SAMSUNG K7A163630B-QI16

K7A163630B
K7A161830B
512Kx36 & 1Mx18 Synchronous SRAM
18Mb Sync. Pipelined Burst SRAM
Specification
100TQFP with Pb / Pb-Free
(RoHS compliant)
INFORMATION IN THIS DOCUMENT IS PROVIDED IN RELATION TO SAMSUNG PRODUCTS,
AND IS SUBJECT TO CHANGE WITHOUT NOTICE.
NOTHING IN THIS DOCUMENT SHALL BE CONSTRUED AS GRANTING ANY LICENSE,
EXPRESS OR IMPLIED, BY ESTOPPEL OR OTHERWISE,
TO ANY INTELLECTUAL PROPERTY RIGHTS IN SAMSUNG PRODUCTS OR TECHNOLOGY.
ALL INFORMATION IN THIS DOCUMENT IS PROVIDED
ON AS "AS IS" BASIS WITHOUT GUARANTEE OR WARRANTY OF ANY KIND.
1. For updates or additional information about Samsung products, contact your nearest Samsung office.
2. Samsung products are not intended for use in life support, critical care, medical, safety equipment, or similar applications where Product failure could result in loss of life or personal or physical harm, or any military
or defense application, or any governmental procurement to which special terms or provisions may apply.
* Samsung Electronics reserves the right to change products or specification without notice.
-1-
Rev. 3.0 April 2006
K7A163630B
K7A161830B
512Kx36 & 1Mx18 Synchronous SRAM
Document Title
512Kx36 & 1Mx18-Bit Synchronous Pipelined Burst SRAM
Revision History
Rev. No.
History
Draft Date
Remark
0.0
1. Initial draft
Mar. 22. 2004
Advance
0.1
1. Update the DC current spec(ICC, ISB)
May. 21. 2004
Preliminary
0.2
1. Change the ISB,ISB1,ISB2
- ISB ; from 120mA to 170mA
- ISB1 ; from 80mA to 150mA
- ISB2 ; from 80mA to 130mA
Sep. 21. 2004
Preliminary
0.3
1. Remove the 1.8V Vdd Voltage level
Oct. 18. 2004
Preliminary
0.4
1. Remove the -14 speed bin
Jan. 04. 2005
Preliminary
1.0
1. Finalize the datasheet
July 18. 2005
Final
2.0
1. Add the overshoot timing
Feb. 16. 2006
Final
3.0
1. Change ordering information
Apr. 03. 2006
Final
-2-
Rev. 3.0 April 2006
K7A163630B
K7A161830B
512Kx36 & 1Mx18 Synchronous SRAM
18Mb SPB (2E1D) Synchronous SRAM Ordering Information
Org.
1Mx18
512Kx36
VDD (V)
Speed (ns)
Access Time (ns)
Part Number
RoHS Avail.
3.3/2.5
4.0
2.6
K7A161830B-P(Q)1C(I)225
√
3.3/2.5
6.0
3.5
K7A161830B-P(Q) C(I) 16
√
3.3/2.5
4.0
2.6
K7A163630B-P(Q)1C(I)225
√
3.3/2.5
6.0
3.5
K7A163630B-P(Q)1C(I)216
√
1
2
Note 1. P(Q) [Package type] : P-Pb Free, Q-Pb
2. C(I) [Operating Temperature] : C-Commercial, I-Industrial
-3-
Rev. 3.0 April 2006
K7A163630B
K7A161830B
512Kx36 & 1Mx18 Synchronous SRAM
512Kx36 & 1Mx18-Bit Synchronous Pipelined Burst SRAM
FEATURES
GENERAL DESCRIPTION
• Synchronous Operation.
• 2 Stage Pipelined operation with 4 Burst.
• On-Chip Address Counter.
• Self-Timed Write Cycle.
• On-Chip Address and Control Registers.
• VDD= 2.5 or 3.3V +/- 5% Power Supply.
• 5V Tolerant Inputs Except I/O Pins.
• Byte Writable Function.
• Global Write Enable Controls a full bus-width write.
• Power Down State via ZZ Signal.
• LBO Pin allows a choice of either a interleaved burst or a linear
burst.
• Three Chip Enables for simple depth expansion with No Data Contention only for TQFP ; 2cycle Enable, 1cycle Disable.
• Asynchronous Output Enable Control.
• ADSP, ADSC, ADV Burst Control Pins.
• TTL-Level Three-State Output.
• 100-TQFP-1420A (Lead and Lead free package)
• Operating in commeical and industrial temperature range.
The K7A163630B and K7A161830B are 18,874,368-bit
Synchronous Static Random Access Memory designed for
high performance second level cache of Pentium and
Power PC based System.
