PD - 93870 IRGC50B120KB Die in Wafer Form Features • • • • • 1200V IC(nom)= 50A VCE(on) typ.=2.15V @ IC(nom) @ 25°C Motor Control IGBT Short Circuit Rated 150mm Wafer C GEN5 Non Punch Through (NPT) Technology Low VCE(on) 10µs Short Circuit Capability Square RBSOA Positive VCE(on) Temperature Coefficient G Benefits • Benchmark Efficiency for Motor Control Applications • Rugged Transient Performance • Excellent Current Sharing in Parallel Operation E Electrical Characteristics (Wafer Form) Parameter VCE (on) V(BR)CES VGE(th) ICES IGES Description Guaranteed (min, max) Collector-to-Emitter Saturation Voltage 1.3V min, 1.53V max Colletor-to-Emitter Breakdown Voltage 1200V min Gate Threshold Voltage 4.4V min, 6.0V max Zero Gate Voltage Collector Current 20µA max Gate-to-Emitter Leakage Current ± 1.1µA max Test Conditions I C = 10A, TJ = 25°C, VGE = 15V T J = 25°C, ICES = 500µA, VGE = 0V VGE = VCE , TJ =25°C, IC = 500µA T J = 25°C, VCE = 1200V TJ = 25°C, V GE = +/-20V Mechanical Data Nominal Backmetal Composition, (Thickness) Nominal Front Metal Composition, (Thickness) Dimensions Wafer Diameter Wafer Thickness, Tolerance Relevant Die Mechanical Dwg. Number Minimum Street Width Reject Ink Dot Size Ink Dot Location Recommended Storage Environment Al - Ti - Ni/V - Ag, (1kA - 1kA - 4kA - 6kA) 99% Al/1% Si, (4µm) 0.364" x 0.364" 150mm, with std. < 100 > flat 185µm, +/-15µm 01-5346 100µm 0.25mm diameter minimum Consistent throughout same wafer lot Store in original container, in dessicated nitrogen, with no contamination For optimum electrical results, die attach temperature should not exceed 300°C Recommended Die Attach Conditions Die Outline 9.246 [.364] NOT ES: 1. ALL DIMENS IONS ARE S HOWN IN MILLIMET ERS [INCHES ]. 7.854 [.309] 2. CONT ROLLING DIMENSION: [INCH]. 3. LET T ER DES IGNAT ION: S = S OURCE S K = S OURCE KELVIN G = GAT E IS = CURRENT S ENS E E = EMIT T ER 4. DIMENS IONAL T OLERANCES : 7.757 [.305] BONDING PADS: EMIT TER WIDT H 1.205 [.047] & LENGT H G 1.196 [.047] www.irf.com 01-5346 < 0.635 T OLERANCE = + /- 0.013 < [.0250] T OLERANCE = + /- [.0005] > 0.635 T OLERANCE = + /- 0.025 > [.0250] T OLERANCE = + /- [.0010] OVERALL DIE: < 1.270 T OLERANCE = + /- 0.102 WIDT H < [.050] T OLERANCE = + /- [.004] & > 1.270 T OLERANCE = + /- 0.203 LENGT H > [.050] T OLERANCE = + /- [.008] 2/14/2000