AD ADV3203ASWZ

300 MHz, 32 × 16 Buffered
Analog Crosspoint Switch
ADV3202/ADV3203
FEATURES
Large, 32 × 16, nonblocking switch array
G = +1 (ADV3202) or G = +2 (ADV3203) operation
32 × 32 pin-compatible version available (ADV3200/ADV3201)
Single +5 V, dual ±2.5 V, or dual ±3.3 V supply (G = +2)
Serial programming of switch array
2:1 OSD insertion mux per output
Input sync-tip clamp
High impedance output disable allows connection of
multiple devices with minimal output bus load
Excellent video performance
60 MHz 0.1 dB gain flatness
0.1% differential gain error (RL = 150 Ω)
0.1° differential phase error (RL = 150 Ω)
Excellent ac performance
Bandwidth: >300 MHz
Slew rate: >400 V/μs
Low power: 1 W
Low all hostile crosstalk: −48 dB @ 5 MHz
Reset pin allows disabling of all outputs
Connected through a capacitor to ground, provides
power-on reset capability
176-lead exposed pad LQFP package (24 mm × 24 mm)
FUNCTIONAL BLOCK DIAGRAM
VPOS VNEG DVCC DGND
CLK
193-BIT SHIFT REGISTER
DATA
OUT
DATA IN
96
97
UPDATE
CS
RESET
96
SYNC-TIP
CLAMP
..
.
..
.
16
16 × 5:32
DECODERS
ENABLE/
BYPASS
32
INPUTS
ADV3202
(ADV3203)
PARALLEL LATCH
ENABLE/
DISABLE
OUTPUT
BUFFER
G = +1
(G = +2)
512
SWITCH
MATRIX
..
.
OSD
MUX
16
..
.
16
OUTPUTS
16
REFERENCE
CCTV surveillance
Routing of high speed signals, including
Composite video (NTSC, PAL, S, SECAM)
RGB and component video routing
Compressed video (MPEG, wavelet)
Video conferencing
VCLAMP
OSD
OSD
VREF
INPUTS SWITCHES
07526-001
APPLICATIONS
Figure 1.
GENERAL DESCRIPTION
The ADV3202/ADV3203 are 32 × 16 analog crosspoint switch
matrices. They feature a selectable sync-tip clamp input for
ac-coupled applications and a 2:1 on-screen display (OSD)
insertion mux. With −48 dB of crosstalk and −80 dB isolation
at 5 MHz, the ADV3202/ADV3203 are useful in many high
density routing applications. The 0.1 dB flatness out to 60 MHz
makes the ADV3202/ADV3203 ideal for both composite and
component video switching.
an output bus if building a larger array. The ADV3202 has a
gain of +1 while the ADV3203 has a gain of +2 for ease of use in
back-terminated load applications. A single +5 V supply, dual
±2.5 V supplies, or dual ±3.3 V supplies (G = +2) can be used
while consuming only 195 mA of idle current with all outputs
enabled. The channel switching is performed via a double
buffered, serial digital control that can accommodate daisy
chaining of several devices.
The 16 independent output buffers of the ADV3202/ADV3203
can be placed into a high impedance state for paralleling crosspoint outputs so that off-channels present minimal loading to
The ADV3202/ADV3203 are packaged in a 176-lead exposed
pad LQFP package (24 mm× 24 mm) and are available over the
extended industrial temperature range of −40°C to +85°C.
Rev. 0
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700
www.analog.com
Fax: 781.461.3113
©2008 Analog Devices, Inc. All rights reserved.
ADV3202/ADV3203
TABLE OF CONTENTS
Features .............................................................................................. 1 Power Dissipation..........................................................................6 Applications ....................................................................................... 1 ESD Caution...................................................................................6 Functional Block Diagram .............................................................. 1 Pin Configuration and Function Descriptions..............................7 General Description ......................................................................... 1 Truth Table and Logic Diagram ............................................... 10 Revision History ............................................................................... 2 Typical Performance Characteristics ........................................... 11 Specifications..................................................................................... 3 Theory of Operation ...................................................................... 14 OSD Disabled ................................................................................ 3 Applications Information .............................................................. 16 OSD Enabled ................................................................................. 4 Programming .............................................................................. 16 Timing Characteristics (Serial Mode) ....................................... 5 Outline Dimensions ....................................................................... 17 Absolute Maximum Ratings............................................................ 6 Ordering Guide .......................................................................... 17 Thermal Resistance ...................................................................... 6 REVISION HISTORY
10/08—Revision 0: Initial Version
Rev. 0 | Page 2 of 20
ADV3202/ADV3203
SPECIFICATIONS
OSD DISABLED
VS = ±2.5 V (ADV3202), VS = ±3.3 V (ADV3203) at TA = 25°C, G = +1 (ADV3202), G = +2 (ADV3203), RL = 150 Ω, all configurations,
unless otherwise noted.
Table 1.