It is organized as 512K(1M) words of 36(18) bits and integrates address and control registers, a 2-bit burst address
counter and added some new functions for high performance cache RAM applications; GW, BW, LBO, ZZ. Write
cycles are internally self-timed and synchronous.
Full bus-width write is done by GW, and each byte write is
performed by the combination of WEx and BW when GW is
high. And with CS1 high, ADSP is blocked to control signals.
Burst cycle can be initiated with either the address status
processor (ADSP) or address status cache controller
(ADSC) inputs. Subsequent burst addresses are generated
internally in the system′s burst sequence and are controlled by the burst address advance(ADV) input.
LBO pin is DC operated and determines burst sequence
(linear or interleaved).
ZZ pin controls Power Down State and reduces Stand-by
current regardless of CLK.
The K7A163630B and K7A161830B are fabricated using
SAMSUNG′s high performance CMOS technology and is
available in a 100pin TQFP. Multiple power and ground
pins are utilized to minimize ground bounce.
FAST ACCESS TIMES
Symbol
-25
-16
Unit
Cycle Time
PARAMETER
tCYC
4.0
6.0
ns
Clock Access Time
tCD
2.6
3.5
ns
Output Enable Access Time
tOE
2.6
3.5
ns
LOGIC BLOCK DIAGRAM
CLK
LBO
BURST CONTROL
LOGIC
CONTROL
REGISTER
ADV
ADSC
A0~A1
A0~A18
or A0~A19
ADSP
ADDRESS
REGISTER
512Kx36, 1Mx18
MEMORY
ARRAY
A′0~A′1
A2~A18
or A2~A19
DATA-IN
REGISTER
CONTROL
REGISTER
CS1
CS2
CS2
GW
BW
WEx
(x=a,b,c,d or a,b)
BURST
ADDRESS
COUNTER
OUTPUT
REGISTER
CONTROL
LOGIC
BUFFER
OE
ZZ
DQa0 ~ DQd7 or DQa0 ~ DQb7
DQPa,DQPb
DQPa ~ DQPd
-4-
Rev. 3.0 April 2006
K7A163630B
K7A161830B
512Kx36 & 1Mx18 Synchronous SRAM
CLK
GW
BW
OE
ADSC
ADSP
ADV
A8
A9
88
87
86
85
84
83
82
81
WEa
VSS
WEb
93
89
WEc
94
90
WEd
95
CS2
CS2
96
VDD
CS1
97
91
A7
98
92
A6
99
100 Pin TQFP
(20mm x 14mm)
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
A4
A3
A2
A1
A0
N.C.
N.C.
VSS
VDD
A18
A17
A10
A11
A12
A13
A14
A15
A16
K7A163630B(512Kx36)
A5
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
LBO
NC/DQPc
DQc0
DQc1
VDDQ
VSSQ
DQc2
DQc3
DQc4
DQc5
VSSQ
VDDQ
DQc6
DQc7
N.C.
VDD
N.C.
VSS
DQd0
DQd1
VDDQ
VSSQ
DQd2
DQd3
DQd4
DQd5
VSSQ
VDDQ
DQd6
DQd7
NC/DQPd
100
PIN CONFIGURATION(TOP VIEW)
80
79
78
77
76
75
74
73
72
71
70
69
68
67
66
65
64
63
62
61
60
59
58
57
56
55
54
53
52
51
DQPb/NC
DQb7
DQb6
VDDQ
VSSQ
DQb5
DQb4
DQb3
DQb2
VSSQ
VDDQ
DQb1
DQb0
VSS
N.C.
VDD
ZZ
DQa7
DQa6
VDDQ
VSSQ
DQa5
DQa4
DQa3
DQa2
VSSQ
VDDQ
DQa1
DQa0
DQPa/NC
PIN NAME
SYMBOL
PIN NAME
TQFP PIN NO.
32,33,34,35,36,37,42
43,44,45,46,47,48,49
50,81,82,99,100
83
ADV
Burst Address Advance
Address Status Processor 84
ADSP
Address Status Controller 85
ADSC
89
Clock
CLK
98
Chip Select
CS1
97
Chip Select
CS2
92
Chip Select
CS2
93,94,95,96
WEx(x=a,b,c,d) Byte Write Inputs
86
Output Enable
OE
88
Global Write Enable
GW
87
Byte Write Enable
BW
64
Power Down Input
ZZ
31
Burst Mode Control
LBO
A0 - A18
Address Inputs
SYMBOL
PIN NAME
TQFP PIN NO.
VDD
VSS
Power Supply(+3.3V)
Ground
15,41,65,91
17,40,67,90
N.C.
