Technical Data Sheet - Preliminary Full Color Top View LEDs 67-03/BHGHR6W-B11/2T/MS Features ․P-LCC-4 package. ․White package and black surface. ․Optical indicator. ․Ideal for backlight and light pipe application. ․Inter reflector. ․Wide viewing angle. ․Suitable for vapor-phase reflow, Infrared reflow and wave solder processes. ․Available on tape and reel (8mm Tape). ․Pb-free. ․The product itself will remain with RoHS compliant version Descriptions ․The 67-03 series is available in soft orange, green, blue and yellow. Due to the package design, the LED has wide viewing angle and optimized light coupling by inter reflector. This feature makes the LED ideal for light pipe application. The low current requirement makes this device ideal for portable equipment or any other application where power is at a premium. Applications ․Telecommunication: indicator and backlighting in telephone and fax. ․Flat backlight for LCD’s, switches and symbols. ․Light pipe application. ․General use. Device Selection Guide Chip Emitted Color Revision Type R6 Material AlGaInP Brilliant Red GH InGaN Brilliant Green BH InGaN Blue Everlight Electronics Co., Ltd. http://www.everlight.com Device No. DSE-0000547 Prepared date: 15-Dec-2008 :1 LifecyclePhase: Resin Color White Diffuse Rev. 1 Page: 1 of 14 Prepared by: Josh Chou Release Date:2008-12-17 10:03:15.0 Expired Period: Forever Technical Data Sheet - Preliminary Full Color Top View LEDs 67-03/BHGHR6W-B11/2T/MS Package Outline Dimensions 3 CL 4 1 2 2.8±0.2 3 0.7±0.1 2.2±0.1 CL 4 2 1 3.2±0.2 3.5±0.2 1.9±0.2 0.15±0.05 0.8±0.1 0.5±0.1 2.4±0.1 2.8±0.2 2.7±0.2 Recommended soldering pad design 1.6 1.8 0.7 1.8 2.2 0.8±0.1 Notes: 1. All dimensions are in millimeters 2. Tolerance unless mentioned is ±0.1mm Revision Everlight Electronics Co., Ltd. http://www.everlight.com Device No. DSE-0000547 Prepared date: 15-Dec-2008 :1 LifecyclePhase: Rev. 1 Page: 2 of 14 Prepared by: Josh Chou Release Date:2008-12-17 10:03:15.0 Expired Period: Forever Technical Data Sheet - Preliminary Full Color Top View LEDs 67-03/BHGHR6W-B11/2T/MS Absolute Maximum Ratings (Ta=25℃) Parameter Symbol Rating Unit Reverse Voltage VR 5 V Forward Current IF Peak Forward Current (Duty 1/10 @ 1KHz) Pd Power Dissipation Electrostatic Discharge(HBM) Revision IFP ESD GH 25 BH 25 R6 100 GH 100 BH 100 R6 120 GH 95 BH 95 R6 2000 GH 2000 BH 2000 mA mA mW V Topr -40 ~ +85 ℃ Storage Temperature Tstg -40~ +90 ℃ Soldering Temperature Tsol http://www.everlight.com Device No. DSE-0000547 Prepared date: 15-Dec-2008 LifecyclePhase: 50 Operating Temperature Everlight Electronics Co., Ltd. :1 R6 Reflow Soldering : 260 ℃ for 10 sec. Hand Soldering : 350 ℃ for 3 sec. Rev. 1 Page: 3 of 14 Prepared by: Josh Chou Release Date:2008-12-17 10:03:15.0 Expired Period: Forever Technical Data Sheet - Preliminary Full Color Top View LEDs 67-03/BHGHR6W-B11/2T/MS Electro-Optical Characteristics (Ta=25℃) Parameter Luminous Intensity Peak Wavelength Dominant Wavelength Spectrum Radiation Bandwidth Forward Voltage Symbol IV λp λd △λ VF Viewing Angle Reverse Current Min. Typ. Max. R6 210 ----- 300 GH 575 ----- 825 BH 210 ----- 300 R6 ----- 632 ----- GH ----- 518 ----- BH ----- 468 ----- R6 618 ----- 627 GH 524 ----- 531.5 BH 466.5 ----- 474 R6 ----- 20 ----- GH ----- 35 ----- BH ----- 35 ----- R6 1.75 ----- 2.35 GH 2.9 ----- 3.5 BH 2.9 ----- 3.5 ----- 120 ----- R6 ----- ----- 10 GH ----- ----- 50 BH ----- ----- 50 2θ1/2 IR Unit Condition mcd IF=20mA nm IF=20mA nm IF=20mA nm IF=20mA V IF=20mA deg IF=20mA μA VR=5V Note: 1. Tolerance of Luminous Intensity: ±10% 2. Tolerance of Dominant Wavelength: ±1nm 3. Tolerance of Forward Voltage: ±0.1V Revision Everlight Electronics Co., Ltd. http://www.everlight.com Device No. DSE-0000547 Prepared date: 15-Dec-2008 :1 LifecyclePhase: Rev. 1 Page: 4 of 14 Prepared by: Josh Chou Release Date:2008-12-17 10:03:15.0 Expired Period: Forever Technical Data Sheet - Preliminary Full Color Top View LEDs 67-03/BHGHR6W-B11/2T/MS Bin Range of Luminous Intensity Symbol R6 Iv GH BH Bin Code Min. Max. 5a 210 230 5b 230 252 6a 252 275 6b 275 300 10b 575 630 11a 630 690 11b 690 756 12a 756 825 5a 210 230 5b 230 252 6a 252 275 6b 275 300 Unit Condition mcd IF =20mA Note: 1. Tolerance of Luminous Intensity: ±10% Revision Everlight Electronics Co., Ltd. http://www.everlight.com Device No. DSE-0000547 Prepared date: 15-Dec-2008 :1 LifecyclePhase: Rev. 1 Page: 5 of 14 Prepared by: Josh Chou Release Date:2008-12-17 10:03:15.0 Expired Period: Forever Technical Data Sheet - Preliminary Full Color Top View LEDs 67-03/BHGHR6W-B11/2T/MS Bin Range of Dominant Wavelength Symbol RS GB λd B7 Bin Code Min. Max. R1 618 621 R2 621 624 R3 624 627 G1 524 526.5 G2 526.5 529 G3 529 531.5 B1 466.5 469 B2 469 471.5 B2 471.5 474 Bin Code Min. Max. 0 1.75 1.95 1 1.95 2.15 2 2.15 2.35 11 2.90 3.10 12 3.10 3.30 13 3.30 3.50 11 2.90 3.10 12 3.10 3.30 13 3.30 3.50 Unit Condition nm IF =20mA Unit Condition V IF =20mA Bin Range of Forward Voltage Symbol RS VF GB B7 Note: 1. Tolerance of Dominant Wavelength: ±1nm 2. Tolerance of Forward Voltage: ±0.1V Revision Everlight Electronics Co., Ltd. http://www.everlight.com Device No. DSE-0000547 Prepared date: 15-Dec-2008 :1 LifecyclePhase: Rev. 1 Page: 6 of 14 Prepared by: Josh Chou Release Date:2008-12-17 10:03:15.0 Expired Period: Forever Technical Data Sheet - Preliminary Full Color Top View LEDs 67-03/BHGHR6W-B11/2T/MS Typical Electro-Optical Characteristics Curves (BH) Forward Current vs. Forward Voltage Spectrum Distribution Ta=25°C IF (mA) Forward Current 75 50 25 0 400 1000 450 500 550 Wavelength λ (nm) 10 1 -40 -20 0 20 40 40 30 20 10 0 2.6 1000 IF (mA) Forward Current 4.0 f=1KHz Duty=1/10 10 1 0 10 60 80 100 1 2 10 3 10 10 Forward current I F (mA) Radiation Diagram 0° 50 10° Ta=25°C 20° 30° 40 30 40° 1.0 20 10 0 0.9 50° 0.8 60° 70° 0.7 0 20 40 60 80 100 Ambient temperature Ta (°c) Everlight Electronics Co., Ltd. http://www.everlight.com Device No. DSE-0000547 Prepared date: 15-Dec-2008 LifecyclePhase: 3.6 100 Forward Current Derating Curve :1 3.2 Relative Luminous Intensity vs. Forward Current Ta=25°C Ambient temperature Ta (°c) Revision 2.8 Forward Voltage V F (V) Relative Luminous Intensity vs. Ambient Temperature 100 Ta=25°C 50 600 Relative luminous intensity (%) Relative luminous intensity (%) Relative luminous intensity (%) 100 80° 90° 0.5 0.3 0.1 0.2 Rev. 1 0.4 0.6 Page: 7 of 14 Prepared by: Josh Chou Release Date:2008-12-17 10:03:15.0 Expired Period: Forever Technical Data Sheet - Preliminary Full Color Top View LEDs 