Parameter
DYNAMIC PERFORMANCE
−3 dB Bandwidth
Gain Flatness
Settling Time
Slew Rate
NOISE/DISTORTION PERFORMANCE
Differential Gain Error
Differential Phase Error
Crosstalk, All Hostile, RTI
Off Isolation, Input-to-Output
Input Voltage Noise
DC PERFORMANCE
Gain Error
Gain Matching
OUTPUT CHARACTERISTICS
Output Impedance
Output Capacitance
Output Voltage Range
INPUT CHARACTERISTICS
Input Offset Voltage
Input Voltage Range
Input Capacitance
Input Resistance
Input Bias Current
SWITCHING CHARACTERISTICS
Enable On Time
Switching Time, 2 V Step
Switching Transient (Glitch)
Conditions
Min
ADV3202/ADV3203
Typ
Max
Unit
200 mV p-p
2 V p-p
0.1 dB, 200 mV p-p
0.1 dB, 2 V p-p
1% , 2 V step
2 V step, peak
300
120
60
40
6
400
MHz
MHz
MHz
MHz
ns
V/μs
NTSC or PAL
NTSC or PAL
f = 5 MHz, RL = 150 Ω
RL = 1 kΩ
f = 100 MHz, RL = 150 Ω
RL = 1 kΩ
f = 5 MHz, one channel
0.1 MHz to 50 MHz
0.06/0.1
0.06/0.03
−48
−65
−23
−30
−80
25/22
%
Degrees
dB
dB
dB
dB
dB
nV/√Hz
Broadcast mode, no load
Broadcast mode
No load, channel-to-channel
Channel-to-channel
±0.5
±0.5
±0.5/±0.8
±0.5/±0.8
DC, enabled
DC, disabled
Disabled
ADV3202
ADV3203
ADV3203, no output load
−1.1 to +1.1
−1.5 to +1.5
−1.5 to +1.5
ADV3202
ADV3203
ADV3203, no output load
−1.1 to +1.1
−0.75 to +0.75
−0.75 to +0.75
Sync-tip clamp enabled,
VIN = VCLAMP + 0.1 V
Sync-tip clamp enabled,
VIN = VCLAMP − 0.1 V
Sync-tip clamp disabled
50% update to 1% settling
50% update to 1% settling
IN00 to IN31, RTI
Rev. 0 | Page 3 of 20
900/3.2
±1.75/±2.2
±2.2/±2.7
±2.8
±3.4
0.15
1000/4
3.7
−1.2 to +1.2
−1.6 to +2.0
−2.0 to +2.0
%
%
%
%
Ω
kΩ
pF
V
V
V
1
0.1
±5
−1.2 to +1.2
−0.8 to +1.0
−1.0 to +1.0
3
4
3
±30
12
mV
V
V
V
pF
MΩ
μA
−2.9
−1
−0.25
mA
−10
−3
μA
50
40
300
ns
ns
mV p-p
ADV3202/ADV3203
Parameter
POWER SUPPLIES
Supply Current
Supply Voltage Range
PSR
OPERATING TEMPERATURE RANGE
Temperature Range
θJA
Conditions
ADV3202/ADV3203
Typ
Max
Min
Unit
195/200
220/235
mA
155/165
3.5
mA
mA
V
VNEG, VPOS, f = 1 MHz
120/130
2.5
5 ± 10%/
6.6 ± 10%
−50/−45
Operating (still air)
Operating (still air)
−40 to +85
16
VPOS or VNEG, outputs enabled,
no load
VPOS or VNEG, outputs disabled
DVCC
VPOS − VNEG
dB
°C
°C/W
OSD ENABLED
VS = ±2.5 V (ADV3202), VS = ±3.3 V (ADV3203) at TA = 25°C, G = +1 (ADV3202), G = +2 (ADV3203), RL = 150 Ω, all configurations,
unless otherwise noted.
Table 2.
Parameter
OSD DYNAMIC PERFORMANCE
−3 dB Bandwidth
Gain Flatness
Settling Time
Slew Rate
OSD NOISE/DISTORTION PERFORMANCE
Differential Gain Error
Differential Phase Error
Input Voltage Noise
OSD DC PERFORMANCE
Gain Error
OSD INPUT CHARACTERISTICS
Input Bias Current
OSD SWITCHING CHARACTERISTICS
OSD Switch Delay, 2 V Step
OSD Switching Transient (Glitch)
Conditions
Min
ADV3202/ADV3203
Typ
Max
Unit
200 mV p-p
2 V p-p
0.1 dB, 200 mV p-p
0.1 dB, 2 V p-p
1%, 2 V step
2 V step, peak
170/150
135/130
35
35
6
400
MHz
MHz
MHz
MHz
ns
V/μs
NTSC or PAL
NTSC or PAL
0.5 MHz to 50 MHz
0.12/0.35
0.06/0.04
27/25
%
Degrees
nV/√Hz
No load
±0.1
±0.1
Sync-tip clamp disabled
50% OSD switch to 1% settling
Rev. 0 | Page 4 of 20
−10
±2.3/±2.2
±2.7
%
%
−4
μA
20
15/40
ns
mV p-p
ADV3202/ADV3203
TIMING CHARACTERISTICS (SERIAL MODE)
Specifications subject to change without notice.
Table 3.
