STMICROELECTRONICS FLI30602H-AC

FLI30x02
Single-chip analog TV processor
Data Brief
Features
■
Advanced audio enhancement
■
Digital audio support
■
I2S, SPDIF input
■
I2S, SPDIF output
■
Loud speaker, sub woofer, and headphone
■
Analog line in, microphone in, and line out
■
Tuner noise reduction
■
Triple 10-bit ADC
■
2D video decoder
■
HDMI Rx (in case of FLI30602H)
■
Programmable digital input port (8/16 bits in
FLI30602H and 24 bits in FLI30502)
■
Faroudja DCDi Edge® image enhancement
suite
■
ACM-3D
Application
■
OSD controller
■
LCD TVs
■
Embedded microprocessor
■
Portable or handheld TVs
■
VBI slicer
■
Worldwide SIF audio demodulator
■
Audio processing
September 2008
Rev 1
For further information contact your local STMicroelectronics sales office.
1/7
www.st.com
7
Description
1
FLI30x02
Description
The FLI30x02 ICs are highly integrated solutions for LCD TV and Digital Audio Video
applications. These solutions are capable of meeting global market requirements for: video
and audio decoding and processing, Sound IF demodulation, and HDMI input support. It
provides Faroudja DCDi Edge suite for advanced video and color processing.
The chip incorporates a high-speed triple 10-bit ADC that can capture and process both
video (SDTV or HDTV) and graphics streams. It has a highly programmable video front-end
supporting multiple inputs and connection formats such as RGB, YPrPb, S-Video, CVBS,
and SCART; multi-standard video decoder (NTSC, PAL, SECAM, and all sub formats); and
global VBI standards and services support via VBI Slicer. The embedded microprocessor
and OSD enable full system control without external devices.
The chip supports worldwide TV audio standard demodulation (SIF) including digital audio
(NICAM). It also supports analog line in, line outputs, loudspeaker, sub woofer, and
headphones. The audio DSP supports high end audio processing and enhancement. In
addition, I2S or SPDIF input and output ports with digital processing amplifier enable a full
digital processing pipe for audio thereby supporting smaller area and power for constrained
applications.
HDMI integration is beneficial; it allows both video and audio processing including
5.1 CH to 2 CH audio conversions. The DCDi Edge suite of features, which include Adaptive
Contrast and Color (ACC), ensure full dynamic video range support. The ACM 3D enables
color manipulation for subtle changes in color to improve the image. The chip can also
support DTV front-end with its digital video and audio input ports, thereby ensuring signal
integrity due to full digital processing.
Figure 1.
System diagram
FLI30x02
2/7
FLI30x02
2
Feature attributes
Feature attributes
●
●
Triple 10-bit ADC
–
RGB/YPbPr support up to 160 MHz
–
SCART–RGB + fast blank support
–
Flexible analog front-end
Digital input port
–
●
●
●
●
●
Faroudja DCDi Edge enhancement
–
Eliminates objectionable staircasing
–
Faroudja horizontal enhancement module
–
Adaptive Contrast and Color (ACC)
–
Active Color Management—3D (ACM-3D)
Embedded microprocessor
–
Turbo 186 core
–
Serial or parallel Flash support
–
2-wire slave controller, UART support
–
Internal RESET controller
–
GPIOs, low bandwidth ADC—5-input
–
Infrared receiver interface
Panel or digital output
–
18 or 24-bit TTL output
–
Dual LVDS up to SXGA
–
Energy spectrum management for reducing EMI
2D video decoder
–
Worldwide NTSC/PAL/SECAM support
–
Macrovision™ and VCR trick mode support
VBI slicer
–
●
●
●
8/16/24-bit reconfigurable input port
V-Chip, closed captioning, XDS, CGMS, and WSS decode
–
Teletext 1.5 support
–
10 page (internal) support
–
Extended page support with external SRAM
Scaling engine
–
Independent H and V scaling factors
–
Anamorphic (non-linear) scaling
–
4:2:2 YPbPr or 4:4:4 RGB scaling
OSD controller
–
Up to 4 windows: 1, 2, or 4 bits per pixel color
–
Programmable font scalar to meet teletext requirements
Audio support
–
Two SIF inputs
3/7
Feature attributes
●
4/7
FLI30x02
–
Global audio support—BTSC, A2, NICAM, EIAJ, etc.
–
Audio line in, microphone in, and line out support
–
Loudspeaker, sub woofer, and headphone support
–
Audio DSP
–
Audio enhancement features—pseudo stereo, 5-band graphic equalizer
–
I2S, SPDIF digital audio input and output support
HDMI support (FLI30602H)
–
HDMI 1.2 compliant
–
Backward compatible with DVI 1.0
–
Supports HDCP
FLI30x02
3
Ordering information
Ordering information
Table 1.
Order codes
Part number
Description
FLI30502-AC
256 PQFP
FLI30602H-AC
256 PQFP
In order to meet environmental requirements, ST offers these devices in ECOPACK®
packages. These packages have a lead-free second level interconnect. The category of
second level interconnect is marked on the package and on the inner box label, in
compliance with JEDEC Standard JESD97. The maximum ratings related to soldering
conditions are also marked on the inner box label. ECOPACK is an ST trademark.
ECOPACK specifications are available at www.st.com.
5/7
Revision history
4
FLI30x02
Revision history
Table 2.
6/7
Revision history
Date
Revision
08-Sep-2008
1
Changes
Initial release.
FLI30x02
Please Read Carefully:
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the
right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any
time, without notice.
All ST products are sold pursuant to ST’s terms and conditions of sale.
Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no
liability whatsoever relating to the choice, selection or use of the ST products and services described herein.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this
document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products
or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such
third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED
WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS
OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.
UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT
RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING
APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY,
DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE
GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void
any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any
liability of ST.
ST and the ST logo are trademarks or registered trademarks of ST in various countries.
Information in this document supersedes and replaces all information previously supplied.
The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.
© 2008 STMicroelectronics - All rights reserved
STMicroelectronics group of companies
Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America
www.st.com
7/7