No Connect
14,16,38,39,66
DQa0~a7
DQb0~b7
DQc0~c7
DQd0~d7
DQPa~Pd
or N.C
Data Inputs/Outputs
52,53,56,57,58,59,62,63
68,69,72,73,74,75,78,79
2,3,6,7,8,9,12,13
18,19,22,23,24,25,28,29
51,80,1,30
VDDQ
Output Power Supply
(3.3V or 2.5V)
Output Ground
4,11,20,27,54,61,70,77
VSSQ
5,10,21,26,55,60,71,76
Note : 1. A0 and A1 are the two least significant bits(LSB) of the address field and set the internal burst counter if burst is desired.
-5-
Rev. 3.0 April 2006
K7A163630B
K7A161830B
512Kx36 & 1Mx18 Synchronous SRAM
ADSP
ADV
A8
A9
83
82
81
48
49
50
A15
A16
A17
ADSC
84
47
A14
OE
85
46
A13
BW
86
45
A12
GW
87
44
A11
CLK
88
43
A18
VSS
89
WEa
90
WEb
93
42
N.C.
94
A19
N.C.
95
CS2
CS2
96
VDD
CS1
97
91
A7
98
92
A6
99
100 Pin TQFP
(20mm x 14mm)
31
32
33
34
35
36
37
38
39
40
41
A4
A3
A2
A1
A0
N.C.
N.C.
VSS
VDD
K7A161830B(1Mx18)
A5
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
LBO
N.C.
N.C.
N.C.
VDDQ
VSSQ
N.C.
N.C.
DQb0
DQb1
VSSQ
VDDQ
DQb2
DQb3
N.C.
VDD
N.C.
VSS
DQb4
DQb5
VDDQ
VSSQ
DQb6
DQb7
DQPb
N.C.
VSSQ
VDDQ
N.C.
N.C.
N.C.
100
PIN CONFIGURATION(TOP VIEW)
80
79
78
77
76
75
74
73
72
71
70
69
68
67
66
65
64
63
62
61
60
59
58
57
56
55
54
53
52
51
A10
N.C.
N.C.
VDDQ
VSSQ
N.C.
DQPa
DQa7
DQa6
VSSQ
VDDQ
DQa5
DQa4
VSS
N.C.
VDD
ZZ
DQa3
DQa2
VDDQ
VSSQ
DQa1
DQa0
N.C.
N.C.
VSSQ
VDDQ
N.C.
N.C.
N.C.
PIN NAME
SYMBOL
PIN NAME
A0 - A19
Address Inputs
ADV
ADSP
ADSC
CLK
CS1
CS2
CS2
WEx(x=a,b)
OE
GW
BW
ZZ
LBO
Burst Address Advance
Address Status Processor
Address Status Controller
Clock
Chip Select
Chip Select
Chip Select
Byte Write Inputs
Output Enable
Global Write Enable
Byte Write Enable
Power Down Input
Burst Mode Control
TQFP PIN NO.
SYMBOL
32,33,34,35,36,37,42
43,44,45,46,47,48,49
50 80,81,82,99,100
83
84
85
89
98
97
92
93,94
86
88
87
64
31
PIN NAME
TQFP PIN NO.
VDD
VSS
Power Supply(+3.3V)
Ground
15,41,65,91
17,40,67,90
N.C.
No Connect
1,2,3,6,7,14,16,25,28,29
30,38,39,51,52,53,56,57
66,75,78,79,95,96
DQa0 ~ a7
DQb0 ~ b7
DQPa, Pb
Data Inputs/Outputs
58,59,62,63,68,69,72,73
8,9,12,13,18,19,22,23
74,24
VDDQ
Output Power Supply
(3.3V or 2.5V)
Output Ground
4,11,20,27,54,61,70,77
VSSQ
5,10,21,26,55,60,71,76
Note : 1. A0 and A1 are the two least significant bits(LSB) of the address field and set the internal burst counter if burst is desired.
-6-
Rev. 3.0 April 2006
K7A163630B
K7A161830B
512Kx36 & 1Mx18 Synchronous SRAM
FUNCTION DESCRIPTION
The K7A163630B and K7A161830B are synchronous SRAM designed to support the burst address accessing sequence of the
Power PC based microprocessor. All inputs (with the exception of OE, LBO and ZZ) are sampled on rising clock edges. The start and
duration of the burst access is controlled by ADSC, ADSP and ADV and chip select pins.
The accesses are enabled with the chip select signals and output enabled signals. Wait states are inserted into the access with ADV.
When ZZ is pulled high, the SRAM will enter a Power Down State. At this time, internal state of the SRAM is preserved. When ZZ
returns to low, the SRAM normally operates after 2cycles of wake up time. ZZ pin is pulled down internally.
