1 FSF BEAB 5 x 20mm Quick-acting Fuses – Low Breaking Capacity F Built according to IEC 127-2/2, EN 60127, ASE 1064, DIN/VDE 0820 part 1, DIN 41661, BS 4265, and SEMKO 104-1976. Series SP & SPT recommended if the short circuit current through the fuselink is more than 35A or 10 x l n, whichever is greater (CENELEC Jan 1, 1993). 125 mA - 10 A 32 - 100 mA Approvals: UL recognition 32mA-10A* CSA acceptance 32mA-10A* VDE approval 32mA-6.3A SEMKO approval 32mA-6.3A SEV approval 32mA-6.3A BEAB approval 32mA-6.3A * fuses with pigtail leads approved up to 8A 2 - 14 mA 1000 100 File #E41599 File #LR51172 File #50911 File numbers on request 10 Time Current Characteristics 1 n • In 1.5 • In 2.1 • In 2.75 • In min. max. 2mA – 14mA ~ 30 min. ~ 10min.* 32mA – 100mA 60 min. 30 min. 10 ms 500 ms 125mA – 10A 60 min. 30 min. 50 ms 2s 4 • In 10 • In rated current In Fusing time in seconds ts 0,1 min. max. min. max. max. ~ 3 ms ~ 0.3 ms 3 ms 100 ms 20 ms 10 ms 300 ms 20 ms = 10 min. ~ 50 ms 0,01 0,001 1 2 3 4 5 6 * This value is not guaranteed for DC 8 10 Spool Multiple of rated current In With pigtail leads Tape A~ 2 mA* / 250V 4 mA* / 250V 7 mA* / 250V 10 mA* / 250V 14 mA* / 250V 32 mA / 250V 40 mA / 250V 50 mA / 250V 63 mA / 250V 80 mA / 250V 100 mA / 250V 125 mA / 250V 160 mA / 250V 200 mA / 250V 250 mA / 250V 315 mA / 250V 400 mA / 250V 500 mA / 250V 630 mA / 250V 800 mA / 250V 1 A / 250V 1.25 A / 250V 1.6 A / 250V 2 A / 250V 2.5 A / 250V 3.15 A / 250V 4 A / 250V 5 A / 250V 6.3 A / 250V 8 A* / 250V 10 A* / 250V 35A / 250 V / 50 Hz / p.f. 1 10 • In 250V / 50 Hz / p.f. 1 10000 8000 7000 5000 4000 3500 2000 2000 1700 1400 1300 1200 1000 650 240 200 200 190 170 170 150 130 130 130 1600 540 640 500 380 9300 7400 6400 940 750 840 610 550 540 240 210 200 150 140 110 110 100 100 90 90 90 90 80 80 80 70 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 2.5 2.5 2.5 2.5 0.01 0.01 0.01 0.01 0.01 0.7 0.7 0.7 0.3 0.3 0.4 0.4 0.5 0.5 0.2 0.2 0.2 0.2 0.3 0.3 0.3 0.4 0.5 0.6 0.8 0.6 1.0 1.3 2.0 2.3 2.5 Operating I 2t Approvals A2 s BEAB mA / A / V~ 0034.1501 0034.1502 0034.1503 0034.1504 0034.1505 0034.1527 0034.1528 0034.1529 0034.1530 0034.1531 0034.1506 0034.1507 0034.1508 0034.1509 0034.1510 0034.1511 0034.1512 0034.1513 0034.1514 0034.1515 0034.1516 0034.1517 0034.1518 0034.1519 0034.1520 0034.1521 0034.1522 0034.1523 0034.1524 0034.1525 0034.1526 Power dissipation at 1.5 • In max. typical IEC 127 Schurter Watts Watts SEV Series FSF Voltage drop at In max. typical Schurter IEC 127 mV mV SEMKO Breaking capacity VDE Rated current / rated voltage CSA Order Numbers UL according to IEC 286-1 • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 0.000009 0.00001 0.00002 0.00002 0.00003 0.00006 0.00013 0.00024 0.00054 0.0016 0.0023 0.0067 0.018 0.03 0.021 0.044 0.088 0.15 0.37 5.3 5.1 5.6 6.5 7.6 9.8 20 29 38 62 103 184 *Not addressed in the standards For pigtail fuses packaged loose: reference .PT after part number (e.g. 0034.1501.PT) For pigtail fuses on 1,000-piece tape and reel: reference .TR after part number (e.g. 0034.1501.TR) 