RoHS Power Chip Inductors Dimensions: Tolerance (%) Inches (mm) Allied Part Number Inductance (µh) PC0301-2R2M-RC 2.2 20 100 0.33 1.08 PC0301-3R3M-RC 3.3 20 100 0.52 0.92 PC0301-4R7M-RC 4.7 20 100 0.62 0.74 PC0301-6R8M-RC 6.8 20 100 0.87 0.63 PC0301-8R2M-RC 8.2 20 100 1.00 0.58 PC0301-100M-RC 10 20 100 1.14 0.50 PC0301-120M-RC 12 20 100 1.44 0.46 PC0301-150M-RC 15 20 100 1.60 0.43 PC0301-220M-RC 22 20 100 1.90 0.35 27 20 2.85 0.32 Test Freq. KHz,0.1v PC0301 DCR Max. (Ω) IDC (A) Features • Unshielded SMD low cost design • Designed for high current applications • Accurate and consistent dimensions for auto insertion • Excellent for use in DC-DC converter application • High saturation for surface mounting Electrical Inductance Range: 2.2µh to 27µh Tolerance: 20% over entire range Operating Temp: -40ºC ~ +85ºC IDC: Current at which Inductance drops 10% of original value Resistance to Soldering Heat PC0301-270M-RC 100 Pre-Heat 150ºC, 1 Min. Solder Composition: Sn/Ag3.0/Cu0.5 Solder Temp: 260ºC +/- 5ºC for 10 sec ± 1 sec. Test Equipment (L): PM3260 / HP44284A / HP4285A (RDC): Chen Hwa 502BC (IDC): Chen Hwa 1061 + Chen Hwa 301A or HP4284A + HP42841A All specifications subject to change without notice. Physical Packaging: 1000 pieces per 7 inch reel. Marking: EIA Inductance Code 714-665-1140 ALLIED COMPONENTS INTERNATIONAL REVISED 7/28/09 15 www.alliedcomponents.com