HITTITE HMC286E

HMC286 / 286E
v03.0410
AMPLIFIERS - LOW NOISE - SMT
7
GaAs MMIC LOW NOISE
AMPLIFIER, 2.3 - 2.5 GHz
Typical Applications
Features
The HMC286 / HMC286E is ideal for:
2.4 GHz LNA
• BlueTooth
Noise Figure: 1.7 dB
• Home RF
Gain: 19 dB
• 802.11 WLAN Radios
Single Supply: +3V
• PCMCIA Platforms
No External Components
Ultra Small SOT26 Package
Functional Diagram
General Description
The HMC286 & HMC286E are low cost Low Noise
Amplifiers (LNA) for 2.3 to 2.5 GHz spread spectrum
applications. The LNA provides 19 dB of gain and a
1.7 dB noise figure from a single positive +3V power
supply that consumes only 8.5mA. The typical output
1 dB compression point is +6 dBm at 2.4 GHz. The
compact LNA design utilizes on-chip matching for
repeatable gain and noise figure performance. In
addition, eliminating the external matching circuitry
also reduces the overall size of the LNA function. The
HMC286 & HMC286E were designed to meet the
size constraints of PCMCIA platforms and uses the
SOT26 package that occupies 0.118” x 0.118”, which
makes them a small fully integrated solution that can
be easily implemented with other 2.4 GHz ASICs.
Electrical Specifi cations, TA = +25° C, Vdd= +3V
Parameter
Min.
Frequency Range
Gain
16
0.015
Gain Flatness
±1.25
Noise Figure
1.7
Input Return Loss
12
Output 1 dB Compression (P1dB)
2
Output Third Order Intercept (IP3)
9
Supply Current (Idd)
Max.
Units
GHz
19
Gain Variation Over Temperature
Output Return Loss
7 - 10
Typ.
2.3 - 2.5
dB
0.03
dB/°C
2.5
dB
dB
dB
4.5
dB
6
dBm
12
8.5
dBm
12.5
mA
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or [email protected]
HMC286 / 286E
v03.0410
GaAs MMIC LOW NOISE
AMPLIFIER, 2.3 - 2.5 GHz
4
20
3.5
NOISE FIGURE (dB)
RESPONSE (dB)
15
S21
S11
S22
5
0
-5
-10
-15
2.5
2
1.5
1
0.5
-20
-25
1.6
3
1.8
2
2.2
2.4
2.6
2.8
0
1.6
3
1.8
2
FREQUENCY (GHz)
Gain vs. Temperature
4
23
3.5
NOISE FIGURE (dB)
22
GAIN (dB)
21
20
19
18
+25 C
+85 C
-40 C
16
2.6
2.8
3
+25 C
+85 C
-40 C
3
2.5
2
1.5
1
0.5
15
14
2.2
2.4
Noise Figure vs. Temperature
24
17
2.2
FREQUENCY (GHz)
AMPLIFIERS - LOW NOISE - SMT
25
10
7
Broadband Noise Figure
Broadband Gain & Return Loss
2.3
2.4
2.5
0
2.2
2.6
2.3
FREQUENCY (GHz)
2.4
2.5
2.6
FREQUENCY (GHz)
Input Return Loss vs. Temperature
Output Return Loss vs. Temperature
0
0
-1
+25 C
+85 C
-40 C
-2
RETURN LOSS (dB)
RETURN LOSS (dB)
-5
-10
-15
-3
-4
-5
-6
-7
+25 C
+85 C
-40 C
-8
-20
-9
-25
2.2
2.3
2.4
FREQUENCY (GHz)
2.5
2.6
-10
2.2
2.3
2.4
2.5
2.6
FREQUENCY (GHz)
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or [email protected]
7 - 11
HMC286 / 286E
v03.0410
GaAs MMIC LOW NOISE
AMPLIFIER, 2.3 - 2.5 GHz
7
Output P1dB vs. Temperature
Power Compression @ 2.4 GHz
25
P1dB (dBm)
5
+25 C
+85 C
-40 C
0
15
GAIN
OUTPUT POWER
10
5
0
-5
-5
2.2
2.3
2.4
2.5
-10
-30
2.6
-25
FREQUENCY (GHz)
-20
-15
-10
-5
INPUT POWER (dBm)
Output IP3 vs. Temperature
Reverse Isolation vs. Temperature
