ECO-PACTM 1 Three Phase Rectifier Bridge PSD 91F with fast Recovery Epitaxial Diode (FRED) Preliminary Data Sheet Symbol I*dAV IdAVM IFSM ∫ i dt 2 Test Conditions TVJ = 45 °C t = 10 ms (50 Hz), sine 200 A TVJ = TVJM 74 t = 10 ms (50 Hz), sine 170 A 90 t = 8.3 ms (60 Hz), sine VR = 0 220 t = 8.3 ms (60 Hz), sine 190 A A • • • • • Package with DCB ceramic base plate • UL registered, E 148688 Isolation voltage 3000 V∼ Planar glass passivated chips Low forward voltage drop Leads suitable for PC board soldering 200 A²s TVJ = TVJM t = 10 ms (50 Hz), sine 145 A²s Applications °C °C • • V∼ • • VR = 0 t = 8.3 ms (60 Hz), sine VR = 0 Weight typ. Symbol Test Conditions 150 -40... + 150 150 IISOL ≤ 1 mA t=1s -40... + 125 3000 3600 (M4) VR = VRRM, TVJ = TVJM 1.5 - 1.8 14 - 16 16 TVJ = 25 °C For power-loss calculations only ≤ ≤ Nm lb.in. g V 1.31 15 IF=50A; -diF/dt=100A/µs; VR=100V typ. 6 IF=1A; -diF/dt=200A/µs; VR=30V; typ.40 Creeping distance on surface Creeping distance in air Max. allowable acceleration V∼ 2.71 IRM TVJ= 25°C °C mA RthJK L=0.05 mH; TVJ= 100°C A²s 1.0 0.25 ≤ per diode; DC per module per diode; DC per module A²s Characteristic Value VR = VRRM, TVJ = 25°C IF = 30 A, 205 t = 8.3 ms (60 Hz), sine Mounting torque ds dA a A Features t = 10 ms (50 Hz), sine Md trr A TVJ = 45 °C 50/60 Hz, RMS t = 1 min VF VTO rT RthJC Maximum Ratings (per module) VR = 0 = 74 A = 800 - 1200 V = 40 ns K - TC = 85 °C, TVJ TVJM Tstg VISOL IR + ~H ~A ~N VRSM VRRM Type VDSM VDRM (V) (V) 800 800 PSD 91F/08 1200 1200 PSD 91F/12 IdAV VRRM trr V mΩ 0.9 0.15 1.2 K/W K/W K/W A 0.2 Data according to IEC 60747 refer to a single diode unless otherwise stated *- for resistive load at bridge output mA 11.2 9.7 50 Supplies for DC power equipment Input and output rectifier for high frequency Battery DC power supplies Field supply for DC motors Advantages • • • • • Easy to mount with two screws Space and weight savings Improved temperature and power cycling capability Low noise switching Small and light weight Package style and outline Dimensions in mm (1mm = 0.0394“) K/W ns mm mm m/s² 2005 POWERSEM reserves the right to change limits, test conditions and dimensions POWERSEM GmbH, Walpersdorfer Str. 53 D - 91126 Schwabach Phone: 09122 - 9764 - 0 FAX: 09122 - 9764 - 20