DISCRETE SEMICONDUCTORS DATA SHEET 1/3 page (Datasheet) M3D054 PMLL5225B to PMLL5267B Voltage regulator diodes Product specification Supersedes data of November 1993 1996 Apr 26 Philips Semiconductors Product specification Voltage regulator diodes PMLL5225B to PMLL5267B FEATURES DESCRIPTION • Total power dissipation: max. 500 mW Low-power voltage regulator diodes in small hermetically sealed glass SOD80C SMD packages. The series consists of 43 types with nominal working voltages from 3.0 to 75 V. • Tolerance series: ±5% • Working voltage range: nom. 3.0 to 75 V • Non-repetitive peak reverse power dissipation: max. 40 W. k handbook, 4 columns a APPLICATIONS MAM215 • Low-power voltage stabilizers or voltage references. The cathode is indicated by a yellow band. Fig.1 Simplified outline (SOD80C) and symbol. LIMITING VALUES In accordance with the Absolute Maximum Rating System (IEC 134). SYMBOL PARAMETER CONDITIONS MIN. MAX. − 250 UNIT IF continuous forward current IZSM non-repetitive peak reverse current tp = 100 µs; square wave; Tj = 25 °C prior to surge mA Ptot total power dissipation Tamb = 25 °C; note 1 − 500 PZSM non-repetitive peak reverse power dissipation tp = 100 µs; square wave; Tj = 25 °C prior to surge; see Fig.3 − 40 W tp = 8.3 ms; square wave; Tj ≤ 55 °C prior to surge − 10 W see Table “Per type” mW Tstg storage temperature −65 +200 °C Tj junction temperature −65 +200 °C MIN. MAX. − 1.1 Note 1. If flanges are kept at Tflange ≤ 75 °C. ELECTRICAL CHARACTERISTICS Total series Tj = 25 °C; unless otherwise specified. SYMBOL VF 1996 Apr 26 PARAMETER forward voltage CONDITIONS IF = 200 mA; see Fig.4 2 UNIT V TEMP. COEFF. SZ (%/K) at IZ(2) DIODE CAP. REVERSE CURRENT TEST Cd (pF) at REVERSE CURRENT VOLTAGE IZtest (mA) at f = 1 MHz; at VR = 0 V IR (µA) V NON-REPETITIVE PEAK REVERSE CURRENT IZSM (A) at tp = 100 µs; Tamb = 25 °C R 3 MAX. MAX. PMLL5225B 3.0 1600 −0.075 20 450 50 1.0 6.0 PMLL5226B 3.3 1600 −0.070 20 450 25 1.0 6.0 PMLL5227B 3.6 1700 −0.065 20 450 15 1.0 6.0 PMLL5228B 3.9 1900 −0.060 20 450 10 1.0 6.0 PMLL5229B 4.3 2000 ±0.055 20 450 5 1.0 6.0 PMLL5230B 4.7 1900 ±0.030 20 450 5 1.5 6.0 PMLL5231B 5.1 1600 ±0.030 20 300 5 2.0 6.0 PMLL5232B 5.6 1600 +0.038 20 300 5 3.0 6.0 PMLL5233B 6.0 1600 +0.038 20 300 5 3.5 6.0 PMLL5234B 6.2 1000 +0.045 20 200 5 4.0 6.0 PMLL5235B 6.8 750 +0.050 20 200 3 5.0 6.0 PMLL5236B 7.5 500 +0.058 20 150 3 6.0 4.0 PMLL5237B 8.2 500 +0.062 20 150 3 6.5 4.0 PMLL5238B 8.7 600 +0.065 20 150 3 6.5 3.5 PMLL5239B 9.1 600 +0.068 20 150 3 7.0 3.0 600 +0.075 20 90 3 8.0 3.0 10 MAX. MAX. 11 600 +0.076 20 85 2 8.4 2.5 PMLL5242B 12 600 +0.077 20 85 1 9.1 2.5 PMLL5243B 13 600 +0.079 9.5 80 0.5 9.9 2.5 PMLL5244B 14 600 +0.082 9.0 80 0.1 10.0 2.0 PMLL5245B 15 600 +0.082 8.5 75 0.1 11.0 2.0 PMLL5246B 16 600 +0.083 7.8 75 0.1 12.0 1.5 PMLL5247B 17 600 +0.084 7.4 75 0.1 13.0 1.5 PMLL5248B 18 600 +0.085 7.0 70 0.1 14.0 1.5 PMLL5249B 19 600 +0.086 6.6 70 0.1 14.0 1.5 PMLL5250B 20 600 +0.086 6.2 60 0.1 15.0 1.5 Product specification PMLL5241B PMLL5225B to PMLL5267B NOM. PMLL5240B MAX. (V) Philips Semiconductors TYPE No. WORKING DIFFERENTIAL VOLTAGE RESISTANCE VZ (V)(1) rdif (Ω) at IZtest at IZtest Voltage regulator diodes 1996 Apr 26 Per type Tj = 25 °C; unless otherwise specified. DIODE CAP. REVERSE CURRENT TEST Cd (pF) CURRENT at REVERSE IZtest (mA) at f = 1 MHz; VOLTAGE at VR = 0 V IR (µA) V NON-REPETITIVE PEAK REVERSE CURRENT IZSM (A) at tp = 100 µs; Tamb = 25 °C R NOM. MAX. MAX. MAX. MAX. (V) MAX. 4 22 600 +0.087 5.6 60 0.1 17.0 1.25 PMLL5252B 24 600 +0.088 5.2 55 0.1 18.0 1.25 PMLL5253B 25 600 +0.089 5.0 55 0.1 19.0 1.25 PMLL5254B 27 600 +0.090 4.6 50 0.1 21.0 1.0 PMLL5255B 