MW155 120 Watt Medical Adapter Series •100-240 VAC Universal Input •PFC Corrected •Low Life-Cycle Operation Cost •Desktop Style •Complies with EMI/RFI Regulations •CE compliant (LVD, EMC, WEEE, RoHS) •Impact Resistant, Non-vented Polycarbonate Enclosure •IPX1 Compliant •Modified and Custom Designs also Available • Meets ENERGY STAR Criteria Level IV and EISA Requirements — see reverse side for details International Safety Standard Approvals Specifications Output Specifications Environmental Specifications Line and Load Voltage Regulation Excluding Cord ±1% Thermal Performance Operating Temperature 0° C to 40° C with no Derating Ripple 1% Vp-p max. Cooling Transient Response ms max. for 50% load 5 change, slew rate of 0.1A/µs Relative Humidity Non-condensing 5% to 95% Altitude 0-10,000 feet Storage Temp -20° C to +85° C General Specifications Topology Two stage power conversion, current-mode control Efficiency Energy Star Level IV Certifications L60601-1, TUV-EN60601-1, U IEC 60601-1 Hold-up Time 16.7ms min. MTBF 200,000 Hours Weight Case and Dimension 6.6L X 3.2W X 1.6H (in) 167L X 82W X 40H (mm) Case Material 94V-0 Polycarbonate, Black Cord ft (1.8m), 4-conductor, 6 18AWG standard Protection ycle-by-cycle current C limiting, automatic recovery for overload or short circuit; active latchoff OTP; active latch-off OVP Input Specifications Voltage 100-240VAC nominal Line Frequency 47-63Hz Input Current 2.0A max. Protection Input fuse Convectional Non-ventilated Enclosure 24 oz (684 g) SL Power Electronics Corp • 6050 King Drive • Ventura, CA 93003 • Phone:805.486.4565 • Fax:805.487.8911 • Email:[email protected] • www.slpower.com MW155 120 Watt Medical Adapter Series For the most current data and application support visit www.slpower.com Output Currents Output Voltage Min Max Ault Part Number Max Watts MW155RA1251F01 12 V 0.00 A 9.17 A 110.0 W* MW155RA1551F01 15 V 0.00 A 7.33 A 110.0 W MW155RA1851F01 18 V 0.00 A 6.67 A 120.0 W MW155RA2451F01 24 V 0.00 A 5.00 A 120.0 W *12V model rated 100W with input voltages rated 100-110VAC, 110W with input voltages rated 110VAC-240VAC Ault Part Number Key MW155 R A 24 51 F 01 Product Family Name Manufacturing Location Type Revision Output Voltage Output Connector Style Input Connector Style Standard Item (other numbers for custom) General Specifications (continued from p. 1) EMI Compliance EN55011 and FCC conducted and radiated Class B IEC 61000-3-2 Class D IEC 61000-4-2 (ESD), CD level 2 and AD level 3, criterion B IEC 61000-4-3 (RFS), level 2, criterion A IEC 61000-4-4 (EFT), level 2, criterion A IEC 61000-4-5 (Surge), level 3, criterion B Output Connectors Input Connectors IEC320 w/ground C14 (F) IEC320 w/o ground C18 (Q) N. America/ Japan (B) Europe (M) United Kingdom (G) Australian (E) Shaver C8 (N) Optional Features arious output cord wire gauges and connector styles available. See Ault V connector style sheets for connector options “Power-on” LED Active, Latch-off over temperature protection circuit Synchronous rectification Private label marking Ault #51 Minifit over molded connector standard 2007 Energy Independence and Security Act – EISA he Energy Independence and Security Act of 2007 was passed in December of T 2007 and addresses minimum efficiency standards and standby levels for Class A external power supplies that are 250 watts and under. This law stipulates that external power supplies manufactured on July 1, 2008 and beyond meet certain minimum efficiency and standby criteria as defined below. Minimum Efficiency Criteria ctive mode is defined as when a power supply’s input is connected to line A voltage AC and its output is connected to a DC or AC load drawing a portion of the product’s power output. Depending on the power rating for the power supply, it must meet the minimum efficiency criteria outlined below. Energy-Efficiency Criteria for Active Mode: output power on minimum average adapter label efficiency percentage ≥ 0.50 * output power on adapter label 0 to ≤ less than 1 watt ≥ [0.09 * Ln (output power on adapter > 1 to ≤ 51 watts label )] + 0.50 ≥ 0.85 > 51 watts he power supply must also meet a requirement for when its input is T connected to a line voltage AC but its output is not connected to a load. Depending on the power output of the supply, it must keep its energy consumption below the following values. Energy Consumption Criteria for No Load Mode: output power on maximum power consumption adapter label in no-load mode ≤ 0.5 watts 0 to < 250 watts SL Power Electronics Corp • 6050 King Drive • Ventura, CA 93003 • Phone:805.486.4565 • Fax:805.487.8911 • Email:[email protected] • www.slpower.com Data Sheet © 2008 SL Power Electronics Corp. The information and specifications contained in this data sheet are believed to be correct at time of publication. However, SL Power accepts no responsibility for consequences arising from reproduction errors or inaccuracies. Specifications are subject to change without notice. Rev.6/9/08