8-PIN SOP, SLOW SWITCHING TYPE, 260 V BREAK DOWN VOLTAGE PS7622A-2A 2-CH OPTICAL COUPLED MOS FET FEATURES DESCRIPTION • 2 CHANNEL TYPE 1a + 1a output The PS7622-2A is a solid state relay containing GaAs LEDs on light emitting side (input side) and MOS FETs on the output side. • LOW LED OPERATING CURRENT IF = 1 mA • DESIGNED FOR AC/DC SWITCHING LINE CHANGER • SMALL AND THIN PACKAGE 8-pin SOP, Height = 2.1 mm It is suitable for analog signal control because of it's low offset and high linearity. APPLICATIONS • LOW OFFSET VOLTAGE • ORDERING NUMBER OF TAPING PRODUCT PS7622A-2A-F3,F4 • EXCHANGE EQUIPMENT (FAX, MODEM, OCU + SLIC, ETC.) • MEASUREMENT EQUIPMENT • FA/OA EQUIPMENT ELECTRICAL CHARACTERISTICS1 (TA = 25°C) PART NUMBER Coupled MOS Diode FET SYMBOL PS7622A-2A PARAMETERS UNITS VF Forward Voltage, IF = 1.4 mA V IR Reverse Current, VR = 5 V µA ILOFF Off-state Leakage Current, VD = 260 V µA COUT Output Capacitance, VD = 0 V, f = 1 MHz MIN TYP MAX 1.2 1.4 5.0 1.0 pF/ch 122 IFON LED On-state Current, IL = 200 mA RON On-state Resistance, IF = 1.4 mA, IL = 10 mA mA Ω 3.5 1.0 5.0 TON Turn-on Time1, IF = 1.4 mA, V0 = 60 V, RL = 1.5 kΩ, PW = 50 ms ms 10 20 TOFF Turn-off Time1, IF = 1.4 mA, V0 = 60 V, RL = 1.5 kΩ, PW = 50 ms ms 7.0 12 TR Rise Time, IF = 1.4 mA, V0 = 60 V, RL = 1.5 kΩ, PW = 50 ms ms TF Fall Time, IF = 1.4 mA, V0 = 60 V, RL = 1.5 kΩ, PW = 50 ms ms 0.80 0.4 RI-O Isolation Resistance, VI-O = 1.0 kVDC Ω 109 CI-O Isolation Capacitance, V = 0 V, f = 1 MHz pF 0.4 Notes: 1. Test Circuit for Switching Time IF VL Pulse Input 50 % Input 0 Vo = 5 V 90 % Vo monitor Input monitor Output Rin RL tr ton 10 % tf toff California Eastern Laboratories PS7622A-2A 0.4±0.3 9.08±0.5 7.0±0.3 2.54 0.40 +0.10 –0.05 8 7 6 PACKAGE 8-pin SOP 5 1. 2. 3. 4. UNITS MIN TYP MAX mA 1 1.4 20 V 0 0.5 1 2 3 ORDERING INFORMATION PART NUMBER PS7622A-2A PS7622A-2A-F3 PS7622A-2A-F4 0.15+0.10 –0.05 0.5±0.3 PS7622A-2A SYMBOLS PARAMETERS IF LED Operating Current VF LED off Voltage 4.4 0.25 M TOP VIEW RECOMMENDED OPERATING CONDITIONS PART NUMBER PS7622A-2A 2.05 +0.08 –0.05 SYMBOLS PARAMETERS UNITS RATINGS Diode IF Forward Current mA 50 VR Reverse Voltage V 5.0 PD Power Dissipation mW/ch 50 IFP Peak Forward Current2 A 1 MOS FET VL Break Down Voltage V 260 IL Countinuous Load Current mA 200 ILP Pulse Load Current3 mA 400 PD Power Dissipation mW/ch 180 Coupler BV Isolation Voltage4 Vr.m.s. 1500 PT Total Power Dissipation mW 460 TOP Operating Ambient Temp. °C -40 to +80 TSTG Storage Temperature °C -40 to +100 Notes: 1. Operation in excess of any one of these parameters may result in permanent damage. 