To all our customers Regarding the change of names mentioned in the document, such as Hitachi Electric and Hitachi XX, to Renesas Technology Corp. The semiconductor operations of Mitsubishi Electric and Hitachi were transferred to Renesas Technology Corporation on April 1st 2003. These operations include microcomputer, logic, analog and discrete devices, and memory chips other than DRAMs (flash memory, SRAMs etc.) Accordingly, although Hitachi, Hitachi, Ltd., Hitachi Semiconductors, and other Hitachi brand names are mentioned in the document, these names have in fact all been changed to Renesas Technology Corp. Thank you for your understanding. Except for our corporate trademark, logo and corporate statement, no changes whatsoever have been made to the contents of the document, and these changes do not constitute any alteration to the contents of the document itself. Renesas Technology Home Page: http://www.renesas.com Renesas Technology Corp. Customer Support Dept. April 1, 2003 Cautions Keep safety first in your circuit designs! 1. Renesas Technology Corporation puts the maximum effort into making semiconductor products better and more reliable, but there is always the possibility that trouble may occur with them. Trouble with semiconductors may lead to personal injury, fire or property damage. Remember to give due consideration to safety when making your circuit designs, with appropriate measures such as (i) placement of substitutive, auxiliary circuits, (ii) use of nonflammable material or (iii) prevention against any malfunction or mishap. Notes regarding these materials 1. These materials are intended as a reference to assist our customers in the selection of the Renesas Technology Corporation product best suited to the customer's application; they do not convey any license under any intellectual property rights, or any other rights, belonging to Renesas Technology Corporation or a third party. 2. Renesas Technology Corporation assumes no responsibility for any damage, or infringement of any third-party's rights, originating in the use of any product data, diagrams, charts, programs, algorithms, or circuit application examples contained in these materials. 3. All information contained in these materials, including product data, diagrams, charts, programs and algorithms represents information on products at the time of publication of these materials, and are subject to change by Renesas Technology Corporation without notice due to product improvements or other reasons. It is therefore recommended that customers contact Renesas Technology Corporation or an authorized Renesas Technology Corporation product distributor for the latest product information before purchasing a product listed herein. The information described here may contain technical inaccuracies or typographical errors. Renesas Technology Corporation assumes no responsibility for any damage, liability, or other loss rising from these inaccuracies or errors. Please also pay attention to information published by Renesas Technology Corporation by various means, including the Renesas Technology Corporation Semiconductor home page (http://www.renesas.com). 4. When using any or all of the information contained in these materials, including product data, diagrams, charts, programs, and algorithms, please be sure to evaluate all information as a total system before making a final decision on the applicability of the information and products. Renesas Technology Corporation assumes no responsibility for any damage, liability or other loss resulting from the information contained herein. 5. Renesas Technology Corporation semiconductors are not designed or manufactured for use in a device or system that is used under circumstances in which human life is potentially at stake. Please contact Renesas Technology Corporation or an authorized Renesas Technology Corporation product distributor when considering the use of a product contained herein for any specific purposes, such as apparatus or systems for transportation, vehicular, medical, aerospace, nuclear, or undersea repeater use. 6. The prior written approval of Renesas Technology Corporation is necessary to reprint or reproduce in whole or in part these materials. 7. If these products or technologies are subject to the Japanese export control restrictions, they must be exported under a license from the Japanese government and cannot be imported into a country other than the approved destination. Any diversion or reexport contrary to the export control laws and regulations of Japan and/or the country of destination is prohibited. 