Parameter
Serial Data Setup Time
CLK Pulse Width
Serial Data Hold Time
CLK Pulse Separation
CLK to UPDATE Delay
UPDATE Pulse Width
CLK to DATA OUT Valid
Propagation Delay, UPDATE to Switch On or Off
Data Load Time, CLK = 5 MHz, Serial Mode
RESET Time
Symbol
t1
t2
t3
t4
t5
t6
t7
Min
40
50
50
150
Limit
Typ
Max
50
160
Unit
ns
ns
ns
ns
ns
ns
ns
ns
μs
ns
40
130
50
38.6
160
1
CS
0
t2
1
t4
LOAD DATA INTO
SERIAL REGISTER
ON RISING EDGE
CLK
0
t1
t3
1
CLAMP
ON/OFF
DATA IN
OUT15 (D5)
OUT00 (D0)
0
t5
1 = LATCHED
t6
TRANSFER DATA FROM SERIAL
REGISTER TO PARALLEL
LATCHES DURING LOW LEVEL
UPDATE
0 = TRANSPARENT
07526-002
t7
DATA OUT
Figure 2. Timing Diagram, Serial Mode
Table 4. Logic Levels, DVCC = 3.3 V
VIH
RESET, CS,
CLK, DATA IN,
UPDATE, OSDS
VIL
RESET, CS,
CLK, DATA IN,
UPDATE, OSDS
VOH
DATA OUT
VOL
DATA OUT
IIH
RESET, CS,
CLK, DATA IN,
UPDATE, OSDS
IIL
RESET, CS,
CLK, DATA IN,
UPDATE, OSDS
IOH
DATA OUT
IOL
DATA OUT
2.5 V min
0.8 V max
2.7 V min
0.5 V max
0.5 μA typ
−0.5 μA typ
3 mA typ
−3 mA typ
Rev. 0 | Page 5 of 20
ADV3202/ADV3203
ABSOLUTE MAXIMUM RATINGS
POWER DISSIPATION
Table 5.
The ADV3202/ADV3203 are operated with ±2.5 V, +5 V, or
±3.3 V supplies and can drive loads down to 150 Ω, resulting in
a large range of possible power dissipations. For this reason,
extra care must be taken while derating the operating conditions
based on ambient temperature.
Rating
7.5 V
6V
+0.5 V to –4 V
9.4 V
<3 V
<3 V
6V
VPOS – 3.5 V to VNEG + 3.5 V
VPOS – 4 V to VNEG + 4 V
VNEG to VPOS
DVCC
(VPOS − 1 V) to (VNEG + 1 V)
Packaged in a 176-lead exposed-pad LQFP, the ADV3202/
ADV3203 junction-to-ambient thermal impedance (θJA) is
16°C/W. For long-term reliability, the maximum allowed
junction temperature of the die should not exceed 150°C.
Temporarily exceeding this limit may cause a shift in parametric
performance due to a change in stresses exerted on the die by
the package. Exceeding a junction temperature of 175°C for an
extended period can result in device failure. Figure 3 shows the
range of allowed internal die power dissipations that meet these
conditions over the −40°C to +85°C ambient temperature range.
When using Figure 3, do not include external load power in the
maximum power calculation, but do include load current
dropped on the die output transistors.
9
Momentary
45 mA
−65°C to +125°C
−40°C to +85°C
300°C
TJ = 150°C
8
MAXIMUM POWER (W)
150°C
Stresses above those listed under Absolute Maximum Ratings
may cause permanent damage to the device. This is a stress
rating only; functional operation of the device at these or any
other conditions above those indicated in the operational
section of this specification is not implied. Exposure to absolute
maximum rating conditions for extended periods may affect
device reliability.
THERMAL RESISTANCE
6
5
4
3
15
25
ESD CAUTION
Table 6. Thermal Resistance
θJA
16
35
45
55
65
AMBIENT TEMPERATURE (°C)
75
85
Figure 3. Maximum Die Power Dissipation vs. Ambient Temperature
θJA is specified for the worst-case conditions, that is, a device
soldered in a circuit board for surface-mount packages.