Read cycles are initiated with ADSP(regardless of WEx and ADSC)using the new external address clocked into the on-chip address
register whenever ADSP is sampled low, the chip selects are sampled active, and the output buffer is enabled with OE. In read operation the data of cell array accessed by the current address, registered in the Data-out registers by the positive edge of CLK, are carried to the Data-out buffer by the next positive edge of CLK. The data, registered in the Data-out buffer, are projected to the output
pins. ADV is ignored on the clock edge that samples ADSP asserted, but is sampled on the subsequent clock edges. The address
increases internally for the next access of the burst when WEx are sampled High and ADV is sampled low. And ADSP is blocked to
control signals by disabling CS1.
All byte write is done by GW(regaedless of BW and WEx.), and each byte write is performed by the combination of BW and WEx
when GW is high.
Write cycles are performed by disabling the output buffers with OE and asserting WEx. WEx are ignored on the clock edge that samples ADSP low, but are sampled on the subsequent clock edges. The output buffers are disabled when WEx are sampled
Low(regaedless of OE). Data is clocked into the data input register when WEx sampled Low. The address increases internally to the
next address of burst, if both WEx and ADV are sampled Low. Individual byte write cycles are performed by any one or more byte
write enable signals(WEa, WEb, WEc or WEd) sampled low. The WEa control DQa0 ~ DQa7 and DQPa, WEb controls DQb0 ~ DQb7
and DQPb, WEc controls DQc0 ~ DQc7 and DQPc, and WEd control DQd0 ~ DQd7 and DQPd. Read or write cycle may also be initiated with ADSC, instead of ADSP. The differences between cycles initiated with ADSC and ADSP as are follows;
ADSP must be sampled high when ADSC is sampled low to initiate a cycle with ADSC.
WEx are sampled on the same clock edge that sampled ADSC low(and ADSP high).
Addresses are generated for the burst access as shown below, The starting point of the burst sequence is provided by the external
address. The burst address counter wraps around to its initial state upon completion. The burst sequence is determined by the state
of the LBO pin. When this pin is Low, linear burst sequence is selected. When this pin is High, Interleaved burst sequence is
selected.
BURST SEQUENCE TABLE
LBO PIN
(Interleaved Burst)
Case 1
HIGH
A1
0
0
1
1
First Address
Fourth Address
Case 2
A0
0
1
0
1
A1
0
0
1
1
Case 3
A0
1
0
1
0
A1
1
1
0
0
Case 4
A0
0
1
0
1
A1
1
1
0
0
BQ TABLE
LBO PIN
A0
1
0
1
0
(Linear Burst)
Case 1
LOW
A1
0
0
1
1
First Address
Fourth Address
Case 2
A0
0
1
0
1
A1
0
1
1
0
Case 3
A0
1
0
1
0
A1
1
1
0
0
Case 4
A0
0
1
0
1
A1
1
0
0
1
A0
1
0
1
0
Note : 1. LBO pin must be tied to High or Low, and Floating State must not be allowed.
ASYNCHRONOUS TRUTH TABLE
Operation
ZZ
OE
I/O STATUS
Sleep Mode
H
X
High-Z
L
L
DQ
Read
L
H
High-Z
Write
L
X
Din, High-Z
Deselected
L
X
High-Z
Notes
1. X means "Don′t Care".
2. ZZ pin is pulled down internally
3. For write cycles that following read cycles, the output buffers must be
disabled with OE, otherwise data bus contention will occur.
4. Sleep Mode means power down state of which stand-by current does
not depend on cycle time.
5. Deselected means power down state of which stand-by current
depends on cycle time.
-7-
Rev. 3.0 April 2006
K7A163630B
K7A161830B
512Kx36 & 1Mx18 Synchronous SRAM
TRUTH TABLES
SYNCHRONOUS TRUTH TABLE
CS1
CS2
CS2
H
X
X
ADSP ADSC
X
L
ADV
WRITE
CLK
ADDRESS ACCESSED
OPERATION
X
X
↑
N/A
Not Selected
L
L
X
L
X
X
X
↑
N/A
Not Selected
L
X
H
L
X
X
X
↑
N/A
Not Selected
L
L
X
X
L
X
X
↑
N/A
Not Selected
L
X
H
X
L
X
X
↑
N/A
Not Selected
L
H
L
L
X
X
X
↑
External Address
Begin Burst Read Cycle
L
H
L
H
L
X
L
↑
External Address
Begin Burst Write Cycle
L
H
L
H
L
X
H
↑
External Address
Begin Burst Read Cycle
X
X
X
H
H
L
H
↑
Next Address
Continue Burst Read Cycle
H
X
X
X
H
L
H
↑
Next Address
Continue Burst Read Cycle
X
X
X
H
H
L
L
↑
Next Address
Continue Burst Write Cycle
H
X
X
X
H
L
L
↑
Next Address
Continue Burst Write Cycle
X
X
X
H
H
H
H
↑
Current Address
Suspend Burst Read Cycle
H
X
X
X
H
H
H
↑
Current Address
Suspend Burst Read Cycle
X
X
X
H
H
H
L
↑
Current Address
Suspend Burst Write Cycle
H
X
X
X
H
H
L
↑
Current Address
Suspend Burst Write Cycle
Notes : 1. X means "Don′t Care".
