VISHAY BAS19-V-G

BAS19-V-G, BAS20-V-G, BAS21-V-G
Vishay Semiconductors
Small Signal Switching Diodes, High Voltage
Features
• Silicon epitaxial planar diode
• Fast switching diode in case SOT-23,
especially suited for automatic insertion
• General purpose switching applications
• High conductance
• AEC-Q101 qualified
• Compliant to RoHS Directive 2002/95/EC
and in accordance to WEEE 2002/96/EC
3
1
2
16923
Mechanical Data
Case: SOT-23
Weight: approx. 8.1 mg
Packaging codes/options:
18/10K per 13" reel (8 mm tape), 10K/box
08/3K per 7" reel (8 mm tape), 15K/box
Parts Table
Part
Type differentiation
Ordering code
Marking
Remarks
BAS19-V-G
VRRM = 120 V
BAS19-V-G-18 or BAS19-V-G-08
A8G
Tape and reel
BAS20-V-G
VRRM = 200 V
BAS20-V-G-18 or BAS20-V-G-08
A9G
Tape and reel
BAS21-V-G
VRRM = 250 V
BAS21-V-G-18 or BAS21-V-G-08
AAG
Tape and reel
Document Number 83390
Rev. 1.0, 23-Nov-10
For technical questions within your region, please contact one of the following:
[email protected], [email protected], [email protected]
www.vishay.com
1
BAS19-V-G, BAS20-V-G, BAS21-V-G
Vishay Semiconductors
Absolute Maximum Ratings
Tamb = 25 °C, unless otherwise specified
Parameter
Test condition
Continuous reverse voltage
Repetitive peak reverse voltage
Part
Symbol
Value
Unit
BAS19-V-G
VR
100
V
BAS20-V-G
VR
150
V
BAS21-V-G
VR
200
V
BAS19-V-G
VRRM
120
V
BAS20-V-G
VRRM
200
V
BAS21-V-G
VRRM
250
V
Non-repetitive peak forward
current
t = 1 µs
IFSM
2.5
A
Non-repetitive peak forward
surge current
t=1s
IFSM
0.5
A
Maximum average forward
rectified current
(av. over any 20 ms period)
IF(AV)
200 1)
mA
IF
200 2)
mA
Repetitive peak forward current
IFRM
625
Power dissipation
Ptot
DC forward current
1)
Measured under pulse conditions; Pulse time = Tp ≤ 0.3 ms
2)
Device on fiberglass substrate, see layout on next page
250
mA
2)
mW
Thermal Characteristics
Tamb = 25 °C, unless otherwise specified
Parameter
Test condition
Symbol
RthJA
Thermal resistance junction to ambient air
Junction temperature
Storage temperature range
1)
Value
430
Unit
1)
°C
Tj
150
°C
Tstg
- 65 to + 150
°C
Device on fiberglass substrate, see layout on next page
Electrical Characteristics
Tamb = 25 °C, unless otherwise specified
Parameter
Forward voltage
Leakage current
Dynamic forward resistance
Diode capacitance
Reverse recovery time
www.vishay.com
2
Test condition
Symbol
Max.
Unit
IF = 100 mA
VF
Min.
Typ.
1.0
V
IF = 200 mA
VF
1.25
V
VR = VRmax.
IR
100
nA
VR = VRmax., Tj = 150 °C
IR
100
μA
IF = 10 mA
rf
VR = 0, f = 1 MHz
Ctot
5
pF
IF = IR = 30 mA, RL = 100 Ω,
Irr = 3 mA
trr
50
ns
Ω
5
For technical questions within your region, please contact one of the following: Document Number 83390
[email protected], [email protected], [email protected]
Rev. 1.0, 23-Nov-10
BAS19-V-G, BAS20-V-G, BAS21-V-G
Vishay Semiconductors
Test Circuit and Waveforms
Ω
Ω
Input signal
Test circuit
Input Signal
-
total pulse duration
duty factor
rise time of reverse pulse
reverse pulse duration
Waveforms; IR = 3 m A
tp(tot) = 2 µs
δ = 0.0025
tr = 0.6ns
tp = 100ns
tr = 0.35ns
C < 1pF
Oscilloscope - rise time
- cicuit capitance*
*C = oscilloscope input capactitance + parasitic capacitance
Output signal
18098
Layout for RthJA test
Thickness:
Fiberglass 1.5 mm (0.059 in.)
Copper leads 0.3 mm (0.012 in.)
7.5 (0.3)
3 (0.12)
1 (0.4)
2 (0.8)
1 (0.4)
12 (0.47)
15 (0.59)
2 (0.8)
0.8 (0.03)
5 (0.2)
1.5 (0.06)
5.1 (0.2)
Document Number 83390
Rev. 1.0, 23-Nov-10
17451
For technical questions within your region, please contact one of the following:
[email protected], [email protected], [email protected]
www.vishay.com
3
BAS19-V-G, BAS20-V-G, BAS21-V-G
Vishay Semiconductors
Package Dimensions in millimeters (inches): SOT-23
0.45 (0.018)
0.35 (0.014)
0.35 (0.014)
0° t
o
0.5 (0.020)
0.45 (0.018)
0.9 (0.035)
1.15 (0.045)
8°
0.2 (0.008)
0.098 (0.004)
0.175 (0.007)
0.550 ref. (0.022 ref.)
0.1 (0.004) max.
3.1 (0.122)
2.8 (0.110)
0.3 (0.012)
2.6 (0.102)
2.35 (0.093)
0.7 (0.028)
0.95 (0.037)
0.9 (0.035)
1.43 (0.056)
1 (0.039)
0.9 (0.035)
Foot print recommendation:
2 (0.079)
1 (0.039)
0.9 (0.035)
1.20 (0.047)
0.45 (0.018)
0.35 (0.014)
0.95 (0.037)
Document no.: 6.541-5014.01-4
Rev. 8 - Date: 23.Sept.2009
17418
www.vishay.com
4
For technical questions within your region, please contact one of the following: Document Number 83390
[email protected], [email protected], [email protected]
Rev. 1.0, 23-Nov-10
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree
to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and
damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay
or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to
obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Revision: 12-Mar-12
1
Document Number: 91000