Intelligent Power Devices (IPDs) MIP0221SY, MIP0222SY, MIP0223SY, MIP0224SY, MIP0225SY, MIP0226SY, MIP0227SY Silicon MOS IC ■ Features ● Single chip IC with high breakdown voltage power MOS FET and CMOS control circuits ● Allowing to input worldwide mains (AC 85 to 274V) ● A pulse-by-pulse overcurrent protection circuit and a timer autorestart circuit are integrated. unit: mm 10.5±0.5 ● Switching power supply (to 90W) ● AC adaptor ● Battery charger Symbol Unit 700 V 0.8±0.1 2.54±0.3 VD Control voltage VC 8 MIP0221SY V 0.3 1 2 3 MIP0223SY 1.15 ID MIP0224SY 1.72 MIP0225SY 2.4 MIP0226SY 2.9 MIP0227SY 3.5 0.6±0.1 5.08±0.5 MIP0222SY 0.585 Output current 2.5±0.2 9.3 13.5±0.5 Ratings Solder Dip Parameter φ3.7±0.1 1.4±0.1 ■ Absolute Maximum Ratings (Ta = 25 ± 3°C) Drain voltage 2.8±0.2 15.4±0.3 4.2±0.3 ■ Applications 1.4±0.1 8.0±0.2 6.8±0.1 2.8±0.2 1.5±0.2 4.5±0.2 9.5±0.2 1: Control 2: Source 3: Drain EIAJ: SC-46 TO-220 Type Package (a) A Control current IC 0.1 mA Channel temperature Tch 150 °C Storage temperature Tstg −55 to +150 °C ■ Block Diagram Auto-restart Control pin Drain pin Shutdown/Auto-restart Auto-restart current-source Shunt regulator 5.7V 4.7V + Power supply for internal circuit + - 1/2 1/2 1/2 Ron X ID + - Timer auto-restart circuit PWM control current Thermal shutdown circuit S R Restarting trigger circuit Q Power MOS FET Q Max Duty Clock Sawtooth RE Low pass filter S + R Q Q Leading edge blanking Minimum ON-time delay circuit Source pin 1 Intelligent Power Devices (IPDs) MIP0221SY/0222SY/0223SY/0224SY/0225SY/0226SY/0227SY ■ Electrical Characteristics (TC = 25 ± 2°C) Parameter Control functions Auto-restart min typ max Unit Output frequency fOSC Symbol IC = 2mA 90 100 110 kHz Maximum duty cycle MAXDC IC = 2mA 64 67 70 % Minimum duty cycle MINDC IC = 10mA 3 % Control pin charging current IC Auto-restart threshold voltage Lockout threshold voltage Auto-restart hysteresis voltage ∆VC Auto-restart duty cycle TSW/TTIM current limit Circuit protection VC = 0 mA VC(on) 5 5.7 6.3 V VC(off) 4 4.7 5.3 V 0.5 1 1.5 V 5 8 % 1.2 Hz MIP0221SY 0.23 0.25 9.28 MIP0222SY 0.45 0.5 0.55 MIP0223SY 0.9 1 1.1 MIP0224SY ILIMIT 1.35 1.5 1.65 MIP0225SY 1.8 2 2.2 MIP0226SY 2.25 2.5 2.75 MIP0227SY 2.7 3 3.3 A Leading edge blanking delay ton(BLK) IC = 3mA 0.25 µs Current limit delay td(OCL) IC = 3mA 0.1 µs IC = 3mA Power-up reset threshold voltage VC reset ON-state resistance Output 130 140 150 °C 2.3 3.3 4.2 V MIP0221SY ID = 0.025A 31.2 36 MIP0222SY ID = 0.1A 15 18 MIP0223SY ID = 0.2A 8.5 10 MIP0224SY RDS(on) ID = 0.3A 5.8 6.7 MIP0225SY ID = 0.3A 4 5 MIP0226SY ID = 0.3A 3.3 4 Ω ID = 0.3A 2.6 3 OFF-state current IDSS VDS = 650V, Output MOS FET disabled 0.01 0.25 mA Breakdown voltage VDSS ID = 0.25mA, Output MOS FET disabled 700 Rise time tr 0.1 0.2 µs Fall time tf 0.1 0.2 µs Drain supply voltage VD(MIN) Shunt regulator voltage VC IC = 3mA 5.4 5.7 6.1 V ICD1 Output MOS FET enabled 0.7 1.4 1.8 mA ICD2 Output MOS FET disabled 0.5 0.8 1.1 mA MIP0227SY Control supply/discharge current 2 −1.2 −1.5 − 0.8 Thermal shutdown temperature TOTP Power supply voltage −2.4 −1.9 −2 VC = 5V fTIM Auto-restart frequency Self-protection Conditions V 36 V