8. Please contact Renesas Technology Corporation for further details on these materials or the products contained therein. Description Notes on Using LAN Adapter for E6000/E8000 Emulator (HS6000ELN01H) ADE-702-326 Rev. 1.0 07/08/02 Hitachi, Ltd. HS6000ELN01HE(B) Cautions 1. Hitachi neither warrants nor grants licenses of any rights of Hitachi’s or any third party’s patent, copyright, trademark, or other intellectual property rights for information contained in this document. Hitachi bears no responsibility for problems that may arise with third party’s rights, including intellectual property rights, in connection with use of the information contained in this document. 2. Products and product specifications may be subject to change without notice. Confirm that you have received the latest product standards or specifications before final design, purchase or use. 3. Hitachi makes every attempt to ensure that its products are of high quality and reliability. However, contact Hitachi’s sales office before using the product in an application that demands especially high quality and reliability or where its failure or malfunction may directly threaten human life or cause risk of bodily injury, such as aerospace, aeronautics, nuclear power, combustion control, transportation, traffic, safety equipment or medical equipment for life support. 4. Design your application so that the product is used within the ranges guaranteed by Hitachi particularly for maximum rating, operating supply voltage range, heat radiation characteristics, installation conditions and other characteristics. Hitachi bears no responsibility for failure or damage when used beyond the guaranteed ranges. Even within the guaranteed ranges, consider normally foreseeable failure rates or failure modes in semiconductor devices and employ systemic measures such as fail-safes, so that the equipment incorporating Hitachi product does not cause bodily injury, fire or other consequential damage due to operation of the Hitachi product. 5. This product is not designed to be radiation resistant. 6. No one is permitted to reproduce or duplicate, in any form, the whole or part of this document without written approval from Hitachi. 7. Contact Hitachi’s sales office for any questions regarding this document or Hitachi semiconductor products. IMPORTANT INFORMATION READ FIRST • READ this user's manual before using this emulator product. • KEEP the user's manual handy for future reference. Do not attempt to use the emulator product until you fully understand its mechanism. Emulator Product: Throughout this document, the term "emulator product" shall be defined as the following products produced only by Hitachi, Ltd. excluding all subsidiary products. • • • • • E6000 series emulator station or E8000 series emulator station LAN adapter User system interface cables SIMM memory module Optional boards The user system or a host computer is not included in this definition. Purpose of the LAN Adapter: When Hitachi Debugging Interface (hereinafter referred to as HDI), a software debugging tool that runs on Windows, is used, when LAN-connecting the LAN adapter this LAN adapter is used for LANconnecting an E6000 series emulator or an E8000 series emulator to an host computer, and supports software and hardware development. This LAN adapter must only be used for the above purpose. Improvement Policy: Hitachi, Ltd. (including its subsidiaries, hereinafter collectively referred to as Hitachi) pursues a policy of continuing improvement in design, functions, performance, and safety of the emulator product. Hitachi reserves the right to change, wholly or partially, the specifications, design, user's manual, and other documentation at any time without notice. Target User of the Emulator Product: This emulator product should only be used by those who have carefully read and thoroughly understood the information and restrictions contained in the user's manual. Do not attempt to use the emulator product until you fully understand its mechanism. It is highly recommended that first-time users be instructed by users that are well versed in the operation of the emulator product. i LIMITED WARRANTY Hitachi warrants its emulator products to be manufactured in accordance with published specifications and free from defects in material and/or workmanship. Hitachi, at its option, will repair or replace any emulator products returned intact to the factory, transportation charges prepaid, which Hitachi, upon inspection, determine to be defective in material and/or