67-03/BHGHR6W-B11/2T/MS Typical Electro-Optical Characteristics Curves (GH) Forward Current vs. Forward Voltage Ta=25°C IF (mA) 100 Forward Current 75 50 25 0 400 1000 450 500 550 Wavelength λ (nm) 40 30 20 10 0 2.4 2.8 2.6 3.2 3.6 100 10 0 20 40 60 80 100 Relative Luminous Intensity vs. Forward Current Ta=25°C 1000 f=1KHz Duty=1/10 100 10 1 0 10 2 1 10 10 IF(mA) Forward Current Ambient Temperature Ta (°C) Radiation Diagram IF (mA) 0° Forward Current 4.0 Forward Voltage VF (V) Relative Luminous Intensity vs. Ambient Temperature 1 -60 -40 -20 Ta=25°C 50 600 Relative luminous intensity (%) Relative luminous intensity (%) Relative luminous intensity (%) Spectrum Distribution 10° 50 Ta=25°C 20° 30° 40 30 20 10 0 40° 1.0 0.9 50° 0.8 60° 70° 0.7 0 20 40 60 80 100 80° 90° 0.5 0.3 0.1 0.2 0.4 0.6 Ambient Temperature Ta (°C) Revision Everlight Electronics Co., Ltd. http://www.everlight.com Device No. DSE-0000547 Prepared date: 15-Dec-2008 :1 LifecyclePhase: Rev. 1 Page: 8 of 14 Prepared by: Josh Chou Release Date:2008-12-17 10:03:15.0 Expired Period: Forever Technical Data Sheet - Preliminary Full Color Top View LEDs 67-03/BHGHR6W-B11/2T/MS Typical Electro-Optical Characteristics Curves (R6) Forward Current vs. Forward Voltage Spectrum Distribution Ta=25°C 75 50 25 0 550 600 650 700 Wavelength λ (nm) 40 30 20 10 0 2.0 2.4 2.8 Relative Luminous Intensity vs. Forward Current Ta=25°C 1000 100 10 1000 f=1KHz Duty=1/10 100 10 0 20 40 60 80 100 Ambient Temperature Ta (°C) 1 0 10 Radiation Diagram 0° 10° Forward Current I F (mA) 60 40 Ta=25°C 20° 30° 40° 1.0 30 0.9 50° 20 0.8 60° 10 0.7 0 20 40 60 80 100 Ambient Ta(°C) Everlight Electronics Co., Ltd. Temperature http://www.everlight.com Device No. DSE-0000547 LifecyclePhase: 10 50 0 :1 3 2 1 10 10 Forward Current I F (mA) Forward Current Derating Curve Revision 3.0 Forward Voltage VF (V) Relative luminous intensity (%) Relative luminous intensity (%) 1.6 1.2 750 Relative Luminous Intensity vs. Ambient Temperature 1 -60 -40 -20 Ta=25°C 50 Forward Current I F (mA) Relative luminous intensity (%) 100 Prepared date: 15-Dec-2008 70° 80° 90° 0.5 0.3 0.1 Rev. 1 0.2 0.4 0.6 Page: 9 of 14 Prepared by: Josh Chou Release Date:2008-12-17 10:03:15.0 Expired Period: Forever Technical Data Sheet - Preliminary Full Color Top View LEDs 67-03/BHGHR6W-B11/2T/MS Label Explanation Pb CAT: Luminous Intensity Rank EVERLIGHT CPN : P N : XXXXXXXXXXXXX RoHS HUE: Dom. Wavelength Rank XXXXXXXXXXXXX REF: Forward Voltage Rank CAT : XXX HUE : XXX REF : XXX QTY : XXX LOT NO : XXXXXXXXXX Reference : XXXXXXXX MADE IN TAIWAN Reel Dimensions Note: Tolerance unless mentioned is ±0.1mm; Unit = mm Revision Everlight Electronics Co., Ltd. http://www.everlight.com Device No. DSE-0000547 Prepared date: 15-Dec-2008 :1 LifecyclePhase: Rev. 1 Page: 10 of 14 Prepared by: Josh Chou Release Date:2008-12-17 10:03:15.0 Expired Period: Forever Technical Data Sheet - Preliminary Full Color Top View LEDs 67-03/BHGHR6W-B11/2T/MS Carrier Tape Dimensions: Loaded Quantity 2000 pcs Per Reel. + Note: Tolerance unless mentioned is ±0.1mm; Unit = mm Moisture Resistant Packaging Label Revision Aluminum moistue-proof bag Everlight Electronics Co., Ltd. http://www.everlight.com Device No. DSE-0000547 Prepared date: 15-Dec-2008 :1 