05015 VSIP® SERIES A & B . . . engineered solutions for the transient environment™ VSIP® TVS DIODE ARRAY APPLICATIONS ✔ RS-232 and RS-423 Data Lines ✔ Telecommunications T/R Protection: ISDN, ADSL, V.34/V90, HDLC, T1/E1 and T3/E3 ✔ Low and High Speed Data Lines: Ethernet, Token Ring, USB, and Fire Wire ✔ I/O Port Protection IEC COMPATIBILITY (EN61000-4) VSIP® PACKAGE ✔ 61000-4-2 (ESD): Air - 15kV, Contact - 8kV ✔ 61000-4-4 (EFT): 40A - 5/50ns ✔ 61000-4-5 (Surge): 24A, 8/20µs - Level 2(Line-Gnd) & Level 3(Line-Line) FEATURES ✔ Series A: 800 Watts Peak Pulse Power per Line (tp = 8/20 µs) ✔ Series B: 3,400 Watts Peak Pulse Power per Line (tp = 8/20 µs) ✔ ESD Protection > 40 kilovolts ✔ Protection for 8 to 9 Bidirectional Data Lines ✔ High Surge Capability & Low Capacitance Option ✔ Available in 5 Voltage Types Ranging from 5.0V to 24V MECHANICAL CHARACTERISTICS ✔ Molded Plastic Package ✔ Weight 1.5 grams (Approximate) ✔ Flammability Rating UL 94V-0 ✔ Device Marking: Part Number, Logo & Pin 1 Indicated By DOT on Package CIRCUIT DIAGRAMS UNIDIRECTIONAL 05015.R3 1/03 BIDIRECTIONAL LOW CAPACITANCE 1 ISOLATED LOW CAPACITANCE www.protekdevices.com VSIP® SERIES A & B DEVICE CHARACTERISTICS MAXIMUM RATINGS @ 25°C Unless Otherwise Specified SYMBOL VALUE UNITS Series A Peak Pulse Power (tp = 8/20µs) - See Figure 1 PPP 800 Watts Series B Peak Pulse Power (tp = 8/20µs) - See Figure 1 PPP 3400 Watts Operating Temperature TJ -55°C to 150°C °C TSTG -55°C to 150°C °C PARAMETER Storage Temperature ELECTRICAL CHARACTERISTICS PER LINE @ 25°C Unless Otherwise Specified SERIES A RATED MINIMUM STAND-OFF BREAKDOWN VOLTAGE VOLTAGE (See Notes 1-3) MAXIMUM CLAMPING VOLTAGE (See Fig. 2) SERIES B MAXIMUM MAXIMUM CLAMPING LEAKAGE VOLTAGE CURRENT (See Fig. 2) MAXIMUM PEAK PULSE CURRENT (See Fig. 2) MAXIMUM CLAMPING VOLTAGE (See Fig. 2) MAXIMUM CLAMPING VOLTAGE (See Fig. 2) MAXIMUM LEAKAGE CURRENT MAXIMUM PEAK PULSE CURRENT (See Fig. 2) VWM VOLTS @ 1mA V(BR) VOLTS @ IP = 1A VC VOLTS @ IP = 10A VC VOLTS @VWM ID AMPS IPP AMPS @ IP = 1A VC VOLTS @ IP = 10A VC VOLTS @VWM ID AMPS IPP AMPS 5.0 8.0 12.0 15.0 24.0 6.0 8.5 13.3 16.7 26.7 9.8 13.4 19.5 24.4 39.1 12.5 16.6 22.7 28.5 45.6 100 10 1 1 1 45 40 34 27 22 8.6 10.9 17.0 21.4 34.2 9.1 12.0 18.8 23.6 37.8 300 200 2 2 2 300 258 184 147 93 Note 1: Note 2: Note 3: For voltage types not shown on the product data sheet, consult the factory. The low capacitance configuration values for each bidirectional line pair is as follows: Series “A” C = 25pF Series “B” C = 100pF Forward voltage (unidirectional configurations only): Series “B”: VF = 1.5V 200mA Series “A”: VF = 1.5V @ 200mA STANDARD PRODUCT ORDERING BY PART NUMBER Unidirectional - VS10Pxx (A Series), VSBP10Pxx (B Series) Bidirectional - VS10PxxC (A Series), VSBP10PxxC(B Series) Low Capacitance - VS10PxxLC(A Series), VSBP10PxxLC (B Series) Isolated Low Capacitance- VS10PxxLCI (A Series), VSBP10PxxLCI (B Series) xx = Selected Voltage 05015.R3 1/03 2 www.protekdevices.com VSIP® SERIES A & B GRAPHS FIGURE 1 PEAK PULSE POWER VS PULSE TIME PPP - Peak Pulse Power - Watts 100,000 10,000 3,400W, 8/20µs Waveform 1,000 800W, 8/20µs Waveform 100 0.01 1 10 100 td - Pulse Duration - µs 10,000 FIGURE 2 PULSE WAVE FORM 120 IPP - Peak Pulse Current - % of IPP 1,000 tf 100 TEST WAVEFORM PARAMETERS tf = 8µs td = 20µs Peak Value IPP 80 e-t 60 40 td = t IPP/2 20 0 0 10 15 t - Time - µs 20 FIGURE 3 POWER DERATING CURVE 100 25 30 FIGURE 4 TYPICAL LOW CAPACITANCE CURVE 1000 C - TVS Capacitance - pF Peak Pulse Power 8/20µs 80 % Of Rated Power 5 60 40 20 Average Power 0 0 25 50 75 100 125 TL - Lead Temperature - °C Industry Standard Low Capacitance TVS Protector 100 Low Capacitance VS10PXXLC 150 10 0 05015.R3 1/03 3 1 2 3 4 V(OP) - Circuit Opeerating - Volts 5 www.protekdevices.com VSIP® SERIES A & B PACKAGE OUTLINE & DIMENSIONS PACKAGE OUTLINE VSIP PACKAGE I K J L H VSIP DIMENSIONS D B C DIM A B C D E F G H I J K L E A F MILLIMETERS MIN MAX 25.81 6.25 5.92 0.406 1.47 2.49 0.38 3.20 7° TYP 1.47 0.20 1.47 26.01 6.45 6.02 0.508 1.57 2.59 1.02 3.40 7° TYP 1.57 0.30 1.57 INCHES MIN MAX 1.016 0.246 0.233 0.016 0.058 0.098 0.015 0.126 7° TYP 0.058 0.008 0.058 1.024 0.254 0.237 0.020 0.062 0.102 0.040 0.134 7° TYP 0.062 0.012 0.062 NOTES: 1. Dimensions are exclusive of mold flash and metal burrs. G 06016 Rev 1 - 11/01 PACKAGING: Product Shipped in Tubes of 18 pcs per Tube ProTek Devices 2929 South Fair Lane, Tempe, AZ 85282 Tel: 602-431-8101 Fax: 602-431-2288 E-Mail: [email protected] Web Site: www.protekdevices.com COPYRIGHT © ProTek Devices 2003 SPECIFICATIONS: ProTek reserves the right to change the electrical and or mechanical characteristics described herein without notice (except JEDEC). DESIGN CHANGES: ProTek reserves the right to discontinue product lines without notice, and that the final judgement concerning selection and specifications is the buyer’s and that in furnishing engineering and technical assistance, ProTek assumes no responsibility with respect to the selection or specifications of such products. 05015.R3 1/03 4 www.protekdevices.com