workmanship. The foregoing shall constitute the sole remedy for any breach of Hitachi's warranty. See the Hitachi warranty booklet for details on the warranty period. This warranty extends only to you, the original Purchaser. It is not transferable to anyone who subsequently purchases the emulator product from you. Hitachi is not liable for any claim made by a third party or made by you for a third party. DISCLAIMER HITACHI MAKES NO WARRANTIES, EITHER EXPRESS OR IMPLIED, ORAL OR WRITTEN, EXCEPT AS PROVIDED HEREIN, INCLUDING WITHOUT LIMITATION THEREOF, WARRANTIES AS TO MARKETABILITY, MERCHANTABILITY, FITNESS FOR ANY PARTICULAR PURPOSE OR USE, OR AGAINST INFRINGEMENT OF ANY PATENT. IN NO EVENT SHALL HITACHI BE LIABLE FOR ANY DIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES OF ANY NATURE, OR LOSSES OR EXPENSES RESULTING FROM ANY DEFECTIVE EMULATOR PRODUCT, THE USE OF ANY EMULATOR PRODUCT, OR ITS DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. EXCEPT AS EXPRESSLY STATED OTHERWISE IN THIS WARRANTY, THIS EMULATOR PRODUCT IS SOLD "AS IS ", AND YOU MUST ASSUME ALL RISK FOR THE USE AND RESULTS OBTAINED FROM THE EMULATOR PRODUCT. ii State Law: Some states do not allow the exclusion or limitation of implied warranties or liability for incidental or consequential damages, so the above limitation or exclusion may not apply to you. This warranty gives you specific legal rights, and you may have other rights which may vary from state to state. The Warranty is Void in the Following Cases: Hitachi shall have no liability or legal responsibility for any problems caused by misuse, abuse, misapplication, neglect, improper handling, installation, repair or modifications of the emulator product without Hitachi's prior written consent or any problems caused by the user system. All Rights Reserved: This user's manual and emulator product are copyrighted and all rights are reserved by Hitachi. No part of this user's manual, all or part, may be reproduced or duplicated in any form, in hard-copy or machine-readable form, by any means available without Hitachi's prior written consent. Other Important Things to Keep in Mind: 1. Circuitry and other examples described herein are meant merely to indicate the characteristics and performance of Hitachi's semiconductor products. Hitachi assumes no responsibility for any intellectual property claims or other problems that may result from applications based on the examples described herein. 2. No license is granted by implication or otherwise under any patents or other rights of any third party or Hitachi. Figures: Some figures in this user's manual may show items different from your actual system. Limited Anticipation of Danger: Hitachi cannot anticipate every possible circumstance that might involve a potential hazard. The warnings in this user's manual and on the emulator product are therefore not all inclusive. Therefore, you must use the emulator product safely at your own risk. iii SAFETY PAGE READ FIRST • READ this user's manual before using this emulator product. • KEEP the user's manual handy for future reference. Do not attempt to use the emulator product until you fully understand its mechanism. DEFINITION OF SIGNAL WORDS This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death. DANGER WARNING CAUTION CAUTION DANGER indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury. WARNING indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury. CAUTION indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury. CAUTION used without the safety alert symbol indicates a potentially hazardous situation which, if not avoided, may result in property damage. NOTE emphasizes essential information. iv WARNING Observe the precautions listed below. Failure to do so will result in a FIRE HAZARD and will damage the user system and the emulator product or will result in PERSONAL INJURY. The USER PROGRAM will be LOST. 1. Do not repair or remodel the emulator product by yourself for electric shock prevention and quality assurance. 2. Always switch OFF the E6000 and E8000 emulator and user system before connecting or disconnecting any CABLES or PARTS. 3. Supply power according to the power specifications and do not apply an incorrect power voltage. Use only the provided power cable. v Preface The LAN adapter for the E6000 / E8000 emulators is described in this description notes. Read this notes and the User's manuals for the E6000 and E8000 emulators. This LAN adapter provides LAN connection of the E6000/E8000 emulator to an host computer, enabling program debugging through an HDI. Notes: 1. Microsoft, Windows, and Windows NT are registered trademarks of Microsoft Corporation in the United States and/or in other countries. Microsoft Windows 95 operating system is referred to as Windows 95, Microsoft Windows 98 operating system is referred to as Windows 98, and Microsoft Windows NT operating system is referred to as Windows NT in this description notes. 