Package Type
176-Lead LQFP_EP
7
07526-003
Parameter
Analog Supply Voltage (VPOS − VNEG)
Digital Supply Voltage
(DVCC − DGND)
Ground Potential Difference
(VNEG − DGND)
Maximum Potential Difference
DVCC − VNEG
Disabled Outputs
ADV3202 (|VOSD − VOUT|)
ADV3203 (|VOSD −(VOUT+VREF)/2|)
|VCLAMP − VINxx|
VREF Input Voltage
ADV3202
ADV3203
Analog Input Voltage
Digital Input Voltage
Output Voltage
(Disabled Analog Output)
Output Short-Circuit Duration
Output Short-Circuit Current
Storage Temperature Range
Operating Temperature Range
Lead Temperature
(Soldering, 10 sec)
Junction Temperature
Unit
°C/W
Rev. 0 | Page 6 of 20
ADV3202/ADV3203
134
133
135
137
136
138
140
139
141
142
143
144
145
148
147
146
150
149
151
152
153
155
154
156
157
158
159
160
161
162
163
164
165
166
168
167
169
170
171
173
172
174
1
132
PIN 1
2
131
3
130
4
129
5
128
6
127
7
126
8
125
9
124
10
123
11
122
12
121
13
120
14
119
15
118
16
117
17
116
18
115
19
114
20
113
21
112
ADV3202/ADV3203
22
111
TOP VIEW
(Not to Scale)
23
24
110
109
25
108
26
107
27
106
28
105
29
104
30
103
31
102
88
87
86
85
84
83
82
81
80
79
78
77
76
75
74
73
72
71
70
69
68
67
66
65
64
63
62
61
VNEG
NC
NC
NC
NC
NC
OSDS00
IN16
OSDS01
IN17
OSDS02
IN18
OSDS03
IN19
OSDS04
IN20
OSDS05
IN21
OSDS06
IN22
OSDS07
IN23
OSDS08
IN24
OSDS09
IN25
OSDS10
IN26
OSDS11
IN27
OSDS12
IN28
OSDS13
IN29
OSDS14
IN30
OSDS15
IN31
VPOS
OSD00
OSD01
OSD02
OSD03
VNEG
OSD14
OSD13
OSD12
OSD11
OSD10
OSD09
OSD08
VPOS
OUT15
VNEG
OUT14
VPOS
OUT13
VNEG
OUT12
VPOS
OUT11
VNEG
OUT10
VPOS
OUT09
VNEG
OUT08
VPOS
OUT07
VNEG
OUT06
VPOS
OUT05
VNEG
OUT04
VPOS
OUT03
VNEG
OUT02
VPOS
OUT01
VNEG
OUT00
VPOS
OSD07
OSD06
OSD05
OSD04
60
89
59
90
44
58
91
43
57
92
42
56
93
41
55
94
40
54
95
39
53
96
38
52
97
37
51
98
36
50
99
35
49
34
48
100
47
101
33
46
32
45
DVCC
NC
RESET
CLK
DATA IN
DATA OUT
UPDATE
CS
DGND
IN00
DGND
IN01
DGND
IN02
DGND
IN03
DGND
IN04
DGND
IN05
DGND
IN06
DGND
IN07
DGND
IN08
DGND
IN09
DGND
IN10
DGND
IN11
DGND
IN12
DGND
IN13
DGND
IN14
DGND
IN15
VNEG
VREF
VCLAMP
OSD15
175
176
DGND
NC
NC
NC
NC
NC
NC
NC
VPOS
NC
VNEG
NC
VPOS
NC
VNEG
NC
VPOS
NC
VNEG
NC
VPOS
NC
VNEG
NC
VPOS
NC
VNEG
NC
VPOS
NC
VNEG
NC
VPOS
NC
VNEG
NC
VPOS
NC
VNEG
NC
VPOS
NC
NC
NC
PIN CONFIGURATION AND FUNCTION DESCRIPTIONS
07526-004
NOTES
1. NC = NO CONNECT
2. OSDS#: OSD SELECT FOR OUTPUT #
OSD#: OSD VIDEO INPUT FOR OUTPUT #
3. THE EXPOSED PAD SHOULD BE
CONNECTED TO ANALOG GROUND.
Figure 4. Pin Configuration
Rev. 0 | Page 7 of 20
ADV3202/ADV3203
Table 7. Pin Function Descriptions
Pin
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
Mnemonic
DVCC
NC
RESET
CLK
DATA IN
DATA OUT
UPDATE
CS
DGND
IN00
DGND
IN01
DGND
IN02
DGND
IN03
DGND
IN04
DGND
IN05
DGND
IN06
DGND
IN07
DGND
IN08
DGND
IN09
DGND
IN10
DGND
IN11
DGND
IN12
DGND
IN13
DGND
IN14
DGND
IN15
VNEG
VREF
43
VCLAMP
44
45
46
47
48
49
OSD15
OSD14
OSD13
OSD12
OSD11
OSD10
Description
Digital Positive Power Supply.
No Connect.
Control Pin: 1st and 2nd Rank Reset.
Control Pin: Serial Data Clock.
Control Pin: Serial Data In.
Control Pin: Serial Data Out.
Control Pin: Second Rank Write Strobe.
Control Pin: Chip Select.
Digital Negative Power Supply.
Input Number 0.
Digital Negative Power Supply.
Input Number 1.
Digital Negative Power Supply.
Input Number 2.
Digital Negative Power Supply.
Input Number 3.
Digital Negative Power Supply.
Input Number 4.
Digital Negative Power Supply.
Input Number 5.
Digital Negative Power Supply.
Input Number 6.
Digital Negative Power Supply.
Input Number 7.
Digital Negative Power Supply.
Input Number 8.
Digital Negative Power Supply.
Input Number 9.
Digital Negative Power Supply.
Input Number 10.
Digital Negative Power Supply.
Input Number 11.
Digital Negative Power Supply.
Input Number 12.
Digital Negative Power Supply.
Input Number 13.
Digital Negative Power Supply.
Input Number 14.
Digital Negative Power Supply.
Input Number 15.
Analog Negative Power Supply.
Reference Voltage. See the Theory of
Operation section for details.
Sync-Tip Clamp Voltage. See the
Theory of Operation section for details.
OSD Input Number 15.
OSD Input Number 14.
OSD Input Number 13.
OSD Input Number 12.
OSD Input Number 11.
OSD Input Number 10.
