S2GVB20-C ~ S2GVB80-C Voltage 200V ~ 800V 2 Amp Glass Passivited Bridge Rectifiers Elektronische Bauelemente RoHS Compliant Product FEATURES GVB Ideal for printed circuit board Low forward voltage drop, high current capability Reliable low cost construction utilizing molded plastic technique results in inexpensive product These are Halogen & Pb Free components REF. A B C D E Millimeter Min. Max. 15.3 15.9 7.00 7.40 9.00 9.60 10.0 1.20 1.40 REF. F G H I J Millimeter Min. Max. 0.70 0.90 3.90 4.10 0.40 0.60 0.70 1.10 3.20 3.60 MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (Rating 25°C ambient temperature unless otherwise specified. Single phase half wave, 60Hz, resistive or inductive load. For capacitive load, de-rate current by 20%.) Parameter Part Number Symbol Maximum Recurrent Peak Reverse Voltage VRRM Average Rectified Output Current @60HZ sine wave, R-load, TA=25°C Unit S2GVB20-C S2GVB40-C S2GVB60-C S2GVB80-C 200 400 600 800 V IO 2 A IFSM 50 A VFM 1.05 V IRRM 10 µA It 2 10.4 As Typical Thermal Resistance RθJA 62 °C/W Typical Thermal Resistance RθJL 16 °C/W TJ,TSTG 150, -40~150 °C Peak Forward Surge Current @ 60HZ sine wave, 1 cycle, TA=25°C Maximum Peak Forward Voltage Peak Reverse Current 2 1 2 I t Rating for Fusing @1ms≤t＜8.3ms, TJ=25°C Operating and Storage temperature range 2 Notes： 1. VRM=VRRM, Pulse measurement, Rating of per diode. 2. IFM=0.75A, Pulse measurement, Rating of per diode http://www.SeCoSGmbH.com/ 04-Jun-2013 Rev. A Any changes of specification will not be informed individually. Page 1 of 2 S2GVB20-C ~ S2GVB80-C Elektronische Bauelemente Voltage 200V ~ 800V 2 Amp Glass Passivited Bridge Rectifiers RATINGS AND CHARACTERISTIC CURVES http://www.SeCoSGmbH.com/ 04-Jun-2013 Rev. A Any changes of specification will not be informed individually. Page 2 of 2