LifecyclePhase: Desiccant Rev. 1 Label Page: 11 of 14 Prepared by: Josh Chou Release Date:2008-12-17 10:03:15.0 Expired Period: Forever Technical Data Sheet - Preliminary Full Color Top View LEDs 67-03/BHGHR6W-B11/2T/MS Reliability Test Items and Conditions The reliability of products shall be satisfied with items listed below. Confidence level：90% LTPD：10% No. Items Test Condition Test Hours/Cycles Sample Size Ac/Re 1 Reflow Soldering Temp. : 260℃±5℃ Min. 5sec. 6 Min. 22 PCS. 0/1 300 Cycles 22 PCS. 0/1 300 Cycles 22 PCS. 0/1 H : +100℃ 15min 2 Temperature Cycle ∫ 5 min L : -40℃ 15min H : +100℃ 5min 3 Thermal Shock ∫ 10 sec L : -10℃ 5min Revision 4 High Temperature Storage Temp. : 100℃ 1000 Hrs. 22 PCS. 0/1 5 Low Temperature Storage Temp. : -40℃ 1000 Hrs. 22 PCS. 0/1 6 DC Operating Life IF = 20 mA 1000 Hrs. 22 PCS. 0/1 7 High Temperature / High Humidity 85℃/ 85%RH 1000 Hrs. 22 PCS. 0/1 Everlight Electronics Co., Ltd. http://www.everlight.com Device No. DSE-0000547 Prepared date: 15-Dec-2008 :1 LifecyclePhase: Rev. 1 Page: 12 of 14 Prepared by: Josh Chou Release Date:2008-12-17 10:03:15.0 Expired Period: Forever Technical Data Sheet - Preliminary Full Color Top View LEDs 67-03/BHGHR6W-B11/2T/MS Precautions for Use 1. Over-current-proof Customer must apply resistors for protection; otherwise slight voltage shift will cause big current change (Burn out will happen). 2. Storage 2.1 Do not open moisture proof bag before the products are ready to use. 2.2 Before opening the package: The LEDs should be kept at 30℃ or less and 90%RH or less. 2.3 After opening the package: The LED's floor life is 1 year under 30℃ or less and 60% RH or less. If unused LEDs remain, it should be stored in moisture proof packages. 2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the storage time, baking treatment should be performed using the following conditions. Baking treatment: 60±5℃ for 24 hours. 3. Soldering Condition 3.1 Pb-free solder temperature profile 1~5 °C / Sec. 260°C. Max. 10 Sec. Max. 1~5 °C / Sec. Pre-heating 180~200°C 60 Sec. Max. Above 220°C 120 Sec. Max. 3.2 Reflow soldering should not be done more than two times. 3.3 When soldering, do not put stress on the LEDs during heating. 3.4 After soldering, do not warp the circuit board. Revision Everlight Electronics Co., Ltd. http://www.everlight.com Device No. DSE-0000547 Prepared date: 15-Dec-2008 :1 LifecyclePhase: Rev. 1 Page: 13 of 14 Prepared by: Josh Chou Release Date:2008-12-17 10:03:15.0 Expired Period: Forever Technical Data Sheet - Preliminary Full Color Top View LEDs 67-03/BHGHR6W-B11/2T/MS 4. Soldering Iron Each terminal is to go to the tip of soldering iron temperature less than 350℃ for 3 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder. 5. Repairing Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing. EVERLIGHT ELECTRONICS CO., LTD. Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Tucheng, Taipei 236, Taiwan, R.O.C Revision Tel: 886-2-2267-2000, 2267-9936 Fax: 886-2267-6244, 2267-6189, 2267-6306 http://www.everlight.com Everlight Electronics Co., Ltd. http://www.everlight.com Device No. DSE-0000547 Prepared date: 15-Dec-2008 :1 LifecyclePhase: Rev. 1 Page: 14 of 14 Prepared by: Josh Chou Release Date:2008-12-17 10:03:15.0 Expired Period: Forever