2. PW = 100 µs, Duty Cycle = 1%. 3. PW = 100 ms, 1 shot 4. AC voltage for 1 minute at TA = 25 °C, RH = 60% between input and output. OUTLINE DIMENSIONS (Units in mm) 0.05 +0.08 –0.05 ABSOLUTE MAXIMUM RATINGS1 (TA = 25°C) PACKING STYLE Magazine case 45 pcs Embossed Tape 1500 pcs/reel Notes: 1. For the application of the Safety Standard, following part number should be used. APPLICATION PART NUMBER1 PS7622A-2A 4 LED Anode LED Cathode LED Anode LED Cathode 5. 6. 7. 8. MOS FET MOS FET MOS FET MOS FET PS7622A-2A TYPICAL PERFORMANCE CURVES (TA = 25°C, unless otherwise specified) MAXIMUM LOAD CURRENT vs. AMBIENT TEMPERATURE MAXIMUM FORWARD CURRENT vs. AMBIENT TEMPERATURE 300 Maximum Load Current, IL (mA) Maximum Forward Current, IF (mA) 100 80 60 40 20 0 –25 25 0 50 75 80 250 200 150 100 50 0 –25 100 25 0 50 75 80 Ambient Temperature, TA (ºC) Ambient Temperature, TA (ºC) FORWARD VOLTAGE vs. AMBIENT TEMPERATURE OUTPUT CAPACITANCE vs. APPLIED VOLTAGE 100 250 1.6 Output Capacitance Cout (pF) Forward Voltage, VF (V) f = 1 MHz 1.4 IF = 50 mA 30 mA 1.2 20 mA 10 mA 5 mA 1.0 1 mA 0.8 –25 0 25 50 75 200 150 100 50 0 100 10 20 30 40 50 Ambient Temperature, TA (ºC) Applied Voltage, VD (V) OFF-STATE LEAKAGE CURRENT vs. AMBIENT TEMPERATURE LOAD CURRENT vs. LOAD VOLTAGE IF = 10 mA VD = 260 V 10-7 10 -8 10-9 10 200 Load Current, IL (mA) Off-state Leakage Current, ILoff 10-6 100 -1.0 –0.5 0 0.5 –100 -10 –200 10 -11 0 20 40 60 80 Ambient Temperature, TA (ºC) Remarks: The graphs indicate nominal characteristics. 60 Load Voltage, VL (V) 1.0 PS7622A-2A TYPICAL PERFORMANCE CURVES (TA = 25°C, unless otherwise specified) ON-STATE RESISTANCE DISTRIBUTION NORMALIZED ON-STATE RESISTANCE vs. AMBIENT TEMPERATURE 30 Normalized to 1.0 at TA = 25 ºC, IF = 10 mA IL = 10 mA 2.5 n = 50 pcs, IF = 10 mA, IL = 10 mA 25 2.0 Number (pcs) Normalized On-state Resistance, Ron 3.0 1.5 1.0 0.5 20 15 10 5 0.0 –25 25 0 50 75 0 100 3.0 3.2 3.4 3.6 Ambient Temperature, TA (ºC) On-State Resistance, Ron (Ω) TURN-ON TIME vs. FORWARD CURRENT TURN-OFF TIME vs. FORWARD CURRENT 40 25 VO = 60 V, RL = 1.5 kΩ Turn-off Time, toff (ms) Turn-on Time, ton (ms) VO = 60 V, RL = 1.5 kΩ 30 20 10 0 10 5 20 15 10 5 0 15 5 15 10 Forward Current, IF Forward Current, If (mA) TURN-ON TIME DISTRIBUTION TURN-OFF TIME DISTRIBUTION 30 30 n = 50 pcs, IF = 1.4 mA, Vo = 60 V, RL = 1.5 KΩ 20 15 10 n = 50 pcs, IF = 1.4 mA, Vo = 60 V, RL = 1.5 KΩ 25 Number (pcs) 25 Number (pcs) 3.8 20 15 10 5 5 0 0 6 8 10 12 14 Turn-on Time, ton (ms) Remarks: The graphs indicate nominal characteristics. 