2. The rising edge of clock is symbolized by ↑.
3. WRITE = L means Write operation in WRITE TRUTH TABLE.
WRITE = H means Read operation in WRITE TRUTH TABLE.
4. Operation finally depends on status of asynchronous input pins(ZZ and OE).
WRITE TRUTH TABLE(x36)
GW
BW
WEa
WEb
WEc
WEd
OPERATION
H
H
X
X
X
X
READ
H
L
H
H
H
H
READ
H
L
L
H
H
H
WRITE BYTE a
H
L
H
L
H
H
WRITE BYTE b
H
L
H
H
L
L
WRITE BYTE c and d
H
L
L
L
L
L
WRITE ALL BYTEs
L
X
X
X
X
X
WRITE ALL BYTEs
Notes : 1. X means "Don′t Care".
2. All inputs in this table must meet setup and hold time around the rising edge of CLK(↑).
WRITE TRUTH TABLE(x18)
GW
BW
WEa
WEb
OPERATION
H
H
X
X
READ
H
L
H
H
READ
H
L
L
H
WRITE BYTE a
H
L
H
L
WRITE BYTE b
H
L
L
L
WRITE ALL BYTEs
L
X
X
X
WRITE ALL BYTEs
Notes : 1. X means "Don′t Care".
2. All inputs in this table must meet setup and hold time around the rising edge of CLK(↑).
-8-
Rev. 3.0 April 2006
K7A163630B
K7A161830B
512Kx36 & 1Mx18 Synchronous SRAM
ABSOLUTE MAXIMUM RATINGS*
PARAMETER
SYMBOL
RATING
UNIT
Voltage on VDD Supply Relative to VSS
VDD
-0.3 to 4.6
V
Voltage on VDDQ Supply Relative to VSS
VDDQ
VDD
V
Voltage on Input Pin Relative to VSS
VIN
-0.3 to VDD+0.3
V
Voltage on I/O Pin Relative to VSS
VIO
-0.3 to VDDQ+0.3
V
Power Dissipation
PD
1.6
W
Storage Temperature
Commercial
Operating Temperature
Industrial
Storage Temperature Range Under Bias
TSTG
-65 to 150
°C
TOPR
0 to 70
°C
TOPR
-40 to 85
°C
TBIAS
-10 to 85
°C
*Note : Stresses greater than those listed under "Absolute Maximum Ratings" may cause permanent damage to the device. This is a stress rating only
and functional operation of the device at these or any other conditions above those indicated in the operating sections of this specification is not
implied. Exposure to absolute maximum rating conditions for extended periods may affect reliability.
OPERATING CONDITIONS (0°C ≤ TA ≤ 70°C)
PARAMETER
Supply Voltage
SYMBOL
MIN
Typ.
MAX
UNIT
VDD1
2.375
2.5
2.625
V
VDDQ1
2.375
2.5
2.625
V
VDD2
3.135
3.3
3.465
V
VDDQ2
3.135
3.3
3.465
V
VSS
0
0
0
V
Ground
Notes: 1. The above parameters are also guaranteed at industrial temperature range.
2. It should be VDDQ ≤ VDD.
CAPACITANCE*(TA=25°C, f=1MHz)
PARAMETER
SYMBOL
TEST CONDITION
MIN
MAX
UNIT
CIN
VIN=0V
-
5
pF
COUT
VOUT=0V
-
6
pF
Input Capacitance
Output Capacitance
*Note : Sampled not 100% tested.