146 Schurter, Inc. • Phone 707-778-6311 • Fax 707-778-6401 • E-mail [email protected] • Website http://www.schurterinc.com FSM 5 x 20mm Medium Time Lag Fuses – Low and Medium Breaking Capacity Built according to DIN 41571, data sheet 2 (June 1984) M 1,6 - 10 A 315 mA - 1,25 A 1000 Glass tube 0034.2511 – .2517 100 Ceramic tube Sand filled 10 0034.2518 – .2527 Fuse with pigtail leads 1 s Time Current Characteristics n • In Fusing time in seconds ts 0,1 1.5 • In 2.1 • In 4 • In 10 • In min. max. min. max. min. max. 315mA – 1.25A 60 min. 10 min. 40 ms 2s 5 ms 90 ms 1.6A – 10A 60 min. 30 min. 40 ms 2s 5 ms 90 ms rated current In 0,01 0,001 1 Vi lf h 2 d 3 N Multiple of rated current In 4 5 6 t I 8 10 15 Spool With pigtail leads Tape according to IEC 286-1 Order Numbers Rated current / rated voltage Breaking capacity Voltage drop at In Power dissipation at 1.5 • In Operating I 2 t Series FSM mA /A / V~ C, E, D p.f. 1 G p.f. 0.7-0.8 A~ max. DIN 41571 mV typical Schurter mV max. Schurter Watts typical Schurter Watts A 2s 0034.2511 0034.2512 0034.2513 0034.2514 0034.2515 0034.2516 0034.2517 0034.2518 0034.2519 0034.2520 0034.2521 0034.2522 0034.2523 0034.2524 0034.2525 0034.2526 315 mA / 250V 400 mA / 250V 500 mA / 250V 630 mA / 250V 800 mA / 250V 1 A / 250V 1.25 A / 250V 1.6 A / 250V 2 A / 250V 2.5 A / 250V 3.15 A / 250V 4 A / 250V 5 A / 250V 6.3 A / 250V 8 A / 250V 10 A / 250V 250 230 210 190 170 160 160 160 160 160 160 160 150 140 140 120 200 160 140 140 130 70 70 150 140 130 120 120 100 100 90 80 0.4 0.4 0.4 0.4 0.4 0.4 0.6 0.8 0.9 1.0 1.2 1.5 1.7 2.0 2.6 2.8 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.6 0.7 0.8 1.0 1.3 1.4 1.7 2.3 2.3 0.33 0.41 1.5 12 11 15 23 3.5 5.0 13 21 37 95 165 240 455 0034.2527 10 120 80 2.8 2.5 255 A* / 250V 80A / 125V80A / 250V~ C C 1000A / 125V- E E 1000A / 250V~ E E 300A / 125V300A / 250V~ D D 1500A / 250V~ G G *Not mentioned in DIN 41571. Check temperature rise if fuses are used in closed type fuseholders. For pigtail fuses packaged loose: reference .PT after part number (e.g. 0034.2511.PT) For pigtail fuses on 1,000-piece tape and reel: reference .TR after part number (e.g. 0034.2511.TR) Schurter, Inc. • Phone 707-778-6311 • Fax 707-778-6401 • E-mail [email protected] • Website http://www.schurterinc.com 147 FST BEAB 5 x 20mm Time Lag Fuses – Low Breaking Capacity Built according to IEC 127-2/3, EN 60127, SEV 1064, DIN/VDE 0820 part 1, DIN 41662, BS 4265, and SEMKO 104-1976, with support by UL 198G. Series SP & SPT recommended if the short circuit current through the fuse- link is more than 35A or 10 x In , whichever is greater (CENELEC Jan 1, 1993). Approvals: UL recognition 32mA-16A* File #E41599 CSA acceptance 32mA-16A* File #LR51172 VDE approval 32mA-6.3A File #50910 SEMKO approval 32mA-6.3A File #51550 SEV approval 32mA-6.3A File BSI license 125mA-6.3A numbers CB certification 32-40mA, 125mA-6.3A on request BEAB approval 32-40mA, 125mA-6.3A * fuses with pigtail leads approved up to 8A (factory assembled only) Fusing time in seconds ts NEW New version with gold plated caps for direct pcb mounting cUL recognition 1A-16A/250V** pending VDE approval 1A-16A/250V** pending ** Contact Schurter for part numbers Time Current Characteristics n • In 1.5 • In 2.1 • In 2.75 • In 4 • In 10 • In min. max. min. max. min. max. min. max. 20mA – 100mA 60 min. 2 min.