AVAGO HSMY-C280

HSMx-C280
Miniature ChipLED
Data Sheet
Description
Features
The HSMx-C280 ChipLEDs are designed to 0402 (1.0 x 0.5
mm) industry standard footprint. They are extremely small
in size and the low 0.4 mm height makes them very suitable for application in small portable hand held devices
where real estate is a premium.








Six different colors are available: green, red, yellow,
amber, and deep red. All parts are color and intensity binned except red color. They come in 8 mm paper
tape on a 7 inch diameter reel with 4000 units per
reel which makes them compatible for automatic
placement.
Device Selection Guide
AS AlInGaP
Product Number
Color
Package Description
HSMA-C280
Amber
Untinted, Diffused
HSMC-C280
Red
Untinted, Diffused
HSMT-C280
Deep Red
Untinted, Diffused
Product Number
Color
Package Description
HSMG-C280
Green
Untinted, Diffused
HSMS-C280
HER
Untinted, Diffused
HSMY-C280
Yellow
Untinted, Diffused
Extremely small size (1.0 x 0.5 x 0.4 mm)
0402 industry standard footprint
Diffused optics
Operating temperature range of –40°C to +85°C
Compatible with IR soldering
Available in 6 colors
Available in 8 mm paper tape on 7" diameter reel
Reel sealed in zip locked moisture barrier bags
Applications





LCD backlighting
Push button backlighting
Front panel indicator
Symbol backlighting
Keypad backlighting
GaP
CAUTION: HSMx-C280 LEDs are Class 1A ESD sensitive per JESD22-A114C.01. Please observe appropriate
precautions during handling and processing. Refer to Application Note AN-1142 for additional details.
Package Dimensions
LED DIE
CATHODE
MARK
0.5 (0.02)
1.0 (0.04)
0.25 (0.01)
POLARITY
DIFFUSED
EPOXY
0.4 (0.016)
PC BOARD
0.16 (0.006)
CATHODE
LINE
0.30 (0.012)
0.30 (0.012)
0.4 (0.016) MIN.
SOLDERING
TERMINAL
NOTES:
1. ALL DIMENSIONS IN MILLIMETERS (INCHES).
2. TOLERANCE IS ± 0.1 mm (± 0.004 IN.) UNLESS OTHERWISE SPECIFIED.
2
Absolute Maximum Ratings at TA = 25˚C
Parameter
HSMA/C/T-C280
HSMG/S/Y-C280
Units
DC Forward Current [1]
25
20
mA
Power Dissipation
60
52
mW
Reverse Voltage (IR = 100 μA)
5
5
V
LED Junction Temperature
95
95
˚C
Operating Temperature Range
–40 to +85
–40 to +85
˚C
Storage Temperature Range
–40 to +85
–40 to +85
˚C
Soldering Temperature
See IR soldering profile (Figure 6 & 7)
Notes:
1. Derate linearly as shown in Figure 4.
Electrical Characteristics at TA = 25˚C
Part Number
Forward Voltage
VF (Volts)
@ IF = 20 mA
Typ.
Max.
Reverse Breakdown
VR (Volts)
@ IR = 100 μA
Min.
Capacitance C
(pF), VF = 0,
f = 1 MHz
Typ.
Thermal
Resistance
RJ–PIN (˚C/W)
Typ.
HSMA-C280
1.9
2.4
5
11
300
HSMC-C280
1.9
2.4
5
15
300
HSMT-C280
1.9
2.4
5
45
300
HSMG-C280
2.2
2.6
5
9
250
HSMS-C280
2.1
2.6
5
5
250
HSMY-C280
2.1
2.6
5
6
250
Optical Characteristics at TA = 25˚C
Part Number
Color
Luminous
Intensity
IV (mcd)
@ 20 mA[1]
Min.
Typ.
Peak
Wavelength
peak (nm)
Typ.
Color,
Dominant
Wavelength
d[2] (nm)
Typ.
Viewing
Angle
2 1/2
Degrees[3]
Typ.
Luminous
Efficacy
V
(lm/w)
Typ.