Overshoot Timing
Undershoot Timing
20% tCYC(MIN)
VIH
VDDQ+1.0V
VDDQ+0.5V
VSS
VDDQ
VSS-0.5V
VSS-1.0V
20% tCYC(MIN)
VIL
-9-
Rev. 3.0 April 2006
K7A163630B
K7A161830B
512Kx36 & 1Mx18 Synchronous SRAM
DC ELECTRICAL CHARACTERISTICS
PARAMETER
SYMBOL
TEST CONDITIONS
MIN
MAX
UNIT
Input Leakage Current(except ZZ)
IIL
VDD = Max ; VIN=VSS to VDD
-2
+2
µA
Output Leakage Current
IOL
Output Disabled, VOUT=VSS to VDDQ
-2
+2
µA
Operating Current
ICC
Device Selected, IOUT=0mA,
ZZ≤VIL , Cycle Time ≥ tCYC Min
-25
-
360
-16
-
300
Device deselected, IOUT=0mA,
-25
-
170
-16
-
170
ISB
ZZ≤VIL, f=Max,
All Inputs≤0.2V or ≥ VDD-0.2V
mA
1,2
mA
ISB1
Device deselected, IOUT=0mA, ZZ≤0.2V,
f = 0, All Inputs=fixed (VDD-0.2V or 0.2V)
-
150
mA
ISB2
Device deselected, IOUT=0mA, ZZ≥VDD-0.2V,
f=Max, All Inputs≤VIL or ≥VIH
-
130
mA
Output Low Voltage(3.3V I/O)
VOL
IOL=8.0mA
-
0.4
V
Output High Voltage(3.3V I/O)
VOH
IOH=-4.0mA
2.4
-
V
Output Low Voltage(2.5V I/O)
VOL
IOL=1.0mA
-
0.4
V
Output High Voltage(2.5V I/O)
VOH
IOH=-1.0mA
2.0
-
V
Standby Current
NOTES
Input Low Voltage(3.3V I/O)
VIL
-0.3*
0.8
V
nput High Voltage(3.3V I/O)
VIH
2.0
VDD+0.3**
V
Input Low Voltage(2.5V I/O)
VIL
-0.3*
0.7
V
Input High Voltage(2.5V I/O)
VIH
1.7
VDD+0.3**
V
3
3
Notes : 1. The above parameters are also guaranteed at industrial temperature range.
2. Reference AC Operating Conditions and Characteristics for input and timing.
3. Data states are all zero.
4. In Case of I/O Pins, the Max. VIH=VDDQ+0.3V.
TEST CONDITIONS
PARAMETER
Input Pulse Level(for 3.3V I/O)
Input Pulse Level(for 2.5V I/O)
Input Rise and Fall Time(Measured at 20% to 80% for 3.3/2.5V I/O)
Input and Output Timing Reference Levels for 3.3V I/O
Input and Output Timing Reference Levels for 2.5V I/O
Output Load
VALUE
0 to 3.0V
0 to 2.5V
1.0V/ns
1.5V
VDDQ/2
See Fig. 1
* The above parameters are also guaranteed at industrial temperature range.
- 10 -
Rev. 3.0 April 2006
K7A163630B
K7A161830B
512Kx36 & 1Mx18 Synchronous SRAM
Output Load(B),
(for tLZC, tLZOE, tHZOE & tHZC)
+3.3V for 3.3V I/O
/+2.5V for 2.5V I/O
Output Load(A)
RL=50Ω
Dout
VL=1.5V for 3.3V I/O
VDDQ/2 for 2.5V I/O
Zo=50Ω
319Ω / 1667Ω
Dout
353Ω / 1538Ω
5pF*
* Including Scope and Jig Capacitance
Fig. 1
AC TIING CHARACTERISTICS
Parameter
Symbol
-25
MIN
-16
MAX
Min
Max
Unit
Cycle Time
tCYC
4.0
-
6.0
-
ns
Clock Access Time
tCD
-
2.6
-
3.5
ns
Output Enable to Data Valid
tOE
-
2.6
-
3.5
ns
Clock High to Output Low-Z
tLZC
0
-
0
-
ns
tOH
1.5
-
1.5
-
ns
Output Enable Low to Output Low-Z
tLZOE
0
-
0
-
ns
Output Hold from Clock High
Output Enable High to Output High-Z
tHZOE
-
2.6
-
3.0
ns
Clock High to Output High-Z
tHZC
1.5
2.6
1.5
3.0
ns
Clock High Pulse Width
tCH
1.7
-
2.1
-
ns
Clock Low Pulse Width
tCL
1.7
-
2.1
-
ns
Address Setup to Clock High
tAS
1.2
-
1.5
-
ns
Address Status Setup to Clock High
tSS
1.2
-
1.5
-
ns
Data Setup to Clock High
tDS
1.2
-
1.5
-
ns
Write Setup to Clock High (GW, BW, WEX)
tWS
1.2
-
1.5
-
ns
Address Advance Setup to Clock High
tADVS
1.2
-
1.5
-
ns
Chip Select Setup to Clock High
tCSS
1.2
-
1.5
-
ns
Address Hold from Clock High
tAH
0.3
-
0.5
-
ns
Address Status Hold from Clock High
tSH
0.3
-
0.5
-
ns
Data Hold from Clock High
tDH
0.3
-
0.5
-
ns
Write Hold from Clock High (GW, BW, WEX)
tWH
0.3
-
0.5
-
ns
Address Advance Hold from Clock High
tADVH
0.3
-
0.5
-
ns
Chip Select Hold from Clock High
tCSH
0.3
-
0.5
-
ns
ZZ High to Power Down
tPDS
2
-
2
-
cycle
ZZ Low to Power Up
tPUS
2
-
2
-
cycle
Notes : 1. The above parameters are also guaranteed at industrial temperature range.