* 200 ms* 10 s* 40 ms 3s 10 ms 300 ms 125mA – 20A 60 min. 2 min. 600 ms 10 s 150 ms 3s 20 ms 300 ms SEV rated current In * These values are not guaranteed at 20mA Multiple of rated current In Spool With pigtail leads Tape max. IEC 127 Watts 35A / 250 V / 50 Hz / p.f. 1 10 • In 250V / 50 Hz / p.f. 1 5000 4000 3500 3000 3000 2500 2000 1900 1500 1300 1100 1000 900 300 250 150 150 150 150 120 100 100 100 100 typical Schurter mV 2700 3000 2100 950 1300 1100 1000 565 415 270 210 170 150 160 160 120 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 max. Schurter Watts 0.4 0.5 0.5 0.6 0.7 0.8 1.1 1.2 1.3 1.6 1.8 typical Schurter Watts 0.1 0.2 0.2 0.125 0.2 0.3 0.155 0.2 0.185 0.2 0.2 0.2 0.2 0.2 0.3 0.3 0.2 0.3 0.3 0.3 0.3 0.4 0.5 0.8 0.9 1.0 1.3 1.3 2.5 3.3 4.2 A 2s 0.0012 0.0019 0.0027 0.0363 0.0401 0.0570 0.107 0.064 0.230 0.256 0.238 0.544 0.768 3.0 4.35 3.85 3.30 5.50 7.45 10.5 16 21.9 47 68.3 102 190 275 520 750 1638 3057 Approvals • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • BEAB A~ max. IEC 127 mV Pre-arcing I 2 t at 10 • ln CB Power dissipation at 1.5 • In BSI Voltage drop at In VDE mA / A / V~ 20 mA*/ 250V 32 mA / 250V 40 mA / 250V 50 mA / 250V 63 mA / 250V 80 mA / 250V 100 mA / 250V 125 mA / 250V 160 mA / 250V 200 mA / 250V 250 mA / 250V 315 mA / 250V 400 mA / 250V 500 mA / 250V 630 mA / 250V 800 mA / 250V 1 A / 250V 1.25 A / 250V 1.4 A*/ 250V 1.6 A / 250V 2 A / 250V 2.5 A / 250V 3.15 A / 250V 4 A / 250V 5 A / 250V 6.3 A / 250V 8 A* / 250V 10 A* / 250V 12.5 A* / 250V 16 A* / 250V 20 A* / 250V Breaking capacity CSA Series FST 0034.3101 0034.3102 0034.3103 0034.3104 0034.3105 0034.3106 0034.3107 0034.3108 0034.3109 0034.3110 0034.3111 0034.3112 0034.3113 0034.3114 0034.3115 0034.3116 0034.3117 0034.3118 0034.3165* 0034.3119 0034.3120 0034.3121 0034.3122 0034.3123 0034.3124 0034.3125 0034.3126 0034.3127 0034.3128 0034.3129 0034.3130 Rated current / rated voltage UL Order Numbers SEMKO according to IEC 286-1 • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • *Not addressed in the standards; 1.4A SEMKO approved only. For pigtail fuses packaged loose: reference .PT after part number (e.g. 0034.3101.PT) For pigtail fuses on 1,000-piece tape and reel: reference .TR after part number (e.g. 0034.3101.TR) Schurter, Inc. • Phone 707-778-6311 • Fax 707-778-6401 • E-mail [email protected] • Website http://www.schurterinc.com 149 FTT 5 x 20mm Super Time Lag Fuses – Low Breaking Capacity TT Approvals: UL recognition 63 mA - 100 mA 63mA-4A/250V File #E41599 125 mA - 4 A 1000 100 Fuse with pigtail leads (factory assembled only) NEW 10 cUL New version with gold plated caps for direct pcb mounting recognition 50mA-4A/250V** pending ** Contact Schurter for part numbers 1 Fusing time in seconds ts Time Current