KYL KYL-210

zhen KYL Communication Equipment Co
., Ltd
Shen
Shenz
Co.
KYL-210 High speed Rate RF
Transceiver Data Module
Shenzhen KYL Communication Equipment Co., Ltd
Add: 3705-3707, Building C, Huangdu Square (South of Shenzhen Exhibition
Center),Yitian Road, Futian District, Shenzhen, Guangdong, China
518048
Tel: 86-755-82943662
Fax: 86-755-83408785
Skype
Skype:KYL-Sunny
Yahoo: [email protected]
MSN: [email protected]
Email: [email protected]
Web: www.rf-data.com
Fax: +86-755-83408785
[email protected]
www.rf-data.com
zhen KYL Communication Equipment Co
., Ltd
Shen
Shenz
Co.
I: About KYL-210
KYL-210, low power wireless transceiver data module, narrow-band, UHF, channel
spacing as low as 25 KHz.
II: Data Sheet of KYL-210
KYL-210::
PERFORMANCE
Power Output:
50mW
RF Line-of-sight Range:
400m@1200bps; 200m@9600bps
RF Effective Rate:
1200/2400/4800/9600/19200/38400/100kbps
Space Channel:
1MHz(Default), (12.5/25KHz/other, Customized )
Bandwidth:
<25KHz
Receiver Sensitivity:
-118dBm@1200bps (1% BER)
NETWORKING
Networking Topology:
Point-to-point, point-to-multipoint
COMPATIBILITY
KYL-220
POWER
Supply Voltage:
3.1~5.5V DC
Transmit Current:
<40mA
Receive Current:
<20mA
Sleep current:
<20uA
GENERAL
Communication Mode:
Half-duplex
Frequency Band:
400-470MHz,868MHz, 915MHz
Channel:
8(default),16/32/64(optional)
Interface:
TTL/UART, Non-Standard RS232/RS485/USB
PHYSICAL PROPERTIES
Size:
40mm×24mm×6mm
Weight:
20g
Antenna Base:
50Ω, SMA
Operating Temperature:
commercial:-30℃~+60℃(TCXO)
Frequency Stability:
±2.5ppm
Fax: +86-755-83408785
[email protected]
www.rf-data.com
zhen KYL Communication Equipment Co
., Ltd
Shen
Shenz
Co.
III: Application of KYL-210:
KYL-210 is suitable for:
* Automatic Meter Reading (AMR);
* Wireless alarm and security systems;
* Building automation, security systems, wireless monitor, remote control and
access control system;
* Wireless data transmission, automatic data collection system;
* Radio modem can be used for Sports training & competition;
* Wireless dishes ordering;
* Wireless POS, PDA wireless smart terminal;
* RF module can be used for electronic bus station and intelligent traffics;
* RF transmitter, Wireless electronic display screen and Queuing machine;
* Wireless telemetry; charging for parking, parking lot;
* Wireless modem automobile inspection and four-wheel orientation;
* Wireless sensor, Industrial wireless remote control and air conditioning remote
controller;
* Data communication in the aspects of railway, oil field, dock and army.
* LED display in thruway and public place;
* Point to multi-point wireless network, wireless on-the-spot bus and automatic
data collection system
IV: How to use the KYL-210
KYL-210 provide RS-232, RS-485 and UART/TTL level interface ports which can
be direct connected with PC, RS485 devices, monolithic processors and other
UART components. Please find the schematic diagram below:
1. Power supply
The factory setting is +5V (needing 3.3V-3.6V, please notify us when placing the
order). Using better ripple factor, KYL-210 transceivers can also share power
supply with other equipment. If possible, a voltage-stabilizing chip with 5V voltage
is much recommended than Switch power supply. But if only switch power supply
is available, the jam caused by switch pulse should be avoided. In addition, the
reliable grounding must be used if there is other device in the system equipment. In
case of failing to connect with the ground, it can form its own grounding but must
be absolutely separated from the municipal electric supply.
Fax: +86-755-83408785
[email protected]
www.rf-data.com
zhen KYL Communication Equipment Co
., Ltd
Shen
Shenz
Co.
2. Connection Definition with terminal
KYL-210 transceivers supply one 9-pin connector (JP1), their definitions and
connection methods with terminals are shown in Table 1.
Table 1: JP1 Pin Definitions and connection methods
Pin No. Signal Name
Function
I/O
Level
1
GND
Grounding of power supply
-
-
2
Vcc
Power supply DC
-
3.1~5.5V
RS232 TXD
Data Transmission
O(output)
RS232
TTL TXD
Data Transmission
O(output)
TTL
RS485 A
IO
-
RS232 RXD
Data Receiving
I(input)
RS232
TTL RXD
Data Receiving
I(input)
TTL
RS485 B
RS485 B
IO
-
5
DGND
Signal Ground
-
-
6
NC
-
-
-
3
RS485 A
4
3. The connection schematic diagram between computer and our
RF module
4. Setting of channel, interface, and data format
Fax: +86-755-83408785
[email protected]
www.rf-data.com
Remarks
Other power
supply need
customized
Choose one
of the three
interface
ports
Choose one
of the three
interface
ports
zhen KYL Communication Equipment Co
., Ltd
Shen
Shenz
Co.
Before using KYL-210, the user needs to make simple configuration to
determine the channel, interface mode and data format based on his own needs.
You can view or change the module's interface baud rate, channel and address
code, parameter setting or reading as per the testing software KYLCOM in the
PC (in products box).