2. All address inputs must meet the specified setup and hold times for all rising clock edges whenever ADSC and/or ADSP is sampled low and CS
is sampled low. All other synchronous inputs must meet the specified setup and hold times whenever this device is chip selected.
3. Both chip selects must be active whenever ADSC or ADSP is sampled low in order for the this device to remain enabled.
4. ADSC or ADSP must not be asserted for at least 2 Clock after leaving ZZ state.
- 11 -
Rev. 3.0 April 2006
- 12 -
Data Out
OE
ADV
CS
WRITE
ADDRESS
ADSC
ADSP
CLOCK
tCSS
tAS
tSS
A1
tADVS
tCSH
tWS
tAH
tSH
Q1-1
A2
tHZOE
tSH
Q2-1
tCD
tOH
Q2-2
A3
Q2-3
(ADV INSERTS WAIT STATE)
BURST CONTINUED WITH
NEW BASE ADDRESS
NOTES : WRITE = L means GW = L, or GW = H, BW = L, WEx = L
CS = L means CS1 = L, CS2 = H and CS2 = L
CS = H means CS1 = H, or CS1 = L and CS2 = H, or CS1 = L, and CS2 = L
tLZOE
tOE
tADVH
tWH
tSS
tCL
tCYC
tCH
TIMING WAVEFORM OF READ CYCLE
Q2-4
Q3-1
Q3-2
Q3-3
Undefined
Don′t Care
Q3-4
tHZC
K7A163630B
K7A161830B
512Kx36 & 1Mx18 Synchronous SRAM
Rev. 3.0 April 2006
- 13 -
Data Out
Data In
OE
ADV
CS
WRITE
ADDRESS
ADSC
ADSP
CLOCK
Q0-3
tCSS
tAS
tSS
Q0-4
A1
tHZOE
tCSH
tAH
tSH
D1-1
tCL
tCYC
tCH
A2
D2-1
D2-2
(ADV SUSPENDS BURST)
D2-2
D2-3
(ADSC EXTENDED BURST)
TIMING WAVEFORM OF WRTE CYCLE
D2-4
D3-1
A3
tDS
tADVS
tWS
tSS
D3-2
tDH
tADVH
tWH
tSH
D3-3
Undefined
Don′t Care
D3-4
K7A163630B
K7A161830B
512Kx36 & 1Mx18 Synchronous SRAM
Rev. 3.0 April 2006
- 14 -
Data Out
Data In
OE
ADV
CS
WRITE
ADDRESS
ADSP
CLOCK
tHZC
tSS
A1
tSH
tCD
tLZC
tAS
Q1-1
A2
tCL
tHZOE
tDS
tADVS
tWS
tAH
tCYC
tCH
D2-1
tDH
tADVH
tWH
A3
tLZOE
Q3-1
Q3-2
tOH
Q3-3
TIMING WAVEFORM OF COMBINATION READ/WRTE CYCLE(ADSP CONTROLLED , ADSC=HIGH)
Undefined
Don′t Care
Q3-4
K7A163630B
K7A161830B
512Kx36 & 1Mx18 Synchronous SRAM
Rev. 3.0 April 2006
- 15 -
Data In
Data Out
OE
ADV
CS
WRITE
ADDRESS
ADSC
CLOCK
tCSS
tSS
A1
tCSH
tSH
tOE
tLZOE
A2
Q1-1
A3
Q2-1
A4
Q3-1
Q4-1
tHZOE
D5-1
A5
tDS
tWS
D6-1
A6
tDH
tWH
D7-1
A7
tCL
tWS
tCYC
tCH
A8
tLZOE
tWH
A9
TIMING WAVEFORM OF SINGLE READ/WRITE CYCLE(ADSC CONTROLLED , ADSP=HIGH)
Q8-1
Undefined
Don′t Care
Q9-1
tOH
K7A163630B
K7A161830B
512Kx36 & 1Mx18 Synchronous SRAM
Rev. 3.0 April 2006
- 16 -
ZZ
Data Out
Data In
OE
ADV
CS
WRITE
ADDRESS
ADSC
ADSP
CLOCK
tCSS
tAS
tSS
A1
tCSH
tAH
tSH
tLZOE
tOE
Q1-1
ZZ Setup Cycle
tPDS
tHZC
Sleep State
ZZ Recovery Cycle
tPUS
tCL
tCYC
tCH
TIMING WAVEFORM OF POWER DOWN CYCLE
tWS
Normal Operation Mode
tHZOE
A2
D2-1
tWH
Undefined
Don′t Care
D2-2
K7A163630B
K7A161830B
512Kx36 & 1Mx18 Synchronous SRAM
Rev. 3.0 April 2006
K7A163630B
K7A161830B
512Kx36 & 1Mx18 Synchronous SRAM
APPLICATION INFORMATION
DEPTH EXPANSION
The Samsung 512Kx36 Synchronous Pipelined Burst SRAM has two additional chip selects for simple depth expansion.