HSMA-C280
AS Amber
28.5
90
595
592
130
480
HSMC-C280
AS Red
28.5
90
637
626
130
155
HSMT-C280
AS Deep Red
11.2
30
660
639
130
70
HSMG-C280
GaP Green
4.5
15
570
572
130
595
HSMS-C280
HER
2.8
10
630
626
130
145
HSMY-C280
GaP Yellow
2.8
8
589
586
130
500
Notes:
1. The luminous intensity, IV, is measured at the peak of the spatial radiation pattern which may not be aligned with the mechanical axis of the
lamp package.
2. The dominant wavelength, d, is derived from the CIE Chromatically Diagram and represents the perceived color of the device.
3.  1/2 is the off-axis angle where the luminous intensity is 1/2 the peak intensity.
3
Color Bin Limits[1]
Light Intensity (Iv) Bin Limits[1]
Intensity (mcd)
Green Color Bins [1]
Dom. Wavelength (nm)
Min.
Max.
Bin ID
Min.
Max.
A
0.11
0.18
A
561.5
564.5
B
0.18
0.29
B
564.5
567.5
C
0.29
0.45
C
567.5
570.5
D
0.45
0.72
D
570.5
573.5
E
0.72
1.10
E
573.5
576.5
F
1.10
1.80
G
1.80
2.80
H
2.80
4.50
J
4.50
7.20
K
7.20
11.20
Bin ID
Dom. Wavelength (nm)
Min.
Max.
L
11.20
18.00
A
582.0
584.5
M
18.00
28.50
B
584.5
587.0
N
28.50
45.00
C
587.0
589.5
P
45.00
71.50
D
589.5
592.0
Q
71.50
112.50
E
592.0
594.5
R
112.50
180.00
F
594.5
597.0
S
180.00
285.00
T
285.00
450.00
U
450.00
715.00
V
715.00
1125.00
W
1125.00
1800.00
X
1800.00
2850.00
Y
2850.00
4500.00
Bin ID
Tolerance: ± 1 nm.
Yellow/Amber Color Bins [1]
Tolerance: ± 1 nm.
Note:
1. Bin categories are established for classification of products.
Products may not be available in all categories. Please contact
your Avago representative for information on currently available
bins.
Tolerance: ± 15%
Note:
1. Bin categories are established for classification of products.
Products may not be available in all categories. Please contact
your Avago representative for information on currently available
bins.
4
1.0
AS
RED
AS
AMBER
90
80
AS
DEEP
RED
70
AS
ORANGE
60
50
40
30
GaP GREEN
0.8
RELATIVE INTENSITY
RELATIVE INTENSITY
- %
100
20
HER
GaP YELLOW
0.6
0.4
0.2
10
550
600
650
WAVELENGTH
0
700
Figure 1a. Relative intensity vs. wavelength.
550
575
10
HER
LPE GREEN
GaP YELLOW
1
600
1.4
1.2
1.2
1.0
0.8
0.6
GaP
0.4
0
1.5 1.6 1.7 1.8 1.9 2.0 2.1 2.2 2.3
725
700
1.0
0.8
AS AMBER
0.6
AS RED
and DEEP RED
0.4
0.2
0
0
5
10
15
20
25
30
0
5
10
15
Figure 3. Luminous intensity vs. forward current.
30
100
25
90
20
GaP
15
10
5
RqJ-A = 600°C/W
0
RELATIVE INTENSITY – %
AS AlInGaP
80
70
60
50
40
30
20
10
0 10 20 30 40 50 60 70 80 90 100
TA – AMBIENT TEMPERATURE – °C
0
-90 -80 -70 -60 -50 -40 -30 -20 -10
0
10 20 30 40 50 60 70 80 90
ANGLE
Figure 4. Maximum forward current vs.
ambient temperature.
Figure 5. Relative intensity vs. angle.
20
25
IF – FORWARD CURRENT – mA
IF – FORWARD CURRENT – mA
VF – FORWARD VOLTAGE – V
5
675
1.4
0.2
Figure 2. Forward current vs. forward voltage.
650
625
Figure 1b. Relative intensity vs. wavelength.
LUMINOUS INTENSITY
(NORMALIZED AT 20 mA)
AS AlInGaP
0
IF MAX. – MAXIMUM FORWARD CURRENT – mA
525
WAVELENGTH – nm
100
IF – FORWARD CURRENT – mA
500
- nm
LUMINOUS INTENSITY
(NORMALIZED AT 20 mA)
0
500
30
10 - 30 SEC.