-20
REVERSE ISOLATION (dB)
20
15
10
+25 C
+85 C
-40 C
5
0
2.2
2.3
2.4
FREQUENCY (GHz)
7 - 12
POUT (dBm), GAIN (dB)
20
10
THIRD ORDER INTERCEPT (dBm)
AMPLIFIERS - LOW NOISE - SMT
15
2.5
2.6
-25
-30
+25 C
+85 C
-40 C
-35
-40
2.2
2.3
2.4
2.5
2.6
FREQUENCY (GHz)
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or [email protected]
HMC286 / 286E
v03.0410
GaAs MMIC LOW NOISE
AMPLIFIER, 2.3 - 2.5 GHz
Drain Bias Voltage (Vdd)
+7 Vdc
RF Input Power (RFIN)(Vdd = +3 Vdc)
0 dBm
Channel Temperature
150 °C
Continuous Pdiss (T = 85 °C)
(derate 6.35 mW/°C above 85 °C)
0.413 W
Thermal Resistance
(channel to lead)
157 °C/W
Storage Temperature
-65 to +150 °C
Operating Temperature
-40 to +85 °C
ESD Sensitivity (HBM)
Class 1A
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
Outline Drawing
AMPLIFIERS - LOW NOISE - SMT
7
Absolute Maximum Ratings
NOTES:
1. LEADFRAME MATERIAL: COPPER ALLOY
2. DIMENSIONS ARE IN INCHES [MILLIMETERS]
3. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.15mm PER SIDE.
4. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.25mm PER SIDE.
5. ALL GROUND LEADS MUST BE SOLDERED TO PCB RF GROUND.
Package Information
Part Number
Package Body Material
Lead Finish
MSL Rating
HMC286
Low Stress Injection Molded Plastic
Sn/Pb Solder
MSL1
HMC286E
RoHS-compliant Low Stress Injection Molded Plastic
100% matte Sn
MSL1
Package Marking [3]
[1]
H286
XXXX
[2]
286E
XXXX
[1] Max peak reflow temperature of 235 °C
[2] Max peak reflow temperature of 260 °C
[3] 4-Digit lot number XXXX
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or [email protected]
7 - 13
HMC286 / 286E
v03.0410
GaAs MMIC LOW NOISE
AMPLIFIER, 2.3 - 2.5 GHz
AMPLIFIERS - LOW NOISE - SMT
7
7 - 14
Pin Descriptions
Pin Number
Function
Description
1
RFIN
This pin is AC coupled and matched to 50 Ohms.
2, 5, 6
GND
These pins must be connected to RF/DC ground.
3
VDD
Power supply voltage.
4
RFOUT
This pin is AC coupled and matched to 50 Ohms.
Interface Schematic
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or [email protected]
HMC286 / 286E
v03.0410
GaAs MMIC LOW NOISE
AMPLIFIER, 2.3 - 2.5 GHz
7
AMPLIFIERS - LOW NOISE - SMT
Evaluation PCB
List of Materials for Evaluation PCB 103743 [1]
Item
Description
J1, J2
PCB Mount SMA Connector
J3, J4
DC Pin
U1
HMC286 / HMC286E Amplifier
PCB [2]
103741 Evaluation PCB
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Roger 4350
The circuit board used in the application should use
RF circuit design techniques. Signal lines should
have 50 Ohm impedance while the package ground
leads should be connected directly to the ground
plane similar to that shown above. A sufficient
number of via holes should be used to connect
the top and bottom ground planes. The evaluation
circuit board shown is available from Hittite upon
request.
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or [email protected]
7 - 15