REVISION R DO NOT SCALE FROM THIS PRINT ANY REV MADE TO THIS PRINT MUST HAVE AN UPDATED MKT PRINT NOTES: 1. ITEMS -1, -2, & -3 NOT AVAILABLE AS STANDARD, CUTOM FOR VARIATION OF VITA 42 XMC STANDARDS. 2. C REPRESENTS A CRITICAL DIMENSION. 3. MAXIMUM BURR ALLOWANCE: .0015[0.038] 4. MAXIMUM CUT FLASH: .010[0.25] 5. MINIMUM PUSHOUT FORCE: .5 LB [2.22N] 6. MAXIMUM ALLOWABLE BOW; TOP/BOTTOM: .006[0.15], SIDE/SIDE: .003[0.08]. C 7. PARTS TO BE PACKAGED IN TAPE & REEL. FOR QTY'S LESS THAN 125 PCS, NO TRAILER OR LEADER WILL BE SUPPLIED. 8. LEAD FREE SOLDER BALLS C 1.050 26.67 REF .980 24.89 REF C .900 22.86 (19 POS - 1) X .0500[1.270] .020±.010 0.51±0.25 01 A .250 6.35 C B C .155 3.94 REF .105 2.67 REF D .350 8.89 REF .420 10.67 REF .008±.002 0.20±0.05 DETAIL 'G' SCALE 10 : 1 E F SOLDER BALL REMOVED FOR CLARITY .460 11.68 REF 6 .295±.020 7.49±0.51 C 2 MAX SWAY (EITHER DIRECTION) 1 .016 0.41 REF (TYP) "A" .100 2.54 REF .155 3.94 REF .084 2.13 REF C .339 8.61 REF .363 9.22 .278 7.05 C .0060[0.152] 2 3 .073 1.85 REF 5 SECTION "A"-"A" 'G' "A" NON STANDARD ITEM NO. PART NUMBER QUANTITY MATERIAL 1 ASP-144052-01-B 1.0000 UL 94 V0, COLOR: BLACK 2 ASP-136535-01-B 1.0000 UL 94 V0, COLOR: BLACK 3 ASP-104554-02-P-H 114.00 BRASS ALLOY 260, 3/4 HARD 4 CT-ASP1134MS .00571 CONDUCTIVE POLYMER 5 SDB-030-9653 114.00 96.5% TIN / 3% SILVER/ 0.5% COPPER 6 K-850-650 1.0000 POLYIMIDE FILM COMPONENT DECIMALS .XX: .01 .XXX: .005 .XXXX: .0020 ASSEMBLY TOOLING PROCESS UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN INCHES. TOLERANCES ARE: ANGLES 2 PROPRIETARY NOTE THIS DOCUMENT CONTAINS INFORMATION CONFIDENTIAL AND PROPRIETARY TO SAMTEC, INC. AND SHALL NOT BE REPRODUCED OR TRANSFERRED TO OTHER DOCUMENTS OR DISCLOSED TO OTHERS OR USED FOR ANY PURPOSE OTHER THAN THAT WHICH IT WAS OBTAINED WITHOUT THE EXPRESSED WRITTEN CONSENT OF SAMTEC, INC. DO NOT SCALE DRAWING X PLATING: .000030 GOLD OVER .000050 NICKEL SHEET SCALE: 3:1 520 PARK EAST BLVD, NEW ALBANY, IN 47150 PHONE: 812-944-6733 FAX: 812-948-5047 e-Mail [email protected] code 55322 DESCRIPTION: VITA 42 (LEAD FREE) SOCKET ASSEMBLY DWG. NO. PACKAGING OTHER F:\DWG\MISC\MKTG\ASP-103614-04-MKT.SLDDRW ASP-103614-04 BY: TAMMY W 09/11/06 SHEET 1 OF 2 REVISION R RECOMMENDED STENCIL LAYOUT RECOMMENDED BOARD LAYOUT STENCIL TO BE .0060[0.152] THICK .900 22.86 01 .250 6.35 A B 19 A B 19 .050 1.27 (TYP) 01 .900 22.86 .250 6.35 C C D E D F E .050 1.27 (TYP) F .0250 0.635 (TYP) SEE DETAIL 'B' WIDE NOTCH POSITIONED TOWARD ROUND HOLES. .025 0.64 1.732 44.00 REF "F" .0100 [.254] TRACE "F" .945 24.00 REF .0310 [ .787] FREE OD SOLDER MASK USER DIRECTION OF UN-REELING POCKET NOT DETAILED .0200 [ .635] PAD .0100 [ .305] VIA (PLATED) 45° 4 SECTION "F"-"F" SCALE 1 : 1 PACKAGING VIEW DETAIL 'B' PROPRIETARY NOTE THIS DOCUMENT CONTAINS INFORMATION CONFIDENTIAL AND PROPRIETARY TO SAMTEC, INC. AND SHALL NOT BE REPRODUCED OR TRANSFERRED TO OTHER DOCUMENTS OR DISCLOSED TO OTHERS OR USED FOR ANY PURPOSE OTHER THAN THAT WHICH IT WAS OBTAINED WITHOUT THE EXPRESSED WRITTEN CONSENT OF SAMTEC, INC. SHEET SCALE: 3:1 520 PARK EAST BLVD, NEW ALBANY, IN 47150 PHONE: 812-944-6733 FAX: 812-948-5047 e-Mail [email protected] code 55322 DESCRIPTION: VITA 42 (LEAD FREE) SOCKET ASSEMBLY DWG. NO. F:\DWG\MISC\MKTG\ASP-103614-04-MKT.SLDDRW ASP-103614-04 BY: TAMMY W 09/11/06 SHEET 2 OF 2