Characteristics n • In 0,1 1.5 • In 2.1 • In min. max. 2.75 • In 4 • In 10 • In rated current In min. max. min. max. min. max. 0,01 0,001 1 2 3 4 5 6 63mA – 100mA 60 min. 30 min. 3s 100 s 800 ms 20 s 0.06 s 1s 125mA – 4A 60 min. 30 min. 5s 200 s 1.5 s 40 s 0.15 s 3s 8 10 Multiple of rated current In Spool With pigtail leads Tape according to IEC 286-1 Order Numbers Rated current / rated voltage Breaking capacity Voltage drop at In Power dissipation at 1.5 • In Operating I 2 t Series FTT mA / A / V~ A~ max. Schurter mV typical Schurter mV max. Schurter Watts typical Schurter Watts A2 s 0034.5001 0034.5002 0034.5003 0034.5004 0034.5035 0034.5036 0034.5037 0034.5038 0034.5039 0034.5040 0034.5041 0034.5042 0034.5043 0034.5044 0034.5045 0034.5046 0034.5047 0034.5048 0034.5049 63 mA / 250V 80 mA / 250V 100 mA / 250V 125 mA / 250V 160 mA / 250V 200 mA / 250V 250 mA / 250V 315 mA / 250V 400 mA / 250V 500 mA / 250V 630 mA / 250V 800 mA / 250V 1 A / 250V 1.25 A / 250V 1.6 A / 250V 2 A / 250V 2.5 A / 250V 3.15 A / 250V 4 A / 250V 35A / 250 V / 50 Hz / p.f. 1 5000 4500 4000 3000 2000 1500 1200 1000 1200 800 700 500 250 200 200 200 150 100 100 1000 980 870 500 450 400 330 300 225 250 200 160 150 130 100 100 90 90 80 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 0.22 0.27 0.30 0.27 0.30 0.33 0.35 0.36 0.40 0.44 0.47 0.54 0.54 0.57 0.65 0.80 0.85 1.0 1.15 2.4 2.5 2.8 2.2 3.7 3.7 3.7 4.2 5.6 8.0 9.0 18 20 31 71 113 230 405 476 For pigtail fuses packaged loose: reference .PT after part number (e.g. 0034.5001.PT) For pigtail fuses on 1,000-piece tape and reel: reference .TR after part number (e.g. 0034.5001.TR) 150 Schurter, Inc. • Phone 707-778-6311 • Fax 707-778-6401 • E-mail [email protected] • Website http://www.schurterinc.com FSQ 100'000 5 x 20mm Quick-acting Fuses 123456 123456 123456 F ® Built according to UL 248.14 and CSA 22.2 (recommended over 1 /4 x 11 /4" fuses for domestic use in UL/CSA approved fuseholders and/or power entry modules where space is a limiting factor). 2248.14 UL 123456 198 G test value Istwert Approvals: UL listing 400mA-3.5A CSA certification 400mA-3.5A 10'000 File #E41599 File #LR51172 1'000 Replaces Series FNB 100 10 1 Fusing time ininseconds ts t s Schmelzzeit Sekunden Time Current Characteristics n • In 0,1 1.1 • In 1.35 • In 2 • ln min. max. max. 4h 1 hr 2 min. rated current In 0,01 400mA – 3.5A 0,001 3 1 2 4 Multiple of rated current In 5 6 7 8 9 10 15 Spool With pigtail leads Tape according to IEC 286-1 Order Numbers Rated current / rated voltage Breaking capacity Voltage drop at In Power dissipation at 1.1 • In 2 I2 t Operating Approvals Series FSQ mA / A / V A~ typical mV max. Watts A2s UL CSA 0034.3951 0034.3952 0034.3953 0034.3954 0034.3955 0034.3956 0034.3957 400 mA / 250V 500 mA / 250V 600 mA / 250V 700 mA / 250V 750 mA / 250V 800 mA / 250V 1 A / 250V 170 140 150 150 150 140 120 0.1 0.1 0.1 0.2 0.2 0.2 0.2 0.1 0.2 0.26 0.4 0.6 0.7 1.2 • • • • • • • • • • • • • • 0034.3958 0034.3959 0034.3960 0034.3961 0034.3962 0034.3963 0034.3964 0034.3965 0034.3966 0034.3967 0034.3968 