Pin
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
Rev. 0 | Page 8 of 20
Mnemonic
OSD09
OSD08
VPOS
OUT15
VNEG
OUT14
VPOS
OUT13
VNEG
OUT12
VPOS
OUT11
VNEG
OUT10
VPOS
OUT09
VNEG
OUT08
VPOS
OUT07
VNEG
OUT06
VPOS
OUT05
VNEG
OUT04
VPOS
OUT03
VNEG
OUT02
VPOS
OUT01
VNEG
OUT00
VPOS
OSD07
OSD06
OSD05
OSD04
VNEG
OSD03
OSD02
OSD01
OSD00
VPOS
IN31
OSDS15
IN30
OSDS14
IN29
OSDS13
Description
OSD Input Number 9.
OSD Input Number 8.
Analog Positive Power Supply.
Output Number 15.
Analog Negative Power Supply.
Output Number 14.
Analog Positive Power Supply.
Output Number 13.
Analog Negative Power Supply.
Output Number 12.
Analog Positive Power Supply.
Output Number 11.
Analog Negative Power Supply.
Output Number 10.
Analog Positive Power Supply.
Output Number 9.
Analog Negative Power Supply.
Output Number 8.
Analog Positive Power Supply.
Output Number 7.
Analog Negative Power Supply.
Output Number 6.
Analog Positive Power Supply.
Output Number 5.
Analog Negative Power Supply.
Output number 4.
Analog Positive Power Supply.
Output Number 3.
Analog Negative Power Supply.
Output Number 2.
Analog Positive Power Supply.
Output Number 1.
Analog Negative Power Supply.
Output Number 0.
Analog Positive Power Supply.
OSD Input Number 7.
OSD Input Number 6.
OSD Input Number 5.
OSD Input Number 4.
Analog Negative Power Supply.
OSD Input Number 3.
OSD Input Number 2.
OSD Input Number 1.
OSD Input Number 0.
Analog Positive Power Supply.
Input Number 31.
Control Pin: OSD Select Number 15.
Input Number 30.
Control Pin: OSD Select Number 14.
Input Number 29.
Control Pin: OSD Select Number 13.
ADV3202/ADV3203
Pin
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
Mnemonic
IN28
OSDS12
IN27
OSDS11
IN26
OSDS10
IN25
OSDS09
IN24
OSDS08
IN23
OSDS07
IN22
OSDS06
IN21
OSDS05
IN20
OSDS04
IN19
OSDS03
IN18
OSDS02
IN17
OSDS01
IN16
OSDS00
NC
NC
NC
NC
NC
VNEG
NC
NC
NC
VPOS
NC
VNEG
NC
Description
Input Number 28.
Control Pin: OSD Select Number 12.
Input Number 27.
Control Pin: OSD Select Number 11.
Input Number 26.
Control Pin: OSD Select Number 10.
Input Number 25.
Control Pin: OSD Select Number 9.
Input Number 24.
Control Pin: OSD Select Number 8.
Input Number 23.
Control Pin: OSD Select Number 7.
Input Number 22.
Control Pin: OSD Select Number 6.
Input Number 21.
Control Pin: OSD Select Number 5.
Input Number 20.
Control Pin: OSD Select Number 4.
Input Number 19.
Control Pin: OSD Select Number 3.
Input Number 18.
Control Pin: OSD Select Number 2.
Input Number 17.
Control Pin: OSD Select Number 1.
Input Number 16.
Control Pin: OSD Select Number 0.
No Connect.
No Connect.
No Connect.
No Connect.
No Connect.
Analog Negative Power Supply.
No Connect.
No Connect.
No Connect.
Analog Positive Power Supply.
No Connect.
Analog Negative Power Supply.
No Connect.
Pin
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
Rev. 0 | Page 9 of 20
Mnemonic
VPOS
NC
VNEG
NC
VPOS
NC
VNEG
NC
VPOS
NC
VNEG
NC
VPOS
NC
VNEG
NC
VPOS
NC
VNEG
NC
VPOS
NC
VNEG
NC
VPOS
NC
VNEG
NC
VPOS
NC
NC
NC
NC
NC
NC
NC
DGND
EPAD
(exposed pad)
Description
Analog Positive Power Supply.
No Connect.
Analog Negative Power Supply.
No Connect.
Analog Positive Power Supply.
No Connect.
Analog Negative Power Supply.
No Connect.
Analog Positive Power Supply.
No Connect.
Analog Negative Power Supply.
No Connect.
Analog Positive Power Supply.
No Connect.
Analog Negative Power Supply.
No Connect.
Analog Positive Power Supply.
No Connect.
Analog Negative Power Supply.
No Connect.
Analog Positive Power Supply.
No Connect.
Analog Negative Power Supply.
No Connect.
Analog Positive Power Supply.
No Connect.
Analog Negative Power Supply.
No Connect.
Analog Positive Power Supply.
No Connect.
No Connect.
No Connect.
No Connect.
No Connect.
No Connect.
No Connect.
Digital Negative Power Supply.
Connect to analog ground.
ADV3202/ADV3203
TRUTH TABLE AND LOGIC DIAGRAM
Table 8. Operation Truth Table
CS
UPDATE
X
X
0
1
0
0
1
X
1
CLK
X
RESET
DATA INPUT
X
DATA OUTPUT
X
0
Datai 1
Datai-193
1
X
X
X
1
X
X
X
1
Operation/Comment
Asynchronous reset. All outputs are disabled; the 193-bit shift
register is reset to all 0s.