2. IBM PC is a registered trademark of International Business Machines Corporation. 3. The TCP/IP communication functions of this product include the AVE-TCP of ACCESS CO., LTD. AVE-TCP is a trademark of ACCESS CO.,LTD. 4. Displays in this notes are examples at using the Windows 98. 5. Pentium is a registered trademark of Intel. vi Contents Section 1 Overview ............................................................................................1 1.1 1.2 System Configuration .......................................................................................................1 Operating Environments ...................................................................................................2 Section 2 Components .......................................................................................3 2.1 LAN Adapter ....................................................................................................................4 Section 3 Preparation Before Use.....................................................................6 3.1 3.2 3.3 3.4 Power Supply ....................................................................................................................6 3.1.1 AC Adapter ..........................................................................................................6 3.1.2 Polarity.................................................................................................................6 Connecting LAN Cable to LAN Adapter..........................................................................7 Connecting LAN Adapter to E6000 Emulator ..................................................................8 Connecting LAN Adapter to E8000 Emulator ..................................................................9 Section 4 Setting up the LAN Adapter ............................................................11 4.1 4.2 4.3 Procedures.........................................................................................................................11 Selecting the LAN Driver .................................................................................................12 Setting the IP Address of the LAN Adapter......................................................................12 Section 5 Troubleshooting.................................................................................14 Section 6 Environmental Conditions ...............................................................15 Section 7 External Dimensions of the LAN Adapter......................................16 vii Section 1 Overview This section describes the system configuration at LAN connection and the LAN adapter. 1.1 System Configuration Figure 1 shows the system configuration when connecting the E6000 emulator and the LAN adapter. The E8000 emulator can be connected in the same way. Refer to figure 7 when connecting the E8000 emulator and the LAN adapter. The host computer containing Windows and the LAN adapter are connected via the LAN interface (10BASE-T or 100BASE-TX). The LAN adapter and the E6000/E8000 emulator are connected through the PC interface cable. Host computer (Windows®) LAN AC AC power-supply adapter E6000 HITACHI HS6000ELN01H PC interface cable E6000 emulator LAN adapter AC AC power-supply adapter Figure 1 System Configuration of E6000 Emulator Connection 1 1.2 Operating Environments Table 1 Operating Environments Item Description Host computer Built-in Pentium or higher-performance CPU (166 MHz or higher recommended) OS Windows 95, Windows 98, or Windows NT 4.0 (Not operated in Windows 3.1) Minimum memory capacity 32 Mbytes (double of the load-module file size recommended) Hard-disk capacity Installation disk capacity: 10 Mbytes or more At initiation: At least double the memory capacity (four-times or more recommended) 2 Floppy disk drive 3.5 inches (2 HD) for installation Display Resolution: 640 x 480 or more (800 x 600 or more recommended) LAN type 10 BASE-T/100 BASE-TX based on IEEE 802.3 Protocol TCP/IP (when using the LAN adapter configuration (setting the IP), UDP) Others Mouse (or a pointing device such as a mouse) Section 2 Components Table 2 lists the components of the LAN adapter. Table 2 Components Item Product Name Hardware Configuration Quantity Remarks LAN adapter 1 Number of printed circuit boards mounted: 1 PC interface cable 1 Cable length: 1.5 m With a ferrite core (for EMI* disturbance) Documentation AC power-supply adapter 1 Cable length: 1.8 m AC power-supply cable 1 Cable length: 2.5 m Description Notes on Using LAN Adapter for E6000/E8000 Emulator (HS6000ELN01H) (This manual) 1 HS6000ELN01HE(A) Note: EMI is an abbreviation of electrical magnetic interference. 