ALUMINUM ELECTROLYTIC CAPACITORS UG Chip Type, Higher Capacitance Range series Chip Type , higher capacitance in larger case sizes (φ12.5,φ16,φ18,φ20) Designed for surface mounting on high density PC board. Applicable to automatic mounting machine using carrier tape and tray. UJ High Temperature UG Specifications Item Performance Characteristics Category Temperature Range Rated Voltage Range Rated Capacitance Range Capacitance Tolerance —40 ~ +85°C 6.3 ~ 450V 4.7 ~ 10000µF ±20% at 120Hz, 20°C Rated voltage(V) Leakage Current — Rated voltage(V) tan δ (MAX) tan δ 6.3 ~ 100 160 ~ 450 After 1 minutes' application of rated voltage, leakage current is not more than 0.03CV or 4(µA), whichever is greater. I =0.04CV+100 ( µA)max.(1 minute's) 160 ~ 250 400 • 450 120Hz 6.3 10 16 25 35 50 63 100 0.28 0.24 0.20 0.16 0.14 0.12 0.10 0.08 0.20 0.25 20°C For capacitance of more than 1000µF, add 0.02 for every increase of 1000µF. 6.3 10 16 25 35 50 63 100 160 ~ 250 400 • 450 Stability at Low Temperature Impedance ratio Z—25°C/Z+20°C 5 4 3 2 2 2 2 2 3 6 ZT/Z20(MAX.) Z—40°C/Z+20°C 12 10 8 5 4 3 3 3 6 10 Rated voltage(V) Initial specified value or less Leakage current Capacitance change tan δ After 2000 hours' application of rated voltage at 85°C, capacitors meet the Endurance characteristics requirements listed at right. 120Hz Within ±20% of initial value 200% or less of initial specified value After leaving capacitors under no load at 85°C for 1000 hours, they meet the specified Shelf Life value for endurance characteristics listed above. Black print on the case top. Marking Type numbering system (Example : 50V 330µF) Chip Type B±0.2 Plastic platform A±0.2 Voltage Trade mark Lot No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 U U G 1 H 3 3 1 M NR 1 Capacitance Pressure relief vent L±0.5 C±0.2 Capacitance Tolerance (±20%) H±0.1 V (µF) Code Cap. 221 331 471 102 222 332 472 682 103 220 330 470 1000 2200 3300 4700 6800 10000 V (µF) Cap. Code 4.7 10 22 33 47 68 100 220 330 470 4R7 100 220 330 470 680 101 221 331 471 Rated Capacitance (330µF) φD 12.5 16. 18. 20. 4.0 4.5 5.0 5.0 A B 13.6 17.1 19.1 21.1 C 16.0 19.5 21.5 23.5 8.0 10.5 11.5 13.5 E H 2.5 3.75 3.75 3.75 Dimensions 6.3 0J 12.5 × 16.0 16 × 16.5 16 × 16.5 18 × 16.5 10 1A 890 1200 1400 1650 2000 63 1J 12.5 × 13.5 12.6 × 16.0 16 × 16.5 620 960 1300 1500 1850 2200 100 2A 370 580 680 850 12.5 × 13.5 12.5 × 16.0 18 × 16.5 18 × 21.5 Rated voltage (50V) 12.5 × 13.5 16 × 16.5 18 × 16.5 18 × 21.5 12.5 × 16.0 16 × 16.5 18 × 16.5 Code NR 20 RR D × L (mm) 35 1V 12.5 × 13.5 12.5 × 16.0 18 × 16.5 18 × 21.5 710 1150 1450 1750 200 2D 370 500 590 φD 12.5 ~ 18 Type 25 1E 160 2C 350 440 665 825 ZD Series name 16 1C 12.5 × 13.5 12.5 × 16.0 16 × 16.5 18 × 16.5 18 × 21.5 MS Tray Configuration A±0.2 Series E B±0.2 φD±0.5 nichicon 330 µF UG 50V H9736 Package code Taping 12.5 × 13.5 12.5 × 16.0 16 × 16.5 18 × 16.5 18 × 21.5 12.5 × 13.5 16 × 16.5 18 × 21.5 550 820 1350 1700 250 2E 235 310 415 505 590 12.5 × 13.5 12.5 × 13.5 16 × 16.5 18 × 21.5 580 1000 1550 400 2G 12.5 × 13.5 12.5 × 16.0 16 × 16.5 18 × 16.5 18 × 21.5 Size φ12.5 × 21 is available for capacitors marked, " ". Size φ16 × 21.5L is available for capacitors marked, " ". Size φ20 × 16.5L is available for capacitors marks, " In this case, 6 will be put at 12th digit of type numbering system. 50 1H 150 240 340 415 490 ". 12.5 × 13.5 16 × 16.5 18 × 16.5 18 × 21.5 20 × 21.5 450 520 740 1150 450 2W 115 140 280 350 430 12.5 × 13.5 16 × 16.5 16 × 21.5 18 × 21.5 115 140 275 345 Case size Rated Ripple Rated Ripple (mA rms) at 85°C 120Hz Frequency coefficient of rated ripple current V 6.3 ~ 100 160 ~ 450 Cap.(µF) Frequency 0 ~ 68 100 ~ 4700 1000 ~ 10000 4.7 ~ 100 50Hz 0.75 0.80 0.85 0.80 120Hz 1.00 1.00 1.00 1.00 300Hz 1.35 1.23 1.10 1.25 1kHz 1.57 1.34 1.13 1.40 10kHz ~ 2.00 1.50 1.15 1.60 Taping Specifications are given in page 21. Please refer to page 3 for the minimum order quantity. CAT.8100P