EPS13D2 Series • RoHS Compliant (Pb-Free) • EPS™ Spread Spectrum Programmable Clock Oscillators • Ceramic 4-pad SMD Package • Low EMI LVHCMOS Output • 3.3V Supply Voltage • Stability to 100ppm • Center Spread and Down Spread Modulation • Tri-State and Power Down Options Available • Available on Tape & Reel EPS13D2 H L W 1.6 7.0 5.0 OSCILLATOR ELECTRICAL SPECIFICATIONS Nominal Frequency Operating Temperature Range Storage Temperature Range Supply Voltage (VDD) Maximum Supply Voltage Input Current Frequency Tolerance / Stability Output Voltage Logic High (VOH) Output Voltage Logic Low (VOL) Rise Time / Fall Time Duty Cycle Load Drive Capability Output Control Function Tri-State/Power Down Input Voltage Power Down Output Disable Time Power Down Output Enable Time Standby Current Tri-State Output Disable Time Tri-State Output Enable Time Disable Current Spread Spectrum Percentage Modulation Frequency Period Jitter Aging Start Up Time Unloaded; VDD = 3.3VDC Inclusive of All Conditions: Frequency Stability over the Operating Temperature Range, Supply Voltage Change, Output Load Change, 1st Year Aging at 25°C, Shock, and Vibration IOH = -8mA IOL = +8mA 20% to 80% of waveform at 50% of waveform 14.318MHz to 166.000MHz -20°C to 70°C -55°C to 125°C 3.3VDC ±0.3VDC -0.5VDC to 7.0VDC 30mA Maximum ±100ppm Maximum VDD-0.4VDC Minimum 0.4VDC Maximum 2.7nSeconds Maximum 50 ±10(%) 50 ±5(%) 15pF HCMOS Load Maximum Internal Pull Down Resistor of 100kOhms Typical on Pad 3, Tri-State or Power Down Internal Pull Up Resistor of 100kOhms Typical on Pad 1 VIH of 70% of VDD Minimum Enables Output No Connection Enables Output VIL of 30% of VDD Maximum Disables Output: High Impedance 350nSec Maximum 3mSec Maximum Unloaded; Pad 1 = Ground; VDD = 3.3VDC 50μA Maximum 350nSec Maximum 350nSec Maximum Unloaded; Pad 1 = Ground; VDD = 3.3VDC 20mA Maximum ±0.25%, ±0.50%, ±0.75%, ±1.0%, ±1.5%, ±2.0% Center Spread -0.50%, -1.0%, -1.5%, -2.0%, -3.0%, -4.0% Down Spread 30kHz Minimum, 31.5kHz Typical, 33kHz Maximum 700pSec Maximum < 25.000MHz Cycle to Cycle; Spread Spectrum-On; VDD = 3.3VDC 400pSec Maximum 25.000MHz to 133.000MHz 300pSec Maximum > 133.000MHz First Year at 25°C ±5ppm Maximum 10mSec Maximum MANUFACTURER CATEGORY SERIES PACKAGE VOLTAGE CLASS REV.DATE ECLIPTEK CORP. OSCILLATOR EPS13D2 CERAMIC 3.3V OS2G 09/07 800-ECLIPTEK www.ecliptek.com for latest revision Specifications subject to change without notice. PART NUMBERING GUIDE EPS13D2 C 1 H A - 44.736M TR FREQUENCY TOLERANCE & STABILITY/ OPERATING TEMPERATURE RANGE C=±100ppm Maximum over -20°C to +70°C AVAILABLE OPTIONS Blank=Tubes TR=Tape and Reel (Standard) FREQUENCY DUTY CYCLE 1=50% ±10%, 2=50% ±5% SPREAD SPECTRUM PERCENTAGE A = ±0.25% Center Spread G = -0.50% Down Spread B = ±0.50% Center Spread H = -1.00% Down Spread C = ±0.75% Center Spread J = -1.50% Down Spread D = ±1.00% Center Spread L = -2.00% Down Spread E = ±1.50% Center Spread N = -3.00% Down Spread F = ±2.00% Center Spread P = -4.00% Down Spread LOGIC CONTROL/ADDITIONAL OUTPUT H=Tri-State J=Power Down SUGGESTED SOLDER PAD LAYOUT MECHANICAL DIMENSIONS ALL DIMENSIONS IN MILLIMETERS ALL DIMENSIONS IN MILLIMETERS 2.20 ±0.15 5.00 ±0.15 MARKING ORIENTATION 2.0 (X4) 1 4 7.00 ±0.15 2.0 (X4) 1.4 ±0.2 5.08 ±0.15 3.68 ±0.15 2 3 1.60 ±0.20 1.4 ±0.1 Pin 1: Tri-State or Power Down Pin 3: Output Pin 4: Supply Voltage Pin 2: Case Ground TAPE AND REEL DIMENSIONS Solder Land (X4) 3.1 1.6 Tolerances= +0.1 ALL DIMENSIONS IN MILLIMETERS TAPE A 16±.3 B C D E 7.5±.1 6.75±.1 4 ±.1 2±.1 F G H J K 8±.1 A0* 1.5 +.1-0 B0* .3 ±.05 F M N O P Q 1.5 MIN 50 MIN 20.2 MIN 13±.2 40 MIN QTY/REEL 1,000 REEL L K0* R S T U V 2.5 MIN 10 MIN 22.4 MAX 360 MAX 16.4+2-0 *Compliant to EIA 481A ENVIRONMENTAL/MECHANICAL SPECIFICATIONS MARKING SPECIFICATIONS Line 1: ECLIPTEK Characteristic Specification Fine Leak Test Gross Leak Test Mechanical Shock Vibration Solderability Temperature Cycling Resistance to Soldering Heat Resistance to Solvents MIL-STD-883, Method 1014, Condition A MIL-STD-883, Method 1014, Condition C MIL-STD-202, Method 213, Condition C MIL-STD-883, Method 2007, Condition A MIL-STD-883, Method 2002 MIL-STD-883, Method 1010 MIL-STD-202, Method 210 MIL-STD-202, Method 215 Line 2: XX.XXX M Frequency in MHz (5 Digits Maximum + Decimal) Line 3: S XX Y ZZ Week of Year Last Digit of Year Ecliptek Manufacturing Identifier Configuration Designator MANUFACTURER CATEGORY SERIES PACKAGE VOLTAGE CLASS REV.DATE ECLIPTEK CORP. OSCILLATOR EPS13D2 CERAMIC 3.3V OS3G 09/07 800-ECLIPTEK www.ecliptek.com for latest revision Specifications subject to change without notice.