The data on the serial DATA IN line is loaded into the serial
register. The first bit clocked into the serial register appears at
DATA OUT 193 clock cycles later.
Switch matrix update. Data in the 193-bit shift register transfers
into the parallel latches that control the switch array and synctip clamps.
Chip is not selected. No change in logic.
Datai: serial data.
Rev. 0 | Page 10 of 20
ADV3202/ADV3203
TYPICAL PERFORMANCE CHARACTERISTICS
VS = ±2.5 V (ADV3202), VS = ±3.3 V (ADV3203) at TA = 25°C, RL = 150 Ω.
1.2
2
INxx
0
0.8
–2
0.4
–4
VOUT (V)
GAIN (dB)
OSDxx
–6
0
–0.4
–8
INxx
10
100
FREQUENCY (MHz)
1k
–1.2
07526-005
1
Figure 5. ADV3202 Small Signal Frequency Response, 200 mV p-p
0
2
4
6
8
10
12
TIME (ns)
18
20
600
0
400
–2
RISING EDGE
dV/dT (V/µs)
200
–4
–6
OSDxx
–8
0
–200
FALLING EDGE
INxx
–400
–10
10
100
FREQUENCY (MHz)
1k
–600
07526-006
1
0
2
4
Figure 6. ADV3202 Large Signal Frequency Response, 2 V p-p
6
8
10
12
TIME (ns)
14
16
18
20
07526-009
GAIN (dB)
16
Figure 8. ADV3202 Large Signal Pulse Response, 2 V p-p
2
–12
14
07526-008
–10
–12
OSDxx
–0.8
Figure 9. ADV3202 Slew Rate
0.05
0.12
0.04
0.08
DIFFERENTIAL GAIN (%)
0.03
0
–0.04
OSDxx
0.01
0
–0.01
–0.02
0
2
4
6
8
10
12
TIME (ns)
14
16
18
Figure 7. ADV3202 Small Signal Pulse Response, 200 mV p-p
20
–0.05
–0.7
–0.5
–0.3
–0.1
0.1
0.3
INPUT DC OFFSET (V)
0.5
0.7
07526-010
–0.04
INxx
–0.12
0.02
–0.03
–0.08
07526-007
VOUT (V)
0.04
Figure 10. ADV3202 Differential Gain, Carrier Frequency = 3.58 MHz,
Subcarrier Amplitude = 300 mV p-p
Rev. 0 | Page 11 of 20
0.010
0.12
0.005
0.08
0
0.04
VOUT (V)
DIFFERENTIAL PHASE (Degrees)
ADV3202/ADV3203
–0.005
0
–0.010
–0.04
–0.015
–0.08
OSDxx
–0.5
–0.3
–0.1
0.1
0.3
INPUT DC OFFSET (V)
0.5
0.7
–0.12
07526-011
–0.020
–0.7
Figure 11. ADV3202 Differential Phase, Carrier Frequency = 3.58 MHz,
Subcarrier Amplitude = 300 mV p-p
2
4
6
8
10
12
TIME (ns)
14
16
18
20
Figure 14. ADV3203 Small Signal Pulse Response, 200 mV p-p
8
1.2
6
0.8
4
0.4
INxx
2
VOUT (V)
GAIN (dB)
0
07526-014
INxx
OSDxx
0
0
–0.4
–2
10
100
FREQUENCY (MHz)
1k
–1.2
Figure 12. ADV3203 Small Signal Frequency Response, 200 mV p-p
INxx
0
2
4
6
8
10
12
TIME (ns)
14
16
18
20
07526-015
1
07526-012
–6
OSDxx
–0.8
–4
Figure 15. ADV3203 Large Signal Pulse Response, 2 V p-p
600
8
6
OSDxx
400
INxx
RISING EDGE
4
dV/dT (V/µs)
2
0
0
–200
–2
FALLING EDGE
–6
1
10
100
FREQUENCY (MHz)
1k
–600
Figure 13. ADV3203 Large Signal Frequency Response, 2 V p-p
0
2
4
6
8
10
12
TIME (ns)
14
Figure 16. ADV3203 Slew Rate
Rev. 0 | Page 12 of 20
16
18
20
07526-016
–400
–4
07526-013
GAIN (dB)
200
ADV3202/ADV3203
0.10
DIFFERENTIAL GAIN (%)
0.05
0
–0.05
–0.15
–0.7
–0.5
–0.3
–0.1
0.1
0.3
INPUT DC OFFSET (V)
0.5
0.7
07526-017
–0.10
Figure 17. ADV3203 Differential Gain, Carrier Frequency = 3.58 MHz,
Subcarrier Amplitude = 300 mV p-p
0.05
DIFFERENTIAL PHASE (Degrees)
0.04
0.03
0.02
0.01
0
–0.01
–0.02
–0.03
–0.05
–0.7
–0.5
–0.3
–0.1
0.1
0.3
INPUT DC OFFSET (V)
0.5
0.7
07526-018
–0.04
Figure 18. ADV3203 Differential Phase, Carrier Frequency = 3.58 MHz,
Subcarrier Amplitude = 300 mV p-p
Rev. 0 | Page 13 of 20
ADV3202/ADV3203
THEORY OF OPERATION
The ADV3202/ADV3203 are single-ended crosspoint arrays
with 16 outputs, each of which can be connected to any one
of 32 inputs.The 32 switchable input stages are connected to
each output buffer to form 32-to-1 multiplexers. There are 16 of
these multiplexers, each with its inputs wired in parallel, for a
total array of 512 stages forming a multicast-capable crosspoint
switch. In addition to connecting to any of the nominal inputs
(INxx), each output can also be connected to an associated OSD
input through an additional 2-to-1 multiplexer at each output.