5. Installation dimension:
6. The Function-indicator light
a. The LED indicator light will turn red for 0.5S once switch on.
b. The LED indicator light will turn green continually while receiving data from
air.
c. The LED indicator light will turn red continually when transmitting data into air
after receiving from COM.
d. If the module keeps sleep function, LED indicator light is always dark.
7. Supported protocol and Transmit capability
KYL-210 standard transceivers offer transparent protocol to support various
applications and protocols of users. If you need to decrease his cost or ease the
workload of terminal CPU, we can add other specific functions based on the
transparent protocol, such as addressing, data acquisition, command interpretation,
etc.
8. Sleep function
In order to reduce consumption, KYL-210 transceivers support sleep function. In
sleep mode, the current consumption is less than 20uA.
a. How to use sleep function:
The Pin8 ‘SLP’ in JP1 is the signal of sleep control. At high power level,
transceiver stays in working mode. At low power level (<0.5V), transceiver stays
Fax: +86-755-83408785
[email protected]
www.rf-data.com
zhen KYL Communication Equipment Co
., Ltd
Shen
Shenz
Co.
in sleep mode. The SLP signal can convert transceiver from working to sleep
mode in 1ms after falling edge. If the Sleep signal arrives when the transceiver is
transmitting data, the module will move to sleep mode after finishing
transmission. From sleep moves to working, it takes the transceiver 1ms after
rising edge.
To disable the opened sleep function of KYL-210, the SLP (SLEEP) pin should
be definitely connected with 0 or ground.
b. Attentions about using sleep function:
When the sleep function enabled, or any supply glitches, such as switch dithering,
fire striking or quick switching on and off, may cause the transceiver switch to
wrong sleep mode.
After switching on, users can avoid this error by making a compulsive
restoration once after the CPU delays 100ms.
Sleep Timing Diagram:
9. The attentions of data transmission
a. The delay time (tc) of conversion between transmitting and receiving is less
than 1ms.
Timing diagram:
b. The delay time of transceivers between the first bit sent by TxD to the first
Fax: +86-755-83408785
[email protected]
www.rf-data.com
zhen KYL Communication Equipment Co
., Ltd
Shen
Shenz
Co.
bit received by RxD.
As data processing will be made on user’s data by KYL-210 transceiver using
FEC (Forward Error Correction) or other correction algorithm, when RxD of a
KYL-200L transceiver ‘A’ receives the data, then transmits it, the other one
transceiver ‘B’ will have a delay (ts) to receive and transmit by TxD. Different
RF data rate causes different delay time. Please see the specific delay time
below:
RF Date Rate
(bps)
1200
Delay
Ts(mS)
90
RF Date Rate
(bps)
9600
Delay
Ts(mS)
16
2400
48
19200
10
4800
30
Timing diagram:
c. Error dealing procedure:
To enhance the reliability and stability of user’s systems, a verify bit or a Cyclic
Redundancy Check (CRC) mode is highly recommended to prevent wrong
information while using KYL-210 modules.
d. Large-number data transmission
In theory, when the interface data rate is faster than the RF data rate, KYL-210
transceivers can sent unlimited-long data package, but long packages more than
120B are not recommended. The length of each package should be between
60~100B. We also recommend our users to use Automatic Error Request
Equipment (ARQ) to prevent wrong information.
Reasons
Reasons::
What if the actual transmission BER (Bit Error Rate) is 10-4, 1 packet with 1KB
data which is about 10-thousand bits, is sent, theoretically, at least 1 bit will be
received wrongly, then the 1KB information will never be received correctly.
But if we package the data into 10 packets with 100B for each, when all 10
Fax: +86-755-83408785
[email protected]
www.rf-data.com
zhen KYL Communication Equipment Co
., Ltd
Shen
Shenz
Co.
packets are sent, there will be only 1 packet wrong according to this probability.
After that, resend this wrong packet using ARQ mode. So by resending one more
packet and the efficiency rate is reduced 10%, all data will be absolutely received
correctly.
10. Antenna configuration:
Many appropriative antennas for low power RF modules are selected to meet
different user antenna configurations. Please ask our Sales office for further
information about the antenna’s dimension and performance.
a. Helical SMA antennas
KYL-ANT-433-10-SMA: 100mm helical SMA antennas with high gain and low
cost, reach a long distance.
KYL-ANT-433-3-SMA: 28mm SMA helical antenna with magnetic core, small size,
beautiful appearance (like the mobile phone antenna)
KYL-ANT-433-10-ZSMA: 100mm SMA helical antenna with folding joint, easy for
adjusting the direction and fixing.
b. Magnetic vehicle antenna
KYL-ANT-O433S-300H1.5-SMA: include magnetic antenna base, suitable for
equipment with metal shell, easy for fixing, effective to enhance the transmission
distance.
For more kinds of antennas,please go to our website:
Fax: +86-755-83408785
[email protected]
www.rf-data.com
zhen KYL Communication Equipment Co
., Ltd
Shen
Shenz
Co.
http://www.rf-data.com/Products_list_en.asp?classid=163
If you have special requirements on antennas, please specify, we can design and
produce for you individually.
V. Description of type
KYL-210-96
Manufacture
Typ
Baud Rate
12:1200bps
24:2400bps
48:4800bps
96:9600bps
192:19200bps
Fax: +86-755-83408785
[email protected]
www.rf-data.com