TEMPERATURE
TEMPERATURE
10 SEC. MAX.
230°C MAX.
4°C/SEC. MAX.
140-160°C
–3°C/SEC. M
4°C/SEC.
MAX.
217 °C
200 °C
255 - 260 °C
3 °C/SEC. MAX.
6 ° C/SEC. MAX.
150 °C
3 ° C/SEC. MAX.
100 SEC. MAX.
60 - 120 SEC.
OVER 2 MIN.
TIME
TIME
Figure 6. Recommended reflow soldering profile.
(Acc. to J-STD-020C)
Figure 7. Recommended Pb-free reflow soldering profile.
USER FEED DIRECTION
0.5 (0.02)
CATHODE SIDE
0.5
(0.02)
0.5
(0.02)
0.5
(0.02)
PRINTED LABEL
Figure 8. Recommended soldering pattern for HSMx-C280.
Figure 9. Reeling orientation.
8.0 ± 1.0 (0.315 ± 0.039)
10.50 ± 1.0 (0.413 ± 0.039)
Ø 13.1 ± 0.5
(Ø 0.516 ± 0.020)
Ø 20.20 MIN.
(Ø 0.795 MIN.)
3.0 ± 0.5
(0.118 ± 0.020)
59.60 ± 1.00
(2.346 ± 0.039)
178.40 ± 1.00
(7.024 ± 0.039)
4.0 ± 0.5
(0.157 ± 0.020)
6
PS
5.0 ± 0.5
(0.197 ± 0.020)
NOTE:
1. ALL DIMENSIONS IN MILLIMETERS (INCHES).
Figure 10. Reel dimensions.
6
DIM. C
(SEE TABLE 1)
4.00 (0.157)
CATHODE
1.50 (0.059)
0.23 ± 0.05
(0.009 ± 0.002)
1.75 (0.069)
3.50 ± 0.05
(0.138 ± 0.002)
DIM. A
(SEE TABLE 1)
8.00 ± 0.30
(0.315 ± 0.012)
DIM. B
(SEE TABLE 1)
4.00 (0.157)
COVER TAPE
USER FEED
DIRECTION
2.00 ± 0.05
(0.079 ± 0.002)
TABLE 1
DIMENSIONS IN MILLIMETERS (INCHES)
DIM. A
DIM. B
DIM. C
± 0.10 (± 0.004) ± 0.10 (± 0.004) ± 0.10 (± 0.004)
PART NUMBER
HSMx-C280 SERIES
1.10 (0.043)
Figure 11. Tape dimensions.
END
THERE SHALL BE A
MINIMUM OF 160 mm
(6.3 INCH) OF EMPTY
COMPONENT PUNCHED
PAPER TAPE SEALED
WITH COVER TAPE.
START
MOUNTED WITH
COMPONENTS
THERE SHALL BE A
MINIMUM OF 160 mm
(6.3 INCH) OF EMPTY
PUNCHED PAPER TAPE
SEALED WITH COVER
TAPE.
NOTES:
1. ALL DIMENSIONS IN MILLIMETERS (INCHES).
2. TOLERANCE IS ± 0.1 mm (± 0.004 IN.) UNLESS OTHERWISE SPECIFIED.
Figure 12. Tape leader and trailer dimensions.
7
CARRIER TAPE
MINIMUM OF
230 mm
(9.05 INCH)
MAY CONSIST
OF PAPER TAPE
AND/OR
COVER TAPE.
0.60 (0.024)
0.66 (0.026)
Reflow Soldering:
For more information on reflow soldering, refer to Application Note AN-1060, Surface Mounting SMT LED Indicator
Components.
Storage Condition: 5 to 30°C @ 60%RH max.
Baking is required before mounting, if:
1. Humidity Indicator Card is > 10% when read at 23 ± 5°C.
2. Device expose to factory conditions <30°C/60%RH more than 672 hours.
Recommended baking condition: 60±5°C for 20 hours.
For product information and a complete list of distributors, please go to our website:
www.avagotech.com
Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies in the United States and other countries.
Data subject to change. Copyright © 2005-2012 Avago Technologies. All rights reserved. Obsoletes 5989-0393EN
AV02-0602EN - February 3, 2012