3 2.1 LAN Adapter Figure 2 shows each part of the LAN adapter. 1 HS6000ELN01H LAN PC Sp e Co ed Tx l Rx Lin Fu k ll I/F HITACHI DC IN POWER + - 6 + + 2 3 4 5 Figure 2 LAN Adapter Numbers in figure 2 indicate the following: (1) Product name: Product name (HS6000ELN01H) of the LAN adapter. (2) 100BASE-TX/10BASE-T port: Connects the LAN cable. (3) LED displaying the communication state: Table 3 shows the LED names, contents, and states at power-on. Table 3 LED Names, Contents, and States at Power-on LED Name LED Contents Speed During 100BASE-TX mode communication: Lit During 10BASE-T mode communication: Unlit Col During collision detection in half-duplex mode (with Monostable function): Lit Tx During data transmission (with Monostable function): Lit Rx During data receiving (with Monostable function): Lit Link During normal linking (communication with the connected hub enabled): Lit Full During full-duplex mode communication: Lit Note: The LAN adapter only lights "Speed" if the LAN cable is not connected at power-on. (4) Power switch: Power switch for the LAN adapter (Pressing the O–side powers-on the adapter. Pressing the I-side powers-off the adapter.). (5) Power input connector: Inputs the external AC power supply by using the power adapter of the LAN adapter. (6) PC interface cable connector: Connects the emulator. 4 Figure 3 shows the label on the back of the LAN adapter. The MAC address of the LAN adapter is printed on the back label. MODEL HS6000ELN01H SERIAL No. WS0007 C DS 5V 2. OA + MADE IN JAPAN MAC ADDRESS 00-00-E1-0C-5B-06 Figure 3 LAN Adapter Label 5 Section 3 Preparation Before Use 3.1 Power Supply 3.1.1 AC Adapter The AC adapter supplied with the E6000 emulator must be used at all times. 3.1.2 Polarity Figure 4 shows the polarity of the power-supply plug. Figure 4 Polarity of Power Supply Plug 6 3.2 Connecting LAN Cable to LAN Adapter WARNING Always switch OFF the emulator product and user system before connecting or disconnecting the LAN adapter. Failure to do so will result in a FIRE HAZARD and will damage the user system, LAN adapter, and emulator product or will result in PERSONAL INJURY. Use the AC power-supply adapter provided in the package. (1) Connect the LAN cable to the LAN socket as shown in figure 5. (2) Connect the AC power-supply adapter to the DCIN socket. HS6000ELN01H LAN + DC IN POWER + PC HUB Sp e Co ed Tx l Rx Lin Fu k ll I/F HITACHI - + AC power-supply adapter Figure 5 Connecting LAN Cable to LAN Adapter 7 3.3 Connecting LAN Adapter to E6000 Emulator WARNING Always switch OFF the emulator product and user system before connecting or disconnecting the LAN adapter. Failure to do so will result in a FIRE HAZARD and will damage the user system, LAN adapter, and emulator product or will result in PERSONAL INJURY. To use the E6000 emulator, connect the LAN adapter to the E6000 emulator station via the supplied PC interface cable, as shown in figure 6. Connect the PC interface cable connector with a ferrite core to the E6000 emulator. LAN adapter Rear panel of E6000 emulator station POWER DC IN PC IF O I PC EML Ferrite core PC interface cable Figure 6 Connecting LAN adapter to E6000 Emulator 8 Connector with EML label 3.4 Connecting LAN Adapter to E8000 Emulator WARNING Always switch OFF the emulator product and user system before connecting or disconnecting the LAN adapter. Failure to do so will result in a FIRE HAZARD and will damage the user system, LAN adapter, and emulator product or will result in PERSONAL INJURY. NOTE: When connecting the E8000 emulator to the host computer using a LAN adapter, select host computerinterface (S7: ON, S8: ON) for the console setting. For details, refer to 3.3 System Connection in the E8000 emulator user's manual. To use the E8000 emulator, connect the LAN adapter to the E8000 emulator station via the supplied PC interface cable, as shown in figure 7. Connect the PC interface cable connector with a ferrite core to the E8000 emulator. 