This 2-to-1 multiplexer switches between the output of the 32to-1 multiplexer and the OSD input.
FROM INPUT
STAGES
VPOS
OSDS00
x1
OUT00
VNEG
Each input to the ADV3202/ADV3203 is buffered by a receiver.
The purpose of this receiver is to provide overvoltage protection
for the input stages by limiting signal swing. In the ADV3202,
the output of the receiver is limited to ±1.2 V about VREF,
while in the ADV3203, the signal swing is limited to ±1.2 V
about midsupply. This receiver is configured as a voltage
feedback unity-gain amplifier. Excess loop gain bandwidth
product reduces the effect of the closed-loop gain on the
bandwidth of the device. In addition to a receiver, each input
also has a sync-tip clamp for use in ac-coupled applications.
This clamp is either enabled or disabled according to the 193rd
serial data bit. When enabled, the clamp forces the lowest video
voltage to the voltage on the VCLAMP pin. The VCLAMP pin
is common for the entire chip and needs to be driven with a low
impedance to avoid crosstalk.
VPOS
VPOS
VPOS
OSD00
07526-019
VCLAMP
TO INPUT
RECEIVER
VNEG
Figure 19. Conceptual Diagram of Single Output Channel, G = +1 (ADV3202)
IN00
Decoding logic for each output selects one (or none) of the
input stages to drive the output stage. The enabled input stage
drives the output stage, which is configured as a unity-gain
amplifier in the ADV3202 (see Figure 19). In the ADV3203, an
internal resistive feedback network and reference buffer provide
for a total output stage gain of +2 (see Figure 20). The input
voltage to the reference buffer is the VREF pin. This voltage is
common for the entire chip and needs to be driven with a low
impedance to avoid crosstalk.
VPOS
FROM INPUT
STAGES
OSDS00
x1
OUT00
VNEG
VPOS
OSD00
VNEG
VPOS
2kΩ
2kΩ
VNEG
07526-020
VREF
Figure 20. Conceptual Diagram of Single Output Channel, G = +2 (ADV3203)
OFF-CHIP
CAPACITOR
5µA
07526-021
VNEG
Figure 21. Conceptual Diagram of Sync-Tip Clamp in an
AC-Coupled Application
The output stage of the ADV3202/ADV3203 is designed for low
differential gain and phase error when driving composite video
signals. It also provides slew current for fast pulse response
when driving component video signals.
The outputs of the ADV3202/ADV3203 can be disabled to
minimize on-chip power dissipation. When disabled, a series of
internal amplifiers drive internal nodes such that a wideband
high impedance is presented at the disabled output, even while
the output bus is under large signal swings. (In the ADV3203,
there is 4 kΩ of resistance terminated to the VREF voltage by
the reference buffer). This high impedance allows multiple ICs
to be bussed together without additional buffering. Care must
be taken to reduce output capacitance, which results in more
overshoot and frequency domain peaking. In addition, when
the outputs are disabled and driven externally, the voltage
applied to them should not exceed the valid output swing range
for the ADV3202/ADV3203 to keep these internal amplifiers in
their linear range of operation. Applying excess voltage to the
disabled outputs can cause damage to the ADV3202/ADV3203
and should be avoided (see the Absolute Maximum Ratings
section for guidelines).
Rev. 0 | Page 14 of 20
ADV3202/ADV3203
The internal connection of the ADV3202/ADV3203 is
controlled by a TTL-compatible logic interface. Serial loading
into a first rank of latches preprograms each output. A global
update signal moves the programming data into the second
rank of latches, simultaneously updating all outputs. A serial
out pin allows devices to be daisy chained together for single
pin programming of multiple ICs. A power-on reset pin is
available to prevent bus conflicts by disabling all outputs.
The ADV3202 can operate on a single +5 V supply, powering
both the signal path (with the VPOS/VNEG supply pins) and
the control logic interface (with the VDD/DGND supply pins).
However, to easily interface to ground referenced video signals,
split supply operation is possible with ±2.5 V. (The ADV3203 is
intended to operate on ±3.3 V.) In the case of split supplies, a
flexible logic interface allows the control logic supplies
(VDD/DGND) to be run off +3.3 V/0 V to +5 V/0 V while the
core remains on split supplies.
Rev. 0 | Page 15 of 20
ADV3202/ADV3203
APPLICATIONS INFORMATION
PROGRAMMING
The ADV3202/ADV3203 are programmed serially through a
193-bit serial word that updates the matrix and the state of the
sync-tip clamps each time the part is programmed.
