PD - 93867 IRGC25B120UB Die in Wafer Form Features • • • • • G Benefits • • • • 1200V IC(nom)=25A VCE(on) typ.=3.37V @ IC(nom) @ 25°C UltraFast IGBT Short Circuit Rated 150mm Wafer C GEN5 Non Punch Through (NPT) Technology UltraFast 10µ s Short Circuit Capability Square RBSOA Positive VCE(on) Temperature Coefficient Benchmark Efficiency above 20KHz Optimized for Welding, UPS, and Induction Heating Rugged with UltraFast Performance Excellent Current Sharing in Parallel Operation E Electrical Characteristics (Wafer Form) Parameter VCE (on) V(BR)CES VGE(th) ICES IGES Description Guaranteed (min, max) Collector-to-Emitter Saturation Voltage 2.3V min, 2.7V max Colletor-to-Emitter Breakdown Voltage 1200V min Gate Threshold Voltage 4.4V min, 6.0V max Zero Gate Voltage Collector Current 10µA max Gate-to-Emitter Leakage Current ± 1.1µA max Test Conditions I C = 10A, TJ = 25°C, VGE = 15V T J = 25°C, ICES = 250µA, VGE = 0V VGE = VCE , TJ =25°C, IC = 250µA T J = 25°C, VCE = 1200V TJ = 25°C, V GE = +/-20V Mechanical Data Nominal Backmetal Composition, (Thickness) Nominal Front Metal Composition, (Thickness) Dimensions Wafer Diameter Wafer Thickness, Tolerance Relevant Die Mechanical Dwg. Number Minimum Street Width Reject Ink Dot Size Ink Dot Location Recommended Storage Environment Al - Ti - Ni/V - Ag, (1kA - 1kA - 4kA - 6kA) 99% Al/1% Si, (4µm) 0.257" x 0.260" 150mm, with std. < 100 > flat 185µm, +/-15µm 01-5376 100µm 0.25mm diameter minimum Consistent throughout same wafer lot Store in original container, in dessicated nitrogen, with no contamination For optimum electrical results, die attach temperature should not exceed 300°C Recommended Die Attach Conditions Die Outline NOTES: 6.53 [.257] 1. ALL DIMENS IONS ARE SHOWN IN MILLIMET ERS [INCHES ]. 5.104 [.201] 2. CONT ROLLING DIMENS ION: [INCH]. 3. LET TER DES IGNAT ION: S = SOURCE S K = S OURCE KELVIN G = GAT E IS = CURRENT S ENS E E = EMIT T ER 4. DIMENSIONAL T OLERANCES : 5.125 [.202] EMITTER 6.60 [.260] BONDING PADS : WIDT H & LENGT H G 0.961 [.038] www.irf.com 1.006 [.039] 01-5376 < 0.635 TOLERANCE = + /- 0.013 < [.0250] TOLERANCE = + /- [.0005] > 0.635 TOLERANCE = + /- 0.025 > [.0250] TOLERANCE = + /- [.0010] OVERALL DIE: < 1.270 TOLERANCE = + /- 0.102 WIDT H < [.050] T OLERANCE = + /- [.004] & > 1.270 TOLERANCE = + /- 0.203 LENGT H > [.050] T OLERANCE = + /- [.008] 2/14/2000