9 Rear panael of E8000 emulator station DCONT TRC CONT DCONT TRC CONT LAN PARALLEL JTAG CN1 POWER PCIF Connector with EML label EML CN2 CN3 250V 3A AC INPUT SERIAL PC TRACE PC interface cable Figure 7 Connecting LAN Adapter to E8000 Emulator 10 SW1 Ferrite core SW2 P8 LAN Adapter AC100-120V/ AC200-240V 2A 50/60Hz Section 4 Setting up the LAN Adapter 4.1 Procedures Figure 8 shows the setup procedures of the LAN adapter. Since the IP address and the subnet mask are not set in the LAN adapter, set them to the LAN adapter before using. (1) Select the LAN driver at HDI installation (refer to section 4.2, Selecting the LAN Driver). (2) Check that the IP address is set to the host computer. (3) Connect the device according to figures 1 and 2. (4) Power-on the LAN adapter and the emulator. (5) Set the IP address of the LAN adapter (the IP address must be set from within the same network). Refer to section 4.3, Setting the IP Address of the LAN Adapter. (6) Power off the LAN adapter and then power on again. Figure 8 Setup Procedures 11 4.2 Selecting the LAN Driver During HDI installation, select 'LAN' in the [Select Driver Type] dialog box. Figure 9 [Select Driver Type] Dialog Box 4.3 Setting the IP Address of the LAN Adapter To set the IP address to the LAN adapter, the LAN adapter configuration (LAC) in the HDI is needed. 1. Initiating the LAN adapter configuration Select 'LAN adapter configuration' from the installed HDI program menu. Figure 10 HDI Program Menu 12 2. After initiating 'LAN adapter configuration', the following dialog box is displayed. Figure 11 [LAN adapter configuration] Dialog Box 3. The IP address for the LAN adapter can be set and the setting information can be defined from the PC used in setting up, by selecting 'Setting and registering of the IP address'. 4. The LAN adapter to be connected can be selected from the LAN adapter information in the configuration database defined in the PC by selecting 'Selecting the LAN adapter to be connected'. 5. The IP address set for the LAN adapter, subnet mask, and the default gateway can be checked by selecting 'Checking the IP address of the LAN adapter'. On-line help can be displayed by clicking the Help button in any LAN adapter configuration dialog box. Refer to the on-line help for assistance with usage or troubleshooting. NOTE: To set the IP address of the LAN adapter, connect the host computer and LAN adapter to the same network. After the IP address is set in the LAN adapter, be sure to power-off the adapter, and on again before continuing to use it. 13 Section 5 Troubleshooting The problems that may occur when using the LAN adapter and the measures to be taken are as follows. 1. When the LAN adapter configuration is used, the IP address cannot be set in the LAN adapter or the IP address that has been set cannot be checked • Check that the LAN adapter and the host computer using the adapter configuration are connected to the same network. • Check that the LAN adapter is powered on. 2. The HDI will not start. • If the LAN adapter and the emulator are not both powered-on, a time out error will occur after one minute. • Check that the IP address, subnet mask, and default gateway in the LAN adapter are correctly set. Refer to on-line help for the LAN adapter configuration for details on the adapter settings. • After setting the IP address in the LAN adapter, power off the adapter and power it on again. 3. The HDI stops operating. • Check that the LAN adapter and emulator are correctly connected. • Check that the LAN adapter and emulator are powered on. The LAN adapter has diagnostic LEDs' as shown in figure 12. If these problems are not resolved by taking the specified corrective action, contact the Hitachi sales agency. Be prepared to advise the agency of the status of these LEDs. HS6000ELN01H LED 1 2 LED 1 3 4 2 Figure 12 Diagnostic LED 14 3 4 Section 6 Environmental Conditions CAUTION Observe the conditions listed in table 4 when using the LAN adapter. Failure to do so will damage the LAN adapter, the emulator product, and the user system. Table 4 Environmental Conditions No. Item Specification 1 Temperature Operating: +10°C to +35°C Storage: -10°C to +50°C 2 Humidity Operating: 35% RH to 80% RH, no condensation Storage: 35% RH to 80% RH, no condensation 3 Vibration Operating: 2.45m/S max. 2 Storage: 4.9m/S max. 2 Transportation: 14.7m/S max. 4 AC powersupply Voltage: AC 100-240 V Current: 61-70 VA Frequency: 50/60 Hz 5 Ambient gases There must be no corrosive gasses present. 2 15 Section 7 External Dimensions of the LAN Adapter 126.1 0.5 HITACHI LAN PC I/F Speed Col Tx Rx Link Full 81.5 HS6000ELN01H 27.5 DC IN – POWER + Unit: mm Tolerance: ±1.0mm 16