REVISION N DO NOT SCALE FROM THIS PRINT NOTES: 1. CUSTOM FOR VARIATION OF VITA 42 XMC STANDARD & ITEMS -1, -2, & -3 NOT AVAILABLE AS STANDARD. 2. C REPRESENTS A CRITICAL DIMENSION. 3. BURR ALLOWANCE: .0015[0.038] MAX. 4. MAXIMUM CUT FLASH: .010[0.25]. 5. MINIMUM PUSHOUT FORCE: .5 LB. 6. MAXIMUM ALLOWABLE BOW; TOP/BOTTOM: .004[0.10], SIDE/SIDE: .003[0.08]. 7. PARTS TO BE PACKAGED IN TAPE & REEL. FOR QTY`S LESS THAN 125 PCS, NO TRAILER OR LEADER WILL BE SUPPLIED. ANY REV MADE TO THIS PRINT MUST HAVE AN UPDATED MKT PRINT .255 6.48 .339 8.61 REF 1.050 26.67 REF 'A' .990 25.15 REF C1 .900 22.86 REF (19 POS - 1) X .0500[1.270] IN-PROCESS 19 01 .008±.002 0.20±0.05 A .250 6.35 REF B C .155 3.94 REF .105 2.67 .350 8.89 REF REF D E F .460 11.68 REF DETAIL 'A' SCALE 6 : 1 .420 10.67 REF .020±.010 0.51±0.25 .295±.020 7.49±0.51 5 2 MAX SWAY (TYP) "A" 1 .016 0.41 REF (TYP) .155 3.94 REF .083 2.11 .363 9.22 .278 7.05 3 .0060[0.152] .073 1.85 REF "A" 2 ITEM NO. PART NUMBER QTY MATERIAL 1 ASP-103598-01-B 1.0000 UL 94 V0, COLOR: BLACK 2 ASP-103599-01-B 1.0000 UL 94 V0, COLOR: BLACK 3 ASP-104554-02-P-H 114.00 BRASS ALLOY 260, 3/4 HARD 4 SBD-030-6337 114.00 63% TIN /37% LEAD 5 K-850-650 1.0000 POLYIMIDE FILM 6 CT-ASP1134MS .0057 CONDUCTIVE POLYMER UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN INCHES. TOLERANCES ARE: DECIMALS .XX: .01 .XXX: .005 .XXXX: .0020 ANGLES 2 4 SECTION "A"-"A" PROPRIETARY NOTE THIS DOCUMENT CONTAINS INFORMATION CONFIDENTIAL AND PROPRIETARY TO SAMTEC, INC. AND SHALL NOT BE REPRODUCED OR TRANSFERRED TO OTHER DOCUMENTS OR DISCLOSED TO OTHERS OR USED FOR ANY PURPOSE OTHER THAN THAT WHICH IT WAS OBTAINED WITHOUT THE EXPRESSED WRITTEN CONSENT OF SAMTEC, INC. DO NOT SCALE DRAWING SHEET SCALE: 3:1 PLATING ON ENTIRE TERMINAL: .000030 GOLD OVER .000050 NICKEL c:\enterprisevault\DWG\MISC\MKTG\ASP-103614-01-MKT.SLDDRW 520 PARK EAST BLVD, NEW ALBANY, IN 47150 PHONE: 812-944-6733 FAX: 812-948-5047 e-Mail [email protected] code 55322 DESCRIPTION: DWG. NO. VITA 42 (LEADED) 10MM MATED SOCKET ASSEMBLY ASP-103614-01 BY: CLAY W 10/18/2002 SHEET 1 OF 2 ASP-103614-01 RECOMMENDED STENCIL LAYOUT STENCIL TO BE .0060[0.152] THICK REVISION N RECOMMENDED BOARD LAYOUT .900 22.86 .050 1.27 (TYP) 01 01 19 A .250 6.35 19 A B .900 22.86 .250 6.35 C D B E C F .0250 0.635 (TYP) D .050 1.27 (TYP) E F SEE DETAIL 'B' 1.732 44.00 REF .0250 [0.640] .945 24.00 REF .0100 [0.254] TRACE USER DIRECTION OF UN-REELING POCKET NOT DETAILED 6 .0310 [0.787] FREE OF SOLDER MASK .0200 [0.508] PAD .0100 [0.254] VIA (PLATED) PACKAGING VIEW 45° PROPRIETARY NOTE DETAIL 'B' THIS DOCUMENT CONTAINS INFORMATION CONFIDENTIAL AND PROPRIETARY TO SAMTEC, INC. AND SHALL NOT BE REPRODUCED OR TRANSFERRED TO OTHER DOCUMENTS OR DISCLOSED TO OTHERS OR USED FOR ANY PURPOSE OTHER THAN THAT WHICH IT WAS OBTAINED WITHOUT THE EXPRESSED WRITTEN CONSENT OF SAMTEC, INC. SHEET SCALE: 4:1 520 PARK EAST BLVD, NEW ALBANY, IN 47150 PHONE: 812-944-6733 FAX: 812-948-5047 e-Mail [email protected] code 55322 DESCRIPTION: VITA 42 (LEADED) 10MM MATED SOCKET ASSEMBLY DWG. NO. ASP-103614-01 BY: CLAY W c:\enterprisevault\DWG\MISC\MKTG\ASP-103614-01-MKT.SLDDRW 10/18/2002 SHEET 2 OF 2