HP Series W! E N Hall Effect Pushbutton Switch Pushbutton A Features/Benefits • IP68 sealed • 10,000,000 life cycle • Multiple colored caps • Redundant output available Typical Applications • Harsh environments • Off-Road • Industrial • Medical • Transportation • Joystick control modules • Gaming • Military Specifications Materials FUNCTION: Linear output (See chart on next page) MOUNTING TYPE: Front mount, Rear mount CASE / BUSHING: Anodized Aluminum INSIDE HOUSING: PBT CAP: PBT ACTUATOR: PBT Mechanical MECHANICAL TRAVEL: 0.150 (3.81mm) SHOCK: 60g 11ms sawtooth wave VIBRATION: 10-500Hz 10g max. Operating Environment Electrical SUPPLY VOLTAGE: 5 ± 0.5 VDC SUPPLY CURRENT: 10mA max. OUTPUT CURRENT: 1mA max. OUTPUT VOLTAGE: Programable from 0.5 -4.5V ESD PROTECTION: 16kV per EIA-545 OPERATING TEMPERATURE: -40˚C to 85˚C OPERATING LIFE: 10,000,000 cycles SEALING: IP68S NOTE: Specifications and materials listed above are for switches with standard options. For information on specific and custom switches, please contact Customer Service. Build-A-Switch To order, simply select desired option from each category and place in the appropriate box. H P Designation HP HP Series Hardware 0 No hardware 1 Plated hardware (STD) 2 Stainless hardware Bushing / Mounting Style 1 Front mount, 5/8-24 thread 2 Rear mount, 5/8-24 thread 3 Rear mount, 15/32-32 thread Bushing Finish 1 Clear anodize 2 Black anodize (STD) Cap Style 1 ø .625 Dome (front mount only) 2 ø .370 Flat Sensor Configuration S Single Output D Dual Output, Output 2 mirrors Output 1 (see figure 1) Please contact Customer Service for additional options. Cap Color 1 White 2 Black (STD) 3 Red 4 Orange 5 Yellow Output Voltage Code V1= 1.0V, V2= 4.0V 1 2 V1= 4.0V, V2= 1.0V 3 V1= 0.5V, V2= 4.5V 4 V1= 4.5V, V2= 0.5V Termination Style W 12” wire leads, 22 AWG XLPE (26 AWG for Dual Output) Actuation Force S 2.7lb (12N) Specifications and dimensions subject to change A-116 www.ck-components.com HP Series ! NEW Hall Effect Pushbutton Switch STANDARD VIEW A Pushbutton .725 [ 18,42 ] .625 [ 15,88 ] .520 [ 13,21 ] 5/8-24 UNEF .580 [ 14,73 ] HP11 .620 [ 15,75 ] .875 [ 22,23 ] .875 [ 22,23 ] .250 [ 6,35 ] .370 [ 9,4 ] .370 [ 9,4 ] .250 [ 6,35 ] .250 [ 6,35 ] .370 [ 9,4 ] .187 [ 4,75 ] 5/8-24 UNEF .419 [ 10,64 ] 15/32-32 UNS .325 [ 8,26 ] 5/8-24 UNEF .663 [ 16,84 ] .431 [ 10,95 ] .803 [ 20,4 ] HP22 HP12 HP32 FIGURE 1: OUTPUT VOLTAGE GND 4. 7 n F 4. 7 n F FIGURE 2- SCHEMATIC PIN 1-GND 1, BLACK PU T VDD 1 PIN 2-VDD 1, RED T OU PIN 3-OUT 1, YELLOW PIN 4-GND 2, GREEN TP U T2 V1 GND 4. 7 n F OU 4. 7 n F OUTPUT VOLTAGE (V) OUT V2 OUT 0 PIN 5-VDD 2, PURPLE PIN 6-OUT 2, BLUE .150 ACTUATOR TRAVEL (IN) VDD DUAL OUTPUT ONLY Third Angle Projection Dimensions are shown: Inches (mm) Specifications and dimensions subject to change A-117 www.ck-components.com