This permits easy secondary cache upgrades from 512K depth to 1M depth without extra logic.
I/O[0:71]
Data
Address
A[0:19]
A[19]
A[0:18]
A[19]
A[0:18]
Address Data
Address Data
CLK
CS2
CS2
CS2
CS2
512Kx36
SPB
SRAM
CLK
Microprocessor
Address
ADSC
CLK
WEx
ADSC
WEx
(Bank 0)
OE
Cache
Controller
CLK
512Kx36
SPB
SRAM
(Bank 1)
OE
CS1
CS1
ADV
ADV
ADSP
ADSP
ADS
INTERLEAVE READ TIMING (Refer to non-interleave write timing for interleave write timing)
(ADSP CONTROLLED , ADSC=HIGH)
Clock
tSS
tSH
ADSP
tAS
ADDRESS
[0:n]
A1
tAH
A2
tWS
tWH
WRITE
tCSS
tCSH
CS1
Bank 0 is selected by CS2, and Bank 1 deselected by CS2
An+1
tADVS
tADVH
Bank 0 is deselected by CS2, and Bank 1 selected by CS2
ADV
OE
Data Out
(Bank 0)
Data Out
(Bank 1)
tLZOE
tOE
tHZC
Q1-1
Q1-2
Q1-3
Q1-4
tCD
tLZC
Q2-1
*Notes : n = 14 32K depth ,
16 128K depth ,
18 512K depth ,
15 64K depth
17 256K depth
19 1M depth
- 17 -
Q2-2
Q2-3
Don′t Care
Q2-4
Undefined
Rev. 3.0 April 2006
K7A163630B
K7A161830B
512Kx36 & 1Mx18 Synchronous SRAM
APPLICATION INFORMATION
DEPTH EXPANSION
The Samsung 1Mx18 Synchronous Pipelined Burst SRAM has two additional chip selects for simple depth expansion.
This permits easy secondary cache upgrades from 1M depth to 2M depth without extra logic.
I/O[0:71]
Data
Address
A[20]
A[0:20]
A[20]
A[0:19]
Address Data
Address Data
CLK
Microprocessor
CS2
CS2
CS2
CS2
1Mx18
SPB
SRAM
CLK
Address
ADSC
CLK
WEx
1Mx18
SPB
SRAM
CLK
ADSC
WEx
(Bank 0)
OE
Cache
Controller
A[0:19]
(Bank 1)
OE
CS1
CS1
ADV
ADV
ADSP
ADSP
ADS
INTERLEAVE READ TIMING (Refer to non-interleave write timing for interleave write timing)
(ADSP CONTROLLED , ADSC=HIGH)
Clock
tSS
tSH
ADSP
tAS
ADDRESS
[0:n]
tAH
A1
A2
tWS
tWH
WRITE
tCSS
tCSH
CS1
Bank 0 is selected by CS2, and Bank 1 deselected by CS2
An+1
tADVS
Bank 0 is deselected by CS2, and Bank 1 selected by CS2
tADVH
ADV
OE
tOE
Data Out
(Bank 0)
Data Out
(Bank 1)
tLZOE
tHZC
Q1-1
Q1-2
Q1-3
Q1-4
tCD
tLZC
*Notes : n = 14
16
18
20
32K depth ,
128K depth ,
512K depth ,
2M depth
15 64K depth
17 256K depth
19 1M depth
Q2-1
Q2-2
Undefined
- 18 -
Q2-3
Q2-4
Don′t Care
Rev. 3.0 April 2006
K7A163630B
K7A161830B
512Kx36 & 1Mx18 Synchronous SRAM
PACKAGE DIMENSIONS
100-TQFP-1420A (Lead and Lead free package)
Units ; millimeters/Inches
0~8°
22.00 ±0.30
0.127 +- 0.10
0.05
20.00 ±0.20
16.00 ±0.30
14.00 ±0.20
0.10 MAX
(0.83)
0.50 ±0.10
#1
0.65
(0.58)
0.30 ±0.10
0.10 MAX
1.40 ±0.10 1.60 MAX
0.50 ±0.10
- 19 -
0.05 MIN
Rev. 3.0 April 2006