ETC OM-371-A8

Reflective Type Opto Sensor
OM-371-A8
INSTALLATION HOLE DIMENSIONS (REFERENCE)
Tolerance: ±0.1mm
Connector 175489-3 (AMP)
4.7
Optical Center
Symbol
1
Collector
2
Cathode—
Emitter
3
Anode
4.7
3.7
1
Terminal No.
2.3
11.7
11.7
7.8
15
11
3.2
1.4
3.2
15
11
3.7
5.8
No. 1
Plate Thickness
t = 1.2 mm
Plate Thickness
t = 1 mm
PARTS CONSTRUCTION LIST
No.
Description
Qty. Used
Materials
Remarks
1
Case
1
Polycarbonate
Flammability: UL94V-2 or more
2
Inner Case
1
Polycarbonate
Flammability: UL94V-2 or more
3
PCB
1
CEM-3
Flammability: UL94V-0
4
Connector
1
175489-3
AMP (Natural)
5
Light Emitting Diode
1
-
GaAs Infrared Light Emitting Diode
6
Detector
1
-
Phototransistor
ALEPH INTERNATIONAL CORPORATION
A Member of Nippon Aleph Corporation
Tel: (800) 423-5622
Fax: (818) 365-7274
http://www.aleph-usa.com
[email protected]
Reflective Type Opto Sensor
OM-371-A8
HANDLING NOTES
1. Careful attention should be made to avoid deformation of components.
2. Environmental air must be free from corrosive gasses such as hydrogen sulfide or salt water air.
3. Mount sensor away from direct sunlight and incandescent light.
4. The side with emitting and receiving elements should be handled very carefully.
5. Insert and remove connectors at room temperature only.
6. Degrading LED radiant power should be addressed if sensor is used repeatedly over a long period of time.
7. This product was designed for use in the following applications:
OA equipment, video equipment, consumer electronics, communication equipment, measuring equipment, and control equipment.
When designing a system for safety and reliability, be sure to incorporate fail-safe and other appropriate
measures.
FOOTNOTES
*1: Ta > 25 °C
*2: ?? ≤ 100µs; ?? = 100 Hz
*3: ??
*4:
L = 6 (mm)
OM-371-A8
Paper with reflection of 90%
ALEPH INTERNATIONAL CORPORATION
A Member of Nippon Aleph Corporation
Tel: (800) 423-5622
Fax: (818) 365-7274
http://www.aleph-usa.com
[email protected]