PD-97013A HiRelTM INT-A-Pak 2, PLASTIC HALF-BRIDGE IGBT MODULE G450HHBK06P2 Product Summary Part Number VCE IC VCE(SAT) G450HHBK06P2 600V 450A 1.8 HiRelTM INT-A-Pak 2 The HiRelTM INT-A-Pak series are isolated near hermetic power modules which combine the latest IGBT and Soft Recovery Rectifier Technology. The module uses both high-speed and low Vce(sat) IGBT's packaged for ultra low thermal resistance junction to case. The G450HHBK06P2 power module consists of six IGBT's and six FRED's in a Phase- Leg or Half-Bridge configuration. Features: n Rugged, Lightweight near Hermetic Package with Integrated Power Terminal Cap Gen IV IGBT Technology Soft Recovery Rectifiers Ultra-Low Thermal Resistance Zener Gate Protection Very Low Conduction and Switching Loss -55°C to +125°C Operating Temperature Screening to meet the intent of MIL-PRF-38534 Class H n Short Circuit Capability n 2.0 Ohms Series Gate Resistor n High Altitude Operation, 85,000 Feet Above Sea Level at Rated Voltage n n n n n n n Absolute Maximum Ratings @ Tj=25°C (unless otherwise specified) Symbol Value Collector-to-Emitter Voltage Parameter VCES 600 Gate-to-Emitter Voltage VGE ±20 Continuous Collector Current @ Tc = 25°C Continuous Collector Current @ Tc = 70°C Isolation Voltage www.irf.com IC VISOL 600 450 2500 Units V A VRMS 1 11/08/05 G450HHBK06P2 Electrical Characteristics @ Tj = 25°C (unless otherwise specified) Parameter Off Characteristics Collector Emitter Breakdown Voltage Zero Gate Voltage Collector Current Gate Emitter Leakage Current Symbol Test Conditions VCES VGE = 0V ICES IGES VGE =0V, VCE = 600V VGE = ±15V, VCE = 0V Min. Typ. Max. Units 600 - - 2.0 - - 10 V mA µA 4.0 - 7.5 - 1.8 2.6 On Characteristics Gate Threshold Voltage Collector Emitter Saturation Voltage VGE(TH) VCE = VGE, IC = 45mA VCE(SAT) VGE = 15V, IC = 450A V Dynamic Characteristics Total Gate Charge Input Capacitance Output Capacitance Reverse Transfer Capacitance Qg CIES VCE = 300V, IC = 450A, VGE = 15V - 2,600 - nC COES CRES VGE = 0V, VCE = 25V, f = 1.0MHz - 48 3.0 - nF - 0.3 - - 800 900 - 460 45 700 - 2800 3400 - 400 60 500 - mJ Switching Inductive Load Characteristics Turn-On Delay Time Rise Time Turn-On Losses Turn-Off Delay Time Fall Time Turn-Off Losses td(on) tr Eon td(off) VCC = 300V, IC = 450A, VGE =15V RG(on) = 20Ω, RG(off) =10Ω, L=100µH tf Eoff ns mJ ns Diode Characteristics Forward Voltage VF IF = 450A - 1.2 1.8 V Reverse Recovery Charge Peak Reverse Recovery Current Qrr Irr VR =300V, IC =450A, di/dt =-1100A/µs - 9.5 105 12 - µC A Reverse Recovery Time trr - 160 170 ns 2 www.irf.com G450HHBK06P2 Electrical Characteristics @ Tj = 125°C (unless otherwise specified) Parameter Off Characteristics Symbol Collector Emitter Breakdown Voltage Zero Gate Voltage Collector Current Gate Emitter Leakage Current Test Conditions VCES ICES VGE = 0V VGE =0V, VCE = 600V IGES VGE = ±15V, VCE = 0V Min. Typ. Max. Units 600 - - V - - 18 10 mA µA 4.0 - 1.8 7.5 2.6 V - 1.2 1.8 V On Characteristics Gate Threshold Voltage Collector Emitter Saturation Voltage VGE(TH) VCE = VGE, IC = 45mA VCE(SAT) VGE = 15V, IC = 450A Diode Characteristics VF Forward Voltage IF = 450A Thermal-Mechanical Specifications Parameter Symbol IGBT Thermal Resistance, Junction to Case, per Switch Min Max - 0.07 TJ -55 0.12 150 TSTG -55 125 T - 26 in-lbs - 270 g RthJC Diode Thermal Resistance, Junction to Case, per Switch Operating Junction Temperature Range Storage Temperature Range Screw Torque - Mounting Screw Torque - Terminals Module Weight Units °C/W °C Module Screening Test or Inspection MIL-STD-883 Method Condition Internal Visual 2017 Temperature Cycle 1010 Mechanical Shock Burn-in B 10 Cycles, -55°C to +125°C 2002 B 1500G, 0.5ms, 5 Times (Y1 direction only) 1015 A Final Electrical Test External Visual www.irf.com Comments 160 Hrs @ +125°C Group A, -55°C, +25°C, +125°C 2009 3 G450HHBK06P2 Maximum DC Collector Current (A) Schematic TC, Case Temperature (°C) Fig 1: Maximum Collector Current Vs Case Temperature 4 www.irf.com G450HHBK06P2 90% Vge +Vge Vce Ic 90% Ic 10% Vce Ic 5% Ic td(off) tf Eoff = ∫ t1+5µS Vce ic dt Vcet1Ic dt t1 Fig. 2 - Test Circuit for Measurement of Eon, Fig. 3 - Test Waveforms for Circuit of Fig. 2, Defining Eoff, td(off), tf Eoff, trr, Qrr, Irr, td(on), tr, td(off), tf GATE VOLTAGE D.U.T. 10% +Vg t2 trr Qrr = Ic ∫ trr id Ic dtdt tx +Vg tx 10% Irr 10% Vcc Vcc DUT VOLTAGE AND CURRENT Vce Vpk Irr Vcc 10% Ic 90% Ic Ipk Ic DIODE RECOVERY WAVEFORMS tr td(on) 5% Vce t1 ∫ t2 VceieIcdt dt Eon = Vce t1 t2 DIODE REVERSE RECOVERY ENERGY t3 ∫ t4 Erec = Vd VcidIcdt dt t3 t4 Fig. 3 - Test Waveforms for Circuit of Fig. 2, Fig. 4 - Test Waveforms for Circuit of Fig. 2, Defining Eon, td(on), tr Defining Erec, trr, Qrr, Irr www.irf.com 5 G450HHBK06P2 Case Outline and Dimensions - HiRelTM INT-A-Pak 2 Notes: 1) All dimensions are in inches 2) Unless otherwise specified, Tolerances .XX = ±0.01, .XXX = ±0.005 Part numbering Nomenclature G 450 HH B K 06 P2 H Screening Level P = Unscreened, 25°C Electrical Test ( Not intended for Qualification) H = Screened per MIL-PRF-38534 IGBT Module - Hirel Current Capability Package Type 450 = 450 Amps P2 = HiRel TM INT-A-Pak 2, 2.5" X 4.0" X 1.0" Circuit Configuration Voltage HH = Half Bridge 06 = 600V Generation IGBT / FWD Configuration B = GEN 4 / GEN 3 IGBT Speed / SC Capability K = Fast, SC Capable WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, Tel: (310) 252-7105 IR LEOMINSTER: 205 Crawford St., Leominster, Massachusetts 01453, Tel: (978) 534-5776 Data and specifications subject to change without notice. 11/05 6 www.irf.com