5 6 7 8 Turn-off Time, toff (ms) 9 PS7622A-2A TYPICAL PERFORMANCE CURVES (TA = 25°C) NORMALIZED TURN-OFF TIME vs. AMBIENT TEMPERATURE NORMALIZED TURN-ON TIME vs. AMBIENT TEMPERATURE 3.0 Normalized to 1.0 at TA = 25 ºC, IF = 10 mA, VO = 5 V, RL = 500 Ω 2.5 2.0 Normalized Turn-off Time, toff Normalized Turn-on Time, ton 3.0 1.5 1.0 0.5 0.0 –25 0 25 50 75 Normalized to 1.0 at TA = 25 ºC, IF = 1.4 mA, VO = 60 V, RL = 1.5 kΩ 2.5 2.0 1.5 1.0 0.5 0.0 –25 100 Ambient Temperature, TA (ºC) 0 25 50 100 75 Ambient Temperature, TA (ºC) TAPING SPECIFICATIONS (Units in mm) OUTLINE AND DIMENSIONS (TAPE) 1.55±0.1 7.6±0.1 φ13.0±1.0 2.0±0.5 φ330 10.45±0.1 16.0±0.3 2.8±0.1 φ100±5.0 φ21.0±0.8 2.5 1.75±0.1 1.55±0.1 7.5±0.1 2.0±0.1 4.0±0.1 OUTLINE AND DIMENSIONS (REEL) 0.3 12.0±0.1 16.4 +2.0 –0.0 Notes: 1. Packing : 1500 pcs/reel F3, F4 TAPE DIRECTION PS7622A-2A-F3 PS7622A-2A-F4 PS7622A-2A RECOMMENDED SOLDERING CONDITIONS (1) Infrared reflow soldering • Peak reflow temperature 235 ˚C (package surface temperature) • Time of temperature higher than 210 ˚C 30 seconds or less • Number of reflows Two • Flux Rosin flux containing small amount of chlorine (The flux with a max. chlorine content of 0.2 Wt % is recommended Package Surface Temperature T (˚C) Recommended Temperature Profile of Infrared Reflow (heating) to 10 s 235 ˚C (peak temperature) 210 ˚C to 30 s 100 to 160 ˚C 60 to 120 s (preheating) Time (s) (2) Dip soldering • Temperature 260 ˚C or below (molten solder temperature) • Time 10 seconds or less • Number of times One (Allowed to be dipped in solder including plastic mold portion.) • Flux Rosin flux containing small amount of chlorine (The flux with a max. chlorine content of 0.2 Wt % is recommended.) ∗ (3) Cautions • Fluxes Avoid removing the residual flux with freon-based and chlorinebased cleaning solvent. ∗ ∗ : Portion of frame Avoid shorting between portion of frame and leads. Life Support Applications These NEC products are not intended for use in life support devices, appliances, or systems where the malfunction of these products can reasonably be expected to result in personal injury. The customers of CEL using or selling these products for use in such applications do so at their own risk and agree to fully indemnify CEL for all damages resulting from such improper use or sale. EXCLUSIVE NORTH AMERICAN AGENT FOR RF, MICROWAVE & OPTOELECTRONIC SEMICONDUCTORS CALIFORNIA EASTERN LABORATORIES • Headquarters • 4590 Patrick Henry Drive • Santa Clara, CA 95054-1817 • (408) 988-3500 • Telex 34-6393 • FAX (408) 988-0279 24-Hour Fax-On-Demand: 800-390-3232 (U.S. and Canada only) • Internet: http://WWW.CEL.COM 10/30/2001 DATA SUBJECT TO CHANGE WITHOUT NOTICE