Serial Programming Description
The serial programming mode uses the CLK, DATA IN,
UPDATE, and CS device pins. The first step is to assert a low
on CS to select the device for programming. The UPDATE
signal should be high during the time that data is shifted into
the serial port of the device. Although the data still shifts in
when UPDATE is low, the transparent, asynchronous latches
allow the shifting data to reach the matrix. This causes the
matrix to try to update to every intermediate state as defined by
the shifting data.
The data at DATA IN is clocked in at every rising edge of CLK.
A total of 193 bits must be shifted in to complete the programming. For each of the 16 outputs, there are five bits (D0 to D4)
that determine the source of its input followed by one bit (D5)
that determines the enabled state of the output. If D5 is low
(output disabled), the five associated bits (D0 to D4) do not
matter because no input is switched to that output. These
comprise the first 96 bits of DATA IN. The remaining 96 bits of
DATA IN should be set to zero. If a string of 96 zeros is not
suffixed to the first 96 bits of DATA IN, a certain test mode is
employed that can cause the device to draw up to 30% more
current. The last bit, Bit 193, is used to enable or disable the
sync-tip clamps. If Bit 193 is low, the sync-tip clamps are
disabled; otherwise, they are enabled.
The sync-tip clamp bit is shifted in first, followed by the most
significant output address data (OUT15). The enable bit (D5) is
shifted in first, followed by the input address (D4 to D0) entered
sequentially with D4 first and D0 last. Each remaining output is
programmed sequentially, until the least significant output
address data is shifted in. At this point, UPDATE can be taken
low, which causes the programming of the device according to
the data that was just shifted in. The UPDATE latches are
asynchronous and when UPDATE is low, they are transparent.
If more than one ADV3202/ADV3203 device is to be serially
programmed in a system, the DATA OUT signal from one
device can be connected to the DATA IN of the next device to
form a serial chain. All of the CLK and UPDATE pins should be
connected in parallel and operated as described previously. The
serial data is input to the DATA IN pin of the first device of the
chain, and it ripples through to the last. Therefore, the data for
the last device in the chain should come at the beginning of the
programming sequence. The length of the programming
sequence is 193 bits times the number of devices in the chain.
Reset
When powering up the ADV3200/ADV3201, it is often useful
to have the outputs come up in the disabled state. The RESET
pin, when taken low, causes all outputs to be disabled. After
power-up, the UPDATE pin should be driven high prior to
raising RESET.
Because the data in the shift register is random after power-up,
it should not be used to program the matrix, or the matrix may
enter unknown states. To prevent this, do not apply a logic low
signal to UPDATE initially after power-up. The shift register
should first be loaded with data and UPDATE then taken low to
program the device.
The RESET pin has a 25 kΩ pull-up resistor to DVCC that can
be used to create a simple power-on reset circuit. A capacitor
from RESET to ground holds RESET low for some time while
the rest of the device stabilizes. The low condition causes all the
outputs to be disabled. The capacitor then charges through the
pull-up resistor to the high state, thus allowing full programming
capability of the device.
The CS pin has a 25 kΩ pull-down resistor to ground.
Rev. 0 | Page 16 of 20
ADV3202/ADV3203
OUTLINE DIMENSIONS
0.75
0.60
0.45
1.00 REF
26.20
26.00 SQ
25.80
1.60 MAX
24.10
24.00 SQ
23.90
21.50 REF
133
176
132
1
SEATING
PLANE
133
1
PIN 1
7.80
REF
EXPOSED
PAD
TOP VIEW
(PINS DOWN)
1.45
1.40
1.35
176
132
0.20
0.15
0.09
7°
3.5°
0°
BOTTOM VIEW
(PINS UP)
44
89
45
88
88
VIEW A
VIEW A
44
89
45
0.50
BSC
LEAD PITCH
ROTATED 90° CCW
0.27
0.22
0.17
COMPLIANT TO JEDEC STANDARDS MS-026-BGA-HD
FOR PROPER CONNECTION OF
THE EXPOSED PAD, REFER TO
THE PIN CONFIGURATION AND
FUNCTION DESCRIPTIONS
SECTION OF THIS DATA SHEET.
Figure 22. 176-Lead Low Profile Quad Flat Package, Exposed Pad [LQFP_EP]
(SW-176-1)
Dimensions shown in millimeters
ORDERING GUIDE
Model
ADV3202ASWZ 1
ADV3203ASWZ1
1
Temperature Range
−40°C to +85°C
−40°C to +85°C
Package Description
176-Lead Low Profile Quad Flat Package, Exposed Pad [LQFP_EP]
176-Lead Low Profile Quad Flat Package, Exposed Pad [LQFP_EP]
Z = RoHS Compliant Part.
Rev. 0 | Page 17 of 20
Package Option
SW-176-1
SW-176-1
081808-A
0.15
0.10
0.05
0.08
COPLANARITY
ADV3202/ADV3203
NOTES
Rev. 0 | Page 18 of 20
ADV3202/ADV3203
NOTES
Rev. 0 | Page 19 of 20
ADV3202/ADV3203
NOTES
©2008 Analog Devices, Inc. All rights reserved. Trademarks and
registered trademarks are the property of their respective owners.
D07526-0-10/08(0)
Rev. 0 | Page 20 of 20