28 600 +0.091 4.5 50 0.1 21.0 1.0 PMLL5256B 30 600 +0.091 4.2 50 0.1 23.0 1.0 PMLL5257B 33 700 +0.092 3.8 45 0.1 25.0 0.9 PMLL5258B 36 700 +0.093 3.4 45 0.1 27.0 0.8 PMLL5259B 39 800 +0.094 3.2 45 0.1 30.0 0.7 PMLL5260B 43 900 +0.095 3.0 40 0.1 33.0 0.6 PMLL5261B 47 1000 +0.095 2.7 40 0.1 36.0 0.5 PMLL5262B 51 1100 +0.096 2.5 40 0.1 39.0 0.4 PMLL5263B 56 1300 +0.096 2.2 40 0.1 43.0 0.3 PMLL5264B 60 1400 +0.097 2.1 40 0.1 46.0 0.3 PMLL5265B 62 1400 +0.097 2.0 35 0.1 47.0 0.3 PMLL5266B 68 1600 +0.097 1.8 35 0.1 52.0 0.25 PMLL5267B 75 1700 +0.098 1.7 35 0.1 56.0 0.2 Notes 1. VZ is measured with device at thermal equilibrium while held in clips at 10 mm from body in still air at 25 °C. 2. For types PMLL5225B to PMLL5242B the IZ current is 7.5 mA; for PMLL5243B and higher IZ = IZtest. SZ values valid between 25 °C and 125 °C. Product specification PMLL5225B to PMLL5267B PMLL5251B Philips Semiconductors TEMP. COEFF. SZ (%/K) at IZ(2) Voltage regulator diodes 1996 Apr 26 TYPE No. WORKING DIFFERENTIAL VOLTAGE RESISTANCE VZ (V)(1) rdif (Ω) at IZtest at IZtest Philips Semiconductors Product specification Voltage regulator diodes PMLL5225B to PMLL5267B THERMAL CHARACTERISTICS SYMBOL PARAMETER CONDITIONS VALUE UNIT Rth j-tp thermal resistance from junction to tie-point lead length 10 mm 300 K/W Rth j-a thermal resistance from junction to ambient lead length max.; see Fig.2 and note 1 380 K/W Note 1. Device mounted on a printed circuit-board without metallization pad. 1996 Apr 26 5 Philips Semiconductors Product specification Voltage regulator diodes PMLL5225B to PMLL5267B GRAPHICAL DATA MBG930 103 handbook, full pagewidth δ=1 Rth j-a 0.75 0.50 0.33 0.20 (K/W) 102 0.10 0.05 0.02 0.01 ≤0.001 10 tp δ= T 1 10−1 1 102 10 103 104 tp T tp (ms) 105 Fig.2 Thermal resistance from junction to ambient as a function of pulse duration. MBG801 103 handbook, halfpage MBG803 250 handbook, halfpage PZSM (W) IF (mA) 102 125 (1) 10 (2) 1 10−1 1 duration (ms) 0 0.5 10 (1) Tj = 25 °C (prior to surge). (2) Tj = 150 °C (prior to surge). Fig.3 1996 Apr 26 0.75 VF (V) 1.0 Tj = 25 °C. Maximum permissible non-repetitive peak reverse power dissipation versus duration. Fig.4 6 Forward current as a function of forward voltage; typical values. Philips Semiconductors Product specification Voltage regulator diodes PMLL5225B to PMLL5267B PACKAGE OUTLINE handbook, full pagewidth 1.60 O 1.45 0.3 0.3 3.7 3.3 MBA390 - 2 Dimensions in mm. Fig.5 SOD80C. DEFINITIONS Data sheet status Objective specification This data sheet contains target or goal specifications for product development. Preliminary specification This data sheet contains preliminary data; supplementary data may be published later. Product specification This data sheet contains final product specifications. Limiting values Limiting values given are in accordance with the Absolute Maximum Rating System (IEC 134). Stress above one or more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation of the device at these or at any other conditions above those given in the Characteristics sections of the specification is not implied. Exposure to limiting values for extended periods may affect device reliability. Application information Where application information is given, it is advisory and does not form part of the specification. LIFE SUPPORT APPLICATIONS These products are not designed for use in life support appliances, devices, or systems where malfunction of these products can reasonably be expected to result in personal injury. Philips customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Philips for any damages resulting from such improper use or sale. 1996 Apr 26 7