0034.3969 1.2 1.25 1.5 1.6 1.8 2 2.25 2.5 2.8 3 3.2 3.5 110 110 110 110 100 100 100 100 100 100 100 90 0.2 0.2 0.3 0.3 0.3 0.3 0.3 0.4 0.5 0.5 0.5 0.5 1.8 1.8 3 3.8 4.0 4.5 6.8 11 13 15 20 26 • • • • • • • • • • • • • • • • • • • • • • • • A / 250V A / 250V A / 250V A / 250V A / 250V A / 250V A / 250V A / 250V A / 250V A / 250V A / 250V A / 250V 10,000A / 125V p.f. 0.7 – 0.8 35A / 250V p.f. 0.7 – 0.8 10,000A / 125V p.f. 0.7 – 0.8 100A / 250V p.f. 0.7 – 0.8 For pigtail fuses packaged loose: reference .PT after part number (e.g. 0034.3951.PT) For pigtail fuses on 1,000-piece tape and reel: reference .TR after part number (e.g. 0034.3951.TR) Schurter, Inc. • Phone 707-778-6311 • Fax 707-778-6401 • E-mail [email protected] • Website http://www.schurterinc.com 151 1 FSD 100'000 5 x 20mm Time Delay Fuses T ® 123456 123456 Built according to UL 248.14 (formerly 198G) and CSA C22.2 (formerly 59.2-M). Recommended over 1 /4 x 11 /4" fuses for domestic use in UL/CSA approved fuseholders and/or power entry modules where space is a limiting factor. Approvals: UL listing 100mA-2A File #E41599 CSA certification 100mA-2A File #LR51172 248.14 UL123456 198 G 100 mA - 3(test A (Istwert) 80mA - 3A value) 3,2 - 3,5 A 10'000 Replaces Series FSP 1'000 100 10 1 Fusing time in seconds t Schmelzzeit in Sekundens t s Time Current Characteristics n • In 0,1 1.1 • In 1.35 • In 2 • In rated current In 0,01 100mA – 2A min. max. min. max. 4h 1h 5s 2 min. 0,001 3 1 2 4 Multiple of rated current In 5 6 7 8 9 10 15 Spool With pigtail leads Tape according to IEC 286-1 2 Order Numbers Rated current / rated voltage Breaking capacity Voltage drop at In Power dissipation at 1.1 • In Operating I t Approvals Series FSD mA / A / V A~ max. mV max. Watts A 2s UL CSA 0034.3972 0034.3973 0034.3974 0034.3975 0034.3976 0034.3977 0034.3978 0034.3979 0034.3980 0034.3981 0034.3982 0034.3983 0034.3984 0034.3985 0034.3986 0034.3987 100 mA / 250V 125 mA / 250V 150 mA / 250V 175 mA / 250V 187 mA / 250V 200 mA / 250V 250 mA / 250V 300 mA / 250V 375 mA / 250V 400 mA / 250V 500 mA / 250V 600 mA / 250V 700 mA / 250V 750 mA / 250V 800 mA / 250V 1 A / 250V 1550 1240 1240 1000 910 890 770 700 510 540 470 380 360 270 330 270 0.16 0.15 0.19 0.18 0.17 0.18 0.19 0.21 0.19 0.21 0.23 0.23 0.25 0.21 0.26 0.27 3.5 3.9 5.0 4.1 5.7 5.3 5.1 5.2 5.8 5.2 5.4 7.0 8.3 9.3 9.4 11 • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 0034.3988 0034.3989 0034.3990 0034.3991 0034.3992 0034.3993 1.2 1.25 1.5 1.6 1.8 2 240 240 210 200 190 180 0.80 0.31 0.32 0.32 0.34 0.37 37 41 45 57 52 62 • • • • • • • • • • • • A / 250V A / 250V A / 250V A / 250V A / 250V A / 250V 10,000A / 125V p.f. 0.7 – 0.8 35A / 250V p.f. 0.7 – 0.8 10,000A / 125V p.f. 0.7 – 0.8 100A / 250V p.f. 0.7 – 0.8 For pigtail fuses packaged loose: reference .PT after part number (e.g. 0034.3972.PT) For pigtail fuses on 1,000-piece tape and reel: reference .TR after part number (e.g. 0034.3972.TR) 152 Schurter, Inc. • Phone 707-778-6311 • Fax 707-778-6401 • E-mail [email protected] • Website http://www.schurterinc.com