REVISION A DO NOT SCALE FROM THIS PRINT NOTES: 1. .342 STACKER HEIGHT NOT AVAILABLE AS STANDARD. 2. C REPRESENTS A CRITICAL DIMENSION. 3. BURR ALLOWANCE: .0015[0.038] MAX. 4. MINIMUM PUSHOUT FORCE: SIGNAL: .5 LB, GROUND: 1 LB. 5. MAX VARIANCE OF .002[0.05]. 6. DIMENSION APPLIES TO CONTACTS & GROUND PLANES. 7. GROUND PLANE PRESS HEIGHT MUST BE .003[0.08] LESS THAN THE MAX HEIGHT OR .001[0.03] GREATER THAN THE MINIMUM HEIGHT OF THE TERMINAL. 8. PARTS TO BE PACKAGED IN TRAYS. C1 .835 21.21 (((26 POS/ 26) x .840[21.34]) - .005[0.13]) .090 2.29 REF C2 .625 15.88 25 EQ SPACES @ .0250[.635] 01 ACCEPTANCE OF DRAWING ACCEPTED WITH DEVIATIONS LISTED .286 7.26 REF 02 5 .295±.020 7.48±0.51 .009 0.23 REF .216 5.49 REF .835 21.21 REF "A" 1 .035±.020 0.89±0.51 .212 5.38 REF 2 "A" .035 0.89 REF FAX No: PHONE No: PRINTED NAME CUSTOMER SIGNATURE COMPANY: DATE: .105 2.67 REF .735 18.67 ITEM NO. PART NUMBER QUANTITY MATERIAL 1 QMSS-26-05.75-D-01 1.0000 VECTRA E130i, COLOR: BLACK 2 ASP-129634-01-B 1.0000 VECTRA E130i, COLOR: BLACK 3 ASP-129635-02-P-S 52.000 PHOS BRONZE, 521 EXTRA SPRING TEMPER 4 ASP-129636-02-P-L 1.0000 PHOS BRONZE, 510 FULL HARD TEMPER 5 K-500-300 1.0000 POLYAMIDE FILM (KAPTON) 6 TY-ASP-088 .01786 ANTI-STATIC BLACK HIPS POLARIZATION NOTCHES .040 1.02 REF (TYP) UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN INCHES. TOLERANCES ARE: DECIMALS ANGLES .XX: .01[.3] .XXX: .005[.13] .XXXX: .0020[.051] 2 PROPRIETARY NOTE THIS DOCUMENT CONTAINS INFORMATION CONFIDENTIAL AND PROPRIETARY TO SAMTEC, INC. AND SHALL NOT BE REPRODUCED OR TRANSFERRED TO OTHER DOCUMENTS OR DISCLOSED TO OTHERS OR USED FOR ANY PURPOSE OTHER THAN THAT WHICH IT WAS OBTAINED WITHOUT THE EXPRESSED WRITTEN CONSENT OF SAMTEC, INC. DO NOT SCALE DRAWING SHEET SCALE: 2.5:1 520 PARK EAST BLVD, NEW ALBANY, IN 47150 PHONE: 812-944-6733 FAX: 812-948-5047 e-Mail: [email protected] code: 55322 DESCRIPTION: ELEVATED QMS ASSM PLATING: CONTACT AREA: .000030 GOLD OVER .000050 NICKEL REMAINDER: .000200 REF TIN OVER .000050 NICKEL DWG. NO. c:\enterprisevault\DWG\MISC\MKTG\ASP-129637-01-MKT.SLDDRW BY: CLAY W ASP-129637-01 12/12/2006 SHEET 1 OF 2 ASP-129637-01 RECOMMENDED PCB LAYOUT REVISION A .735 18.67 .025 0.64 (TYP) .016 0.41 02 .046 1.17 NPTH (TYP 2 PLCS) .075 1.91 .320 8.13 .020 0.51 .055 1.40 01 CL .625 15.88 .680 17.27 (ALL DIMENSIONS ARE SYMMETRIC ABOUT THE CENTERLINE) IN-PROCESS .010 0.25 REF C4 +.0040 +0.10 .1150 - .0010 2.921 - 0.03 (MEASURED TERMINAL TO TERMINAL) C5 +.0040 +0.10 .3420 - .0020 8.688 - 0.05 (SEE NOTE 5) C5 C6 +.0040 +0.10 .3420 - .0020 8.688 - 0.05 (SEE NOTES 5, 6, & 7) .347±.004 8.81±0.10 .004[0.10] C6 .004[0.10] (SEE NOTE 6) 3 .022 0.56 REF 4 .296±.006 7.52±0.15 PROPRIETARY NOTE THIS DOCUMENT CONTAINS INFORMATION CONFIDENTIAL AND PROPRIETARY TO SAMTEC, INC. AND SHALL NOT BE REPRODUCED OR TRANSFERRED TO OTHER DOCUMENTS OR DISCLOSED TO OTHERS OR USED FOR ANY PURPOSE OTHER THAN THAT WHICH IT WAS OBTAINED WITHOUT THE EXPRESSED WRITTEN CONSENT OF SAMTEC, INC. SHEET SCALE: 5:1 520 PARK EAST BLVD, NEW ALBANY, IN 47150 PHONE: 812-944-6733 FAX: 812-948-5047 e-Mail: [email protected] code: 55322 DESCRIPTION: DWG. NO. SECTION "A"-"A" SCALE 5 : 1 ELEVATED QMS ASSM ASP-129637-01 BY: CLAY W c:\enterprisevault\DWG\MISC\MKTG\ASP-129637-01-MKT.SLDDRW 12/12/2006 SHEET 2 OF 2