80
-
pF
Crss
Reverse Transfer Capacitance
f=1.0MHz
-
60
-
pF
Rg
Gate Resistance
f=1.0MHz
-
10
20
Ω
Min.
Typ.
Source-Drain Diode
Symbol
Parameter
2
Test Conditions
Max. Units
VSD
Forward On Voltage
IS=-5A, VGS=0V
-
-
-1.3
V
trr
Reverse Recovery Time
IS=-5A, VGS=0V,
-
41
-
ns
Qrr
Reverse Recovery Charge
dI/dt=-100A/µs
-
83
-
nC
Notes:
1.Pulse width limited by Max. junction temperature.
2.Pulse test
THIS PRODUCT IS SENSITIVE TO ELECTROSTATIC DISCHARGE, PLEASE HANDLE WITH CAUTION.
USE OF THIS PRODUCT AS A CRITICAL COMPONENT IN LIFE SUPPORT OR OTHER SIMILAR SYSTEMS IS NOT AUTHORIZED.
APEC DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED
HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS.
APEC RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN.
2
AP9578GI-HF
24
30
-10V
- 7 .0V
T C = 25 o C
-10V
-7.0V
T C =150 o C
-ID , Drain Current (A)
-ID , Drain Current (A)
20
- 5 .0V
20
- 4.5 V
10
-5.0V
-4.5V
16
12
V G = -3.0V
8
V G = - 3.0V
4
0
0
0
4
8
12
16
0
8
12
16
-V DS , Drain-to-Source Voltage (V)
Fig 1. Typical Output Characteristics
Fig 2. Typical Output Characteristics
175
2.4
I D = -3 A
ID= -5A
V G = -10V
T C =25 o C
165
2.0
Normalized RDS(ON)
RDS(ON) (mΩ )
4
-V DS , Drain-to-Source Voltage (V)
155
145
1.6
1.2
0.8
135
0.4
125
2
4
6
8
-50
10
0
50
100
-V GS , Gate-to-Source Voltage (V)
T j , Junction Temperature ( o C)
Fig 3. On-Resistance v.s. Gate Voltage
Fig 4. Normalized On-Resistance
v.s. Junction Temperature
150
1.6
10
1.4
Normalized -VGS(th)
-IS(A)
8
6
T j =150 o C
T j =25 o C
4
1.2
1.0
0.8
2
0.6
0.4
0
0
0.2
0.4
0.6
0.8
1
1.2
-V SD , Source-to-Drain Voltage (V)
Fig 5. Forward Characteristic of
Reverse Diode
1.4
-50
0
50
100
150
T j , Junction Temperature ( o C)
Fig 6. Gate Threshold Voltage v.s.
Junction Temperature
3
AP9578GI-HF
f=1.0MHz
10
1000
-VGS , Gate to Source Voltage (V)
V DS = - 48 V
ID= -5A
8
800
C (pF)
C iss
6
600
4
400
2
200
C oss
C rss
0
0
0
4
8
12
16
1
20
5
9
13
17
21
25
29
-V DS , Drain-to-Source Voltage (V)
Q G , Total Gate Charge (nC)
Fig 7. Gate Charge Characteristics
Fig 8. Typical Capacitance Characteristics
100
Operation in this
area limited by
RDS(ON)
100us
-ID (A)
10
1ms
10ms
100ms
1s
DC
1
T C =25 o C
Single Pulse
0
Normalized Thermal Response (Rthjc)
1
Duty factor=0.5
0.2
0.1
0.1
0.05
PDM
t
0.02
T
0.01
Duty factor = t/T
Peak Tj = PDM x Rthjc + T C
Single Pulse
0.01
1
10
100
0.00001
0.0001
-V DS , Drain-to-Source Voltage (V)
Fig 9. Maximum Safe Operating Area
VDS
0.001
0.01
0.1
1
10
t , Pulse Width (s)
Fig 10. Effective Transient Thermal Impedance
VG
90%
QG
-4.5V
QGS
QGD
10%
VGS
td(on) tr
td(off) tf
Fig 11. Switching Time Waveform
Charge